VBSA awarded ECOVADIS label
Banner
Suction cup in good condition - Please note: sold individually
Only cosmetic defects shown in the photos are present - 1 Only one item available
2nd LIFE warranty: 6 months
This piston suction cup is specially designed for installing and removing automotive glass. Its ergonomic handle ensures a secure and comfortable grip, even when handling large glass surfaces.
It uses a piston system to efficiently create a vacuum, providing strong adhesion to the glass.
Lifting capacity: 62 kg
Diameter: 150 mm
Weight: 0.700 kg
Type: Manual piston suction cup
For optimal use:
Recommended dry run: First, perform a dry test fitting to place reference marks that will help ensure correct positioning of the glass.
Suction cup placement: Position two suction cups as far apart as possible while maintaining full control over the glass.
Creating the vacuum: Tighten the piston until the red line (indicator ring) appears to ensure maximum suction.
Installation and removal of automotive windshields and windows
Handling of large flat glass surfaces
Ideal for auto glass workshops, body shops, and vehicle repair professionals
This piston suction cup is specially designed for installing and removing automotive glass. Its ergonomic handle ensures a secure and comfortable grip, even when handling large glass surfaces. It uses a piston system to efficiently create a vacuum, providing strong adhesion to the glass. Technical Specifications
Usage TipsFor optimal use:
Applications
|
Piston Suction Cups – Diameter 150 mm -load capacity 62kg
€0.00 |
Reference: NSE-825
Telescopic Windshield Rack, 5 compartments. L: 800 mm x W: 540 mm x H: 635 mm Maximum height: 970 mm Weight: 22 kg Load capacity: 200 kg These windshield racks allow you to transport your windows safely, saving you the hassle of loading bulky cardboard boxes in the future. The racks are foldable, so take up very little space when empty. Adjustable to 3...
Reference: CHAMB
The microfiber for windows and polishing 40 x 40 cm is the ideal tool for high-precision cleaning applications. With its composition of 70% polyester and 30% polyamide, this high-tech microfiber offers exceptional performance for cleaning car windows and polishing automotive surfaces. It is an effective replacement for traditional chamois leathers and...
Reference: SB-880
When working with glass, wearing protective eyewear is essential to ensure eye safety against shards and debris. Our shatterproof glasses offer side and front protection thanks to their ergonomic design. They can be worn over most prescription glasses, ensuring optimal comfort for all users. Features: - Complete protection: Protects the eyes against...
Reference: 768
Effectively remove traces of oil, insects and dust with the foam-based 768 glass/windscreen cleaner. Ideal for use in industry, the automotive sector and construction, this product ensures impeccable cleanliness of glass surfaces. Characteristics: Powerful action: Dissolves traces of oil, insects and dirt in an instant Multi-purpose: Suitable for...
Reference: VP-230
Heavy-Duty Piston Suction Cup Ø 230 mm – Lifting Capacity up to 380 kg Looking for a reliable suction cup for heavy glass handling? Our Ø 230 mm piston suction cup is engineered for professionals who demand maximum lifting power, grip, and durability. Whether you're transporting bus windshields, curved glazing panels, or large flat glass, this suction cup...
Reference: ULTRAPOSE-EVOLUTION
Brand: L'ULTRAPOSE
This product has received significant recognition, having won the Bodywork of the Year 2017 award, which is a testament to its quality and innovation in the field. This system has several features and advantages that make it particularly attractive to professionals in the automotive bodywork and glazing industry: Motorised system for removing and...
Reference: VP-230SPECIALE
Ø 230 mm Piston Suction Cup – For Heavy Loads and Curved Glass Surfaces Designed for handling very heavy loads up to 350 kg, this professional Ø 230 mm suction cup is ideal for working with highly curved glass, such as bus windshields. Its built-in manual piston efficiently creates a vacuum, ensuring strong adhesion even on complex or curved surfaces. The...
Reference: VP-205
SOLD INDIVIDUALLY – DELIVERED IN A CARRYING CASE This piston suction cup, with a 205 mm diameter, is specifically designed for heavy-duty lifting and handling. Its piston mechanism creates a vacuum for powerful and secure adhesion, with a lifting capacity of up to 260 kg. It is especially suitable for transporting bus windshields and other large glass...
Reference: GEZ-150-1
Vacuum lifterØ 150 mm REPAREGLASSThese vacuum lifter have been specially designed for windsheild setting and removal.Their unique shape allows a good hand holding. The flowing shape and the smooth surface of the handles allow a greater control of large windows.To install a windshield, we ercommend beginning by doing a test. The setting of the windsheild...
Reference: FIX-5019
Brand: REPAREGLASS
This replacement suction cup is specially designed to ensure reliable and stable attachment of your injection bridge during windshield repairs. It is compatible with several bridge models: Ref. 2000, for flat windshields (buses, trucks) Ref. 367, included in the REPAR'VIT® ref. 1330 and 1330SPECIAL kits Suction cup ref. GEZ-543-1 Designed to provide...
