Tuyau de connection pompe à dépression 2.50M pour kit TERMINATOR 1 et 2

Reference: 10357

Rechargeable battery-powered 7.2V carbide drill for impact drilling

Rechargeable 7.2V carbide drill delivered with battery and charger, for drilling the impact point on your Windshield before injection of the resin. Use with our 934, 4509w and 701 drills. This drill can also be used with a felt pad (ref.971) to polish the impact after repair.

Reference: 994

Brand: REPARBRISE

Injector for windshield repair resin for KIT-1320 - TERMINATOR 1 AND 2

Injector nozzle for applying windscreen repair resin using a vacuum/pressure pump. 1. Injection performance and precision Efficient resin injection: This nozzle is specially designed for applying repair resin to windscreen impacts using a vacuum/pressure pump. This technology allows for precise and even injection, guaranteeing a high-quality repair....

Reference: 977

Brand: REPARBRISE

Large format UV screen 30 x 20 cm - windshield impact protection

Large-format 30 x 20 cm UV screen to protect against ultra-violet light during repairs.

Reference: 539

Round UV screen Ø 9cm for deck 9620 - Impact protection

Round UV screen protects the point of impact from UV light when injecting windscreen windshield repair resin. For use with kit 1320 and KIT TERMINATOR 1 AND 2 For use with 9620 bridge Ø 9cm

Reference: 931

Brand: REPARBRISE

Single 135 mm UV neon for 1046 and UVB-150 lamp

Single U.V. neon 135 mm - 931- for 1046 and UVB-150 lamp 

Reference: DPG

Vacuum pump calibration tester for windshield repair

It's imperative to test the calibration of your vacuum pump at minimum once a year, to ensure quality repairs for your customers. French Standard regulation NF R61-980... Frequency of use: once a year. This new regulation allows to ensure that the pressure and vaccum cycles made from the pump are correct ( Pressure tolerance is 0,1 Bar) in order to avoid...

Reference: HOS-2010

Rubber Seals (x2) for HOS-2000, HOS-2000-L, HOS-1000-T vacuum pump hoses

Set of 2 replacement rubber seals for HOS-2000, HOS-2000-L and HOS-1000-T hose It is important to change the rubber seals frequently to ensure that the windshield repair resin is injected correctly. The rubber seal is situated inside the connector on your hose. If there is a leak in the hose, you can change the seal by using a wrench and unscrewing the...

Reference: FIX-5035

Brand: REPAREGLASS

Plastic screw for FIX-2001 injection bridge

Plastic screw for injection bridge FIX-2001 allows the bridge to be adjusted to create a uniform sealing.

Reference: ADAPT-PBV

Adapter for vertical or reverse glazing

ADAPTER FOR VERTICAL OR INVERTED GLAZING Truck, bus, tractor, public works, combine harvester type.... The adaptor enables repairs to be carried out on vertical windscreens with a negative tilt of up to 20°. For use with injector 994, our 9620 bridge for TERMINATOR 1 and 2 cases, and 1320. Not compatible with FIX-2001, 2000, 367 and 51 bridges, cannot be...

Reference: RS-2030

Pack of 5 special resin injection syringes for windshield repairs

Resin dispenser pack consisting of 5 syringes and 3 needles. The RS-2030 syringe lets you remove the injection resin from the bottle or pipette and inject it into the injector. You can also use the syringe to fill drill holes and cracks in your windscreen.

Reference: 499

Cigar-lighter multi-socket box

Cigar-lighter power strip. Allows you to recharge appliances such as UV lamps, drills, hoovers, etc. Ideal for buses and trucks.

Reference: 946

Brand: REPARBRISE

Large impact windshield pit adapter

Warning: sold without seal, seal reference in stock 983 Adapter for repairing large impacts, it adapts to our 3200 and 994 injectors to enable you to repair large impacts on the windshield. It can be used with our 1320, 951 and TERMINATOR 1 and 2 kits.

Reference: HOS-2000

1M connector hose for 1110 pump and PMP-ADVANTAGE

Connection hose for vacuum pump 1110 and PMP-ADVANTAGE and injector 5095 or 5096 for windshield repair. Length: 1M

Reference: 818

Windshield heater for impact repair

The WINDSHIELD HEATER warms the repair area, usb powered, supplied with adapter + 5 thermometers Ref. 961 12v cigarette lighter and 220v mains, 2.5m cable, ideal for impact repairs, red or black depending on availability.

