Vaccum plug for suction of impact impurities

Reference: TER-CHARGEUR

Brand: TERMINATOR

Charger for TERMINATOR 1 AND 2 and ULTRAPOSE EVOLUTION kits

Charger for TERMINATOR 1 AND 2 and ULTRAPOSE EVOLUTION kits. Connect the charger to your TERMINATOR or ULTRAPOSE EVOLUTION to recharge the battery.

Reference: 5BX-2016

Ø 0.9 cm Rubber seals for standard impact injector 5095 and FIX-2006

Ø 0.9 cm rubber seals for large impact injector 5095 and FIX-2006. It is important to change the seals regularly to ensure a good seal when injecting windshield repair resin. 1 bag of 5 pieces

Reference: FLEXI-BLADE

Flexible silicone wiper blade for windows and bodywork

Flexible wiper blade made in silicone. Allow to ease the removal of the water from surface to be dried. Appliable on the glass and metal.

Reference: 979

Brand: REPARBRISE

Special windshield repair light pen

Our 979 pen light provides a better view of the impact injection during the repair of your windshield.

Reference: 994

Brand: REPARBRISE

Injector for windshield repair resin for KIT-1320 - TERMINATOR 1 AND 2

Injector allowing you to inject windshield repair resin using a pressure vacuum pump. Used in KIT-1320 - TERMINATOR 1 AND 2, fits perfectly with our vertical or reversed windshield adaptor ref. ADAPT-PBV. It is suggested that you also order the injector to avoid leaks due to wear of the seal: - To replace the seal in contact with the windshield, use ref....

Reference: 5BX-02010

Rubber seals Ø 1.5 cm for large impact injector 5096 and FIX-2005

Ø 1.5 cm seals for large impact injector 5096 and FIX-2005. It is important to change the seals regularly to ensure a good seal when injecting windshield repair resin. 1 bag of 5 pieces

Reference: 1110

Brand: REPAR'VIT

Pressure vacuum pump for REPAR'VIT 1330 kit

The pressure vacuum pump 1110 is used to assist the repair of the impact on your windshield, by creating an air vacuum. This helps to remove air and impurities from the impact before injecting the resin. Alternating pressure vacuum/pressure with your pump will inject the resin uniformly into the impact.

Reference: 538

Large format U.V. screen 30 x 40 cm - Protects windshield impact

Large-format 30 x 40 cm UV screen to protect against ultra-violet light during repairs. Used by the bus and truck industry.

Reference: HOS-1000-T

2.50M vacuum pump connector hose for TERMINATOR 1 and 2 kits

Vacuum pump connector hose for TERMINATOR 1 and 2 kits - Ideal for repairing impacts on the Windshields of utility vehicles, trucks, buses, trams, etc....  Length: 2.50 M

Reference: 645

Brand: REPARBRISE

12V carbide drill for impact drilling

12V carbide drill supplied with integrated chuck lock, for drilling the impact point on your windshield before injecting the resin. Use with our 934, 4509w and 701 carbide drills. This drill can also be used with a felt for polishing the impact after repair. 4M cable extension

Reference: 10357

Rechargeable battery-powered 7.2V carbide drill for impact drilling

Rechargeable 7.2V carbide drill delivered with battery and charger, for drilling the impact point on your Windshield before injection of the resin. Use with our 934, 4509w and 701 drills. This drill can also be used with a felt pad (ref.971) to polish the impact after repair.

Reference: 617

Cylinder vacuum nozzle

Cylinder vacuum nozzle. Removes air trapped in the impact. Supplied with specific hose without connection and a smaller diameter. (for use with the 3200 cylinder and 993 vacuum pump).

Reference: FIX-5063-DESTOCK

Brand: REPAR'VIT

Aluminium screw for injection bridge 367

Aluminium screw for injection bridge 367, holds injectors 5095 and 5096 to the windshield to ensure a seal during resin injection.

Reference: FIX-5035

Brand: REPAREGLASS

Plastic screw for FIX-2001 injection bridge

Plastic screw for injection bridge FIX-2001 allows the bridge to be adjusted to create a uniform sealing.

Reference: 512

Miniature 220V/12V cigarette lighter voltage transformers

Miniature 220V/12V cigarette-lighter voltage transformers, for recharging equipment with a cigarette-lighter connector. Ex. UV lamp, drill, etc.