Reference: NSE-827
Delivered without castors
Reference: NET-VENT
Rubber Cleaner is specially designed to clean and restore the appearance of all your rubber components such as seals, rubberized hubcaps, suction cups and similar surfaces. It effectively removes dirt and residues and restores the shine of rubber, prolonging its durability and appearance. Caution: This product is not recommended for certain plastics or...
Reference: MICRO-CARBON
Optimize your cleaning with our carbon fiber microfiber, designed for a flawless result on windows without leaving streaks or residue. Thanks to advanced carbon fiber technology, this ultra-soft microfiber effectively captures dust, dirt and fingerprints, while eliminating traces of water and cleaning products. Washable and reusable, it guarantees...
Reference: GEZ-150-1
Vacuum lifterØ 150 mm REPAREGLASSThese vacuum lifter have been specially designed for windsheild setting and removal.Their unique shape allows a good hand holding. The flowing shape and the smooth surface of the handles allow a greater control of large windows.To install a windshield, we ercommend beginning by doing a test. The setting of the windsheild...
Reference: VP-230-N319
In good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Heavy-Duty Piston Suction Cup Ø 230 mm – Lifting Capacity up to 380 kg Looking for a reliable suction cup for heavy glass handling? Our Ø 230 mm piston suction cup is engineered for professionals who demand maximum lifting power,...
Reference: VP-230SPECIALE-N330
In very good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Ø 230 mm Piston Suction Cup – For Heavy Loads and Curved Glass Surfaces Designed for handling very heavy loads up to 350 kg, this professional Ø 230 mm suction cup is ideal for working with highly curved glass, such as bus...
Reference: VP-230-N326
In very good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Heavy-Duty Piston Suction Cup Ø 230 mm – Lifting Capacity up to 380 kg Looking for a reliable suction cup for heavy glass handling? Our Ø 230 mm piston suction cup is engineered for professionals who demand maximum lifting...
Reference: VP-230-N324
In good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Heavy-Duty Piston Suction Cup Ø 230 mm – Lifting Capacity up to 380 kg Looking for a reliable suction cup for heavy glass handling? Our Ø 230 mm piston suction cup is engineered for professionals who demand maximum lifting power,...
Reference: VP-230SPECIALE-N334
Average condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Ø 230 mm Piston Suction Cup – For Heavy Loads and Curved Glass Surfaces Designed for handling very heavy loads up to 350 kg, this professional Ø 230 mm suction cup is ideal for working with highly curved glass, such as bus...
Reference: VP-205-N348
Suction cup in average condition - Please note, sold individually Cosmetic defects shown in the photos are present - Only one item available 2nd LIFE warranty: 6 months SOLD INDIVIDUALLY – DELIVERED IN A CARRYING CASE This piston suction cup, with a 205 mm diameter, is specifically designed for heavy-duty lifting and handling. Its piston mechanism creates...
Reference: 252
A high-performance lubricant to protect and maintain your moving parts. Key features: Thixotropic formula: Ideal for parts subjected to high pressure, shock and oscillation. Provides long-lasting lubrication even under extreme conditions. Excellent adhesion: Stays in place on all surfaces, even during continuous movement. Water- and corrosion-repellent:...
Reference: PSL-150-1
Suction cup deluxe sold individualy (Ø 150 mm)Easier and safer to attach that common suction lifters with clamp lever technology.The bell shaped rubber pads already adhere onto the glass surface with slight pressing even before pressing the lever.Possibility to pass a belt through. Load capacity for each lifter is 80 kg.
Reference: VP-230-N320
In very good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Heavy-Duty Piston Suction Cup Ø 230 mm – Lifting Capacity up to 380 kg Looking for a reliable suction cup for heavy glass handling? Our Ø 230 mm piston suction cup is engineered for professionals who demand maximum lifting...
Reference: VP-205-N351
Suction cup in good condition - Please note: sold individually Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months SOLD INDIVIDUALLY – DELIVERED IN A CARRYING CASE This piston suction cup, with a 205 mm diameter, is specifically designed for heavy-duty lifting and handling. Its piston mechanism...
Reference: VP-230SPECIALE-N333
In very good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Ø 230 mm Piston Suction Cup – For Heavy Loads and Curved Glass Surfaces Designed for handling very heavy loads up to 350 kg, this professional Ø 230 mm suction cup is ideal for working with highly curved glass, such as bus...
Reference: VP-230SPECIALE-N328
In good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Ø 230 mm Piston Suction Cup – For Heavy Loads and Curved Glass Surfaces Designed for handling very heavy loads up to 350 kg, this professional Ø 230 mm suction cup is ideal for working with highly curved glass, such as bus...
Reference: FRE-080-P-N153
In average condition Cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months To prevent the corners of hubcaps from sticking out, they are often attached with adhesive tape. However, this method carries risks: adhesives can react chemically with the vehicle's paintwork, causing damage. The ideal solution?...
Reference: VP-230-N323
Average condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Heavy-Duty Piston Suction Cup Ø 230 mm – Lifting Capacity up to 380 kg Looking for a reliable suction cup for heavy glass handling? Our Ø 230 mm piston suction cup is engineered for professionals who demand maximum lifting power,...
