KIT TERMINATOR 2 için ön cam çoklu onarım kiti

Reference: 1110

Brand: REPAR'VIT

Pressure vacuum pump for REPAR'VIT 1330 kit

The pressure vacuum pump 1110 is used to assist the repair of the impact on your windshield, by creating an air vacuum. This helps to remove air and impurities from the impact before injecting the resin. Alternating pressure vacuum/pressure with your pump will inject the resin uniformly into the impact.

Reference: ADAPT-PBV

Adapter for vertical or reverse glazing

ADAPTER FOR VERTICAL OR INVERTED GLAZING Truck, bus, tractor, public works, combine harvester type.... The adaptor enables repairs to be carried out on vertical windscreens with a negative tilt of up to 20°. For use with injector 994, our 9620 bridge for TERMINATOR 1 and 2 cases, and 1320. Not compatible with FIX-2001, 2000, 367 and 51 bridges, cannot be...

Reference: 948

Special windshield repair scraper blades - Pack of 5

These scraping blades are specially designed to remove excess finishing resin after a windshield repair. They allow for precise, scratch-free scraping, guaranteeing a smooth, clean surface. Versatile, they are also ideal for restoration work on plastic, vinyl and leather, facilitating the removal of excess repair products. Features and benefits: -...

Reference: FIX-5019

Brand: REPAREGLASS

Vacuum for Single bridge ref. 366 - 2000 and GEZ-543-1

Reference: 5BX-2016

Ø 0.9 cm Rubber seals for standard impact injector 5095 and FIX-2006

Ø 0.9 cm rubber seals for large impact injector 5095 and FIX-2006. It is important to change the seals regularly to ensure a good seal when injecting windshield repair resin. 1 bag of 5 pieces

Reference: FIX-2005

Brand: REPAR'VIT

Large impact resin filler injector for REF -2000 bridge

Large impact resin filler injector for REF-2000 Ø 1.5 cm bridge.

Reference: 994JOINT

Brand: REPAREGLASS

Seal for 994CLAP plunger for 994 injector

If you have problems with leaks on the top nozzle of the 994 injector, you will need to change the small black seal inside the 994CLAP plunger. Seal for 994CLAP plunger for 994 injector

Reference: 818-12V

12V cigar lighter charger

12V cigar lighter charger compatible with charging cable 1048-CABLEUSB. Works with our UV-1048 lamp, our 818 windshield heater, our LAMPE-3 and our LAMPE-F headlamp.

Reference: 1700

Brand: REPAREGLASS

REPAREGLASS® Senior 1700 Tool box

REPAREGLASS® is used and approved by a large number of car manufacturers. Discover our glazing repair kit, complete with all the tools and accessories you need to carry out quality repairs to your windscreen. Ideal for professionals.

Reference: 926

Brand: REPARBRISE

Roll of special plastic film for repairing cracks and fissures

Roll of soft plastic film for crack repair. Our flexible plastic film is specially designed for surface curing of crack repair resin. Lay the film over the crack resin and then use a UV lamp to polymerise the crack repair on the windshield. Warning: not compatible with finishing resin.

Reference: LR919

Brand: REPAREGLASS

Standard injection resin LR919

Discover our LR919 injection resin for repairing windshield impacts, a solution for restoring the transparency and strength of your car windows. (5 to 8 repairs). 1ML

Reference: KIT-TERMINATOR-MAXI

Brand: TERMINATOR

TERMINATOR: AUTOMATIC WINDSHIELD REPAIR SYSTEM

VOTED EQUIPMENT OF THE YEAR 2017: Read the article VBSA REVOLUTIONISES WINDSHIELD REPAIR  The TERMINATOR motorised windscreen repair kit is an injection process with a motor. It is so intuitive that even someone who doesn't repair windscreens on a daily basis is able to carry out perfect repairs. The operator no longer has to stand in front of the impact...

Reference: FIX-2001

Brand: REPAR'VIT

REPAR'VIT® FIX-2001 injection bridge for windshield repair

Our REPAR'VIT® FIX-2001 injection bridge is a support for injecting windshield repair resin. It is used with our FIX-2044 injector + FIX-5035 screw, which are included in the bridge, and our vacuum/pressure pump ref.PMP-ADVANTAGE (not included). You'll find our FIX-2001 bridge in our 1300 windshield repair kit.

Reference: 983

Brand: REPARBRISE

Seals (X2) for large impact adapter 946

Seals (X2) for large impact adapter 946. It is important to change the seals regularly to ensure a good seal when injecting the Windshield Repair Resin.