Reference: 1110

Brand: REPAR'VIT

Pressure vacuum pump for REPAR'VIT 1330 kit

The pressure vacuum pump 1110 is used to assist the repair of the impact on your windshield, by creating an air vacuum. This helps to remove air and impurities from the impact before injecting the resin. Alternating pressure vacuum/pressure with your pump will inject the resin uniformly into the impact.

Reference: HOS-2000-L

2.50M long connector hose for Bus and Truck for 1110 and PMP-ADVANTAGE pumps

Long connection hose for bus and truck, vans, trams, etc... compatible with 1110 and PMP-ADVANTAGE vacuum pumps, our 5095 and 5096 injectors. Used in our 1330 and 1330SPECIAL kits, not compatible with our 1320 and TERMINATOR 1 and 2 kits. Length : 2.50M

Reference: FIX-2044

Brand: REPAR'VIT

Metal resin injector for FIX-2001 injection bridge

Metal injector for windshield repair resin injection for FIX -2001 injection bridge

Reference: 993

Brand: REPARBRISE

Pressure vacuum pump for REPAR'VIT Senior 1320 kit

Vacuum pump delivered with hose ref.996 (quick connector on injector side and direct connection on pump) The pressure vacuum pump is used to assist the repair of the impact on your windshield, by creating an air vacuum. This helps to remove air and impurities from the impact before injecting the resin. Alternating pressure vacuum/pressure with your pump...

Reference: 985

Vaccum plug for suction of impact impurities

Vaccum plug to remove impurities from the windshield impact. Diameter 3cm The Vaccum plug is used with the vacuum pump ref.993.

Reference: 5095

Brand: REPARBRISE

Standard injector 5095 for kit 1330 and 1330SPECIAL

Standard injector for kit ref.1330 and kit ref.1330SPECIAL. Supplied with seal, not compatible with our old 1310 kit.

Reference: LUNETTE1048

UV protection glasses

When repairing windscreens, it is essential to wear UV protection goggles, especially when using UV LED lamps, such as our UV lamp 1048. These goggles provide optimal protection against ultraviolet rays, thus reducing the risks to the eyes and guaranteeing maximum safety. Characteristics: - Anti-UV filtration: Effective protection against UV exposure -...

Reference: 996

Brand: REPARBRISE

1M hydraulic connection hose for 993 pump

Connection hose with quick-fit connector (female on 1 side only) suitable only for 993 vacuum pump and 994 injector. Length: 1M

Reference: 770

Window / windshield cleaner 20L - Mosquito repellent -770

Effectively remove traces of oil, insects and dust with the foam-based 770 glass/windscreen cleaner. Ideal for use in industry, the automotive sector and construction, this product ensures impeccable cleanliness of glass surfaces. Characteristics: Powerful action: Dissolves traces of oil, insects and dirt in an instant Multi-purpose: Suitable for...

Reference: 994JOINT

Brand: REPAREGLASS

Seal for 994CLAP plunger for 994 injector

Valve seal 994CLAP for injector 994 1. Effective solution for repairing leaks Quick repair of leaks: This 994CLAP valve seal is designed to solve leak problems on the upper end of the 994 injector. By replacing this small black seal, you can eliminate leaks and ensure optimal operation of your injector. Increased reliability: By replacing the worn...

Reference: PMP-ADVANTAGE

Brand: REPAR'VIT

Pressure vacuum pump for REPAR'VIT kit 1330SPECIAL and 1300

The pressure vacuum pump is used to assist the repair of the impact on your windshield, by creating an air vacuum. This helps to remove air and impurities from the impact before injecting the resin. Alternating pressure vacuum/pressure with your pump will inject the resin uniformly into the impact.

Reference: 617

Cylinder vacuum nozzle

Cylinder vacuum nozzle. Removes air trapped in the impact. Supplied with specific hose without connection and a smaller diameter. (for use with the 3200 cylinder and 993 vacuum pump).

Reference: 272

Crack spreader bar for windshield repairs

Crack spreader bar for windshield repairs. This tensioning bar helps to stabilise the crack during your repair.

Reference: FLEXI-BLADE

Flexible silicone wiper blade for windows and bodywork

Flexible wiper blade made in silicone. Allow to ease the removal of the water from surface to be dried. Appliable on the glass and metal.

Reference: 645

Brand: REPARBRISE

12V carbide drill for impact drilling

12V carbide drill supplied with integrated chuck lock, for drilling the impact point on your windshield before injecting the resin. Use with our 934, 4509w and 701 carbide drills. This drill can also be used with a felt for polishing the impact after repair. 4M cable extension

Reference: 961

Brand: REPARBRISE

Thermometer strip for windshield - 8 to 34°C

Thermometer strip To define the temperature of the windshield before operate. Scale 8°-34°C