Reference: PSH-125-DESTOCK
Only 65 units in stock Pair of suction cups. The suction cups allow you to lift a flat glass pane ready for installation safely. Simply place the suction cups on the glass and press the levers down to create a vacuum. The glass pane can now be transported safely. Please note that these suction cups have been developed for a load capacity of: 40 kg...
Reference: RTD-499
Pair of ratcheting tie downsRatcheting tie downs are used by glaziers to secure freshly bonded-in glasses.Use these ratcheting tie downs together with our suction cups so as to hold vertical-glazed glasses in place while the urethane cures. The ratcheting tie downs are simply passed through the handles of the vacuum cups and tight-ened.- 165 x 165 x 10 mm...
Reference: GEZ-543-1-N342
Suction cup in good condition - Please note: sold individually Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months This piston suction cup is specially designed for installing and removing automotive glass. Its ergonomic handle ensures a secure and comfortable grip, even when handling large glass...
Reference: VP-230-N325
In good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Heavy-Duty Piston Suction Cup Ø 230 mm – Lifting Capacity up to 380 kg Looking for a reliable suction cup for heavy glass handling? Our Ø 230 mm piston suction cup is engineered for professionals who demand maximum lifting power,...
Reference: VP-230-N315
In good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Heavy-Duty Piston Suction Cup Ø 230 mm – Lifting Capacity up to 380 kg Looking for a reliable suction cup for heavy glass handling? Our Ø 230 mm piston suction cup is engineered for professionals who demand maximum lifting power,...
Reference: VSP-290-N174-175
In good condition - Orange color Only a few minor cosmetic defects - 1 Only one item available 2nd LIFE warranty: 6 months This pair of suction cups makes it much easier to handle side windows by holding them firmly in the desired position. This leaves both hands free to work safely and accurately. Simply pass the tool's cable over the door, then attach...
Reference: VP-230SPECIALE
Ø 230 mm Piston Suction Cup – For Heavy Loads and Curved Glass Surfaces Designed for handling very heavy loads up to 350 kg, this professional Ø 230 mm suction cup is ideal for working with highly curved glass, such as bus windshields. Its built-in manual piston efficiently creates a vacuum, ensuring strong adhesion even on complex or curved surfaces. The...
Reference: JP135-N263
Suction cup in very good condition Only cosmetic defects shown in the photos are present - 1 Only one available 2nd LIFE warranty: 6 months Automatic vacuum suction cup - Load capacity 45kg - Diameter 175mm
Reference: VP-230SPECIALE-N337
In good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Ø 230 mm Piston Suction Cup – For Heavy Loads and Curved Glass Surfaces Designed for handling very heavy loads up to 350 kg, this professional Ø 230 mm suction cup is ideal for working with highly curved glass, such as bus...
Reference: VP-230SPECIALE-N332
In good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Ø 230 mm Piston Suction Cup – For Heavy Loads and Curved Glass Surfaces Designed for handling very heavy loads up to 350 kg, this professional Ø 230 mm suction cup is ideal for working with highly curved glass, such as bus...
Reference: FRE-080-P-N168
In average condition Cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months To prevent the corners of hubcaps from sticking out, they are often attached with adhesive tape. However, this method carries risks: adhesives can react chemically with the vehicle's paintwork, causing damage. The ideal solution?...
Reference: DESTOCK-FRE-080-P
To prevent the corners of hubcaps from sticking out, they are often attached with adhesive tape. However, this method carries risks: adhesives can react chemically with the vehicle's paintwork, causing damage. The ideal solution? Our retaining tool, specially designed to secure hubcaps without compromising paint quality. Advantages : Optimum protection:...
Reference: VP-205-N350
Suction cup in good condition - Please note: sold individually Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months SOLD INDIVIDUALLY – DELIVERED IN A CARRYING CASE This piston suction cup, with a 205 mm diameter, is specifically designed for heavy-duty lifting and handling. Its piston mechanism...
Reference: VP-205-N349
Suction cup in average condition - Please note, sold individually Cosmetic defects shown in the photos are present - Only one item available 2nd LIFE warranty: 6 months SOLD INDIVIDUALLY – DELIVERED IN A CARRYING CASE This piston suction cup, with a 205 mm diameter, is specifically designed for heavy-duty lifting and handling. Its piston mechanism creates...
Suction cup in good condition - Please note: sold individually
Only cosmetic defects shown in the photos are present - 1 Only one item available
2nd LIFE warranty: 6 months
This piston suction cup is specially designed for installing and removing automotive glass. Its ergonomic handle ensures a secure and comfortable grip, even when handling large glass surfaces.
It uses a piston system to efficiently create a vacuum, providing strong adhesion to the glass.
Lifting capacity: 62 kg
Diameter: 150 mm
Weight: 0.700 kg
Type: Manual piston suction cup
For optimal use:
Recommended dry run: First, perform a dry test fitting to place reference marks that will help ensure correct positioning of the glass.
Suction cup placement: Position two suction cups as far apart as possible while maintaining full control over the glass.
Creating the vacuum: Tighten the piston until the red line (indicator ring) appears to ensure maximum suction.
Installation and removal of automotive windshields and windows
Handling of large flat glass surfaces
Ideal for auto glass workshops, body shops, and vehicle repair professionals