Reference: PACK-RESINES

Pack of special REPARBRISE consumables for impact repairs

WINDSHIELD REPAIR CONSUMABLES PACK REPARBRISE 15 to 20 REPAIRS! Our special windshield repair consumables pack includes a range of essential consumables for easy windshield repairs: - 3 x REF-921N REPARBRISE Resins (AFNOR & UTAC regulation no. 43 conform)  - 1 x REF-3200 Injector  - 1 x REF-943 Finishing resin - 1 x REF-948 pack of 5 Scraper blades  -...

Reference: 977

Brand: REPARBRISE

Large format UV screen 30 x 20 cm - windshield impact protection

Large-format 30 x 20 cm UV screen to protect against ultra-violet light during repairs.

Reference: HOS-2001

Nylon cleaning brush for HOS-2000 hose

Nylon cleaning brush for HOS-2000 connection hose, for cleaning excess windshield repair resin.

Reference: 1046

Brand: REPARBRISE

UV LAMP - 12V - Special Resin Curing

12V UV lamp with timer To connect this lamp to the 230V mains, simply adapt our mini transformer Ref.512. Please note: the maximum amperage of the replacement fuses is 2A. It is important to replace the UV neon (ref.931) at a frequency defined in accordance with standard NF R61-980, i.e: Continuous operation for 15 hours or approximately 90 repairs....

Reference: 539

Round UV screen Ø 9cm for deck 9620 - Impact protection

Round UV screen protects the point of impact from UV light when injecting windscreen windshield repair resin. For use with kit 1320 and KIT TERMINATOR 1 AND 2 For use with 9620 bridge Ø 9cm

Reference: PORTE-CT

Adhesive sticker holder for car inspections - pack of 100

Adhesive sticker holder for neutral technical inspection Our sticker holders are completely self-adhesive over their entire surface. Pack of 100 sticker holders (75 x 75mm)

Reference: 4510NEW

Brand: REPARBRISE

220V long UV lamp for crack resin curing

Our 220V long UV lamp is a practical tool for curing crack resin to repair cracks in your windshield. (less than 5 minutes) It's highly portable, with sufficient power to ensure the resin cures quickly and effectively. Lightweight and ergonomic, it makes it easy to dry the 634 crack resin.

Reference: 524

Brand: REPARBRISE

24V/12V voltage transformers for buses and trucks

24V/12V voltage transformers for buses and trucks

Reference: 770

Window / windshield cleaner 20L - Mosquito repellent -770

Effectively remove traces of oil, insects and dust with the foam-based 770 glass/windscreen cleaner. Ideal for use in industry, the automotive sector and construction, this product ensures impeccable cleanliness of glass surfaces. Characteristics: Powerful action: Dissolves traces of oil, insects and dirt in an instant Multi-purpose: Suitable for...

Reference: RS-2030

Pack of 5 special resin injection syringes for windshield repairs

Resin dispenser pack consisting of 5 syringes and 3 needles. The RS-2030 syringe lets you remove the injection resin from the bottle or pipette and inject it into the injector. You can also use the syringe to fill drill holes and cracks in your windscreen.

Reference: FIX-2044

Brand: REPAR'VIT

Metal resin injector for FIX-2001 injection bridge

Metal injector for windshield repair resin injection for FIX -2001 injection bridge

Reference: 51

Brand: REPAREGLASS

51 REPAREGLASS® injection bridge for windshield repairs

Our 51 REPAREGLASS® injection bridge is a support for injecting windshield repair resin and is used with our 3200 injector.

Reference: 1300

Brand: REPAR'VIT

1300 REPAR'VIT JUNIOR windshield repair kit

REPAR'VIT® is used for various types of impact repairs: Bubble impacts Impacts with star-shaped bubbles Spangled impacts cracks Discover our glass repair case, complete with all the tools and accessories you need to carry out quality repairs to your windscreen. Ideal for professionals.

Reference: GAB-VBSA

Brand: REPARBRISE

Field of vision model to define windshield repair areas

REPAIR ZONE : Zone 2 : In this zone, repair is not authorised. Zone 1 : Where possible, repairs are authorised.. Using our field of vision template, you can easily determine the zones where repairs are possible or impossible. Refer to the AFNOR NF R19-601-1 standard, which sets out the different types of repair and the support processes required to...

Reference: 5BX-02010

Rubber seals Ø 1.5 cm for large impact injector 5096 and FIX-2005

Ø 1.5 cm seals for large impact injector 5096 and FIX-2005. It is important to change the seals regularly to ensure a good seal when injecting windshield repair resin. 1 bag of 5 pieces

Reference: HOS-2002

Cleaning brush for injector 5069 or 5062

Nylon cleaning brush for injector 5069 or 5062 to clean excess injection resin from the windscreen