Reference: HOS-2010

Rubber Seals (x2) for HOS-2000, HOS-2000-L, HOS-1000-T vacuum pump hoses

Set of 2 replacement rubber seals for HOS-2000, HOS-2000-L and HOS-1000-T hose It is important to change the rubber seals frequently to ensure that the windshield repair resin is injected correctly. The rubber seal is situated inside the connector on your hose. If there is a leak in the hose, you can change the seal by using a wrench and unscrewing the...

Reference: ISHP-BIG

Joints pour adaptateur pare-brise ADAPT-PBV - Lot de 10

Reference: ADAPT-PBV

Adapter for vertical or reverse glazing

ADAPTER FOR VERTICAL OR INVERTED GLAZING Truck, bus, tractor, public works, combine harvester type.... The adaptor enables repairs to be carried out on vertical windscreens with a negative tilt of up to 20°. For use with injector 994, our 9620 bridge for TERMINATOR 1 and 2 cases, and 1320. Not compatible with FIX-2001, 2000, 367 and 51 bridges, cannot be...

Reference: DPG

Vacuum pump calibration tester for windshield repair

It's imperative to test the calibration of your vacuum pump at minimum once a year, to ensure quality repairs for your customers. French Standard regulation NF R61-980... Frequency of use: once a year. This new regulation allows to ensure that the pressure and vaccum cycles made from the pump are correct ( Pressure tolerance is 0,1 Bar) in order to avoid...

Reference: 994JOINT

Brand: REPAREGLASS

Seal for 994CLAP plunger for 994 injector

If you have problems with leaks on the top nozzle of the 994 injector, you will need to change the small black seal inside the 994CLAP plunger. Seal for 994CLAP plunger for 994 injector

Reference: 499

Cigar-lighter multi-socket box

Cigar-lighter power strip. Allows you to recharge appliances such as UV lamps, drills, hoovers, etc. Ideal for buses and trucks.

Reference: 959

Brand: REPARBRISE

Carbide-tip pen for windschield impact

Carbide-tipped pen, used to remove surface impurities on the impact before repairing it.

Reference: 226

Ballbreaker for your own training.

Ballbreaker for your own training. This tool is specially designed to create an impact on a test windscreen, when you want to train new colleagues or as part of windscreen repair training.

Reference: PMP-ADVANTAGE

Brand: REPAR'VIT

Pressure vacuum pump for REPAR'VIT kit 1330SPECIAL and 1300

The pressure vacuum pump is used to assist the repair of the impact on your windshield, by creating an air vacuum. This helps to remove air and impurities from the impact before injecting the resin. Alternating pressure vacuum/pressure with your pump will inject the resin uniformly into the impact.

Reference: 3200

Brand: REPARBRISE

REPARBRISE Injector: Cylinder + piston for injection of windshield repair resin

REPAIR injector composed of a high quality cylinder + piston. Composed of 5 lips which allow an additional depression and a faster repair. Adapts to our injection bridges ref.51 and 9620. To avoid any leaks due to seal wear, we recommend that you also order the interchangeable end caps ref 3202 when purchasing the injector.

Reference: 983

Brand: REPARBRISE

Seals (X2) for large impact adapter 946

Seals (X2) for large impact adapter 946. It is important to change the seals regularly to ensure a good seal when injecting the Windshield Repair Resin.

Reference: 5096

Brand: REPARBRISE

Large impact packer 5096 for 1330 and 1330SPECIAL kits

Large impact injector for kit ref.1330 and kit ref.1330SPECIAL. Supplied with seal, not compatible with our old 1310 kit.

Reference: 818

Windshield heater for impact repair

The WINDSHIELD HEATER warms the repair area, usb powered, supplied with adapter + 5 thermometers Ref. 961 12v cigarette lighter and 220v mains, 2.5m cable, ideal for impact repairs, red or black depending on availability.

Reference: 974

Special syringe for injecting resin to repair windshields

The syringe ref.974 will allow you to take the injection resin from inside the bottle or pipette and then inject it into the injector. You can also use the syringe to fill drill holes and cracks in your Windshield.

Reference: LP10

Magnifying glass (15x zoom) for visual impact on windscreen

Plastic magnifying glass (15x zoom) with transparent base. Excellent tool for identifying the type of impact, but also for viewing the impurities contained within it.