RAPTOR için kanca

Reference: MRC1105-R4 - N420

Ratchet for ROLL-N-CUT kit - N420

Not available

Reference: Z9

Cold knife blade coated, extra fine 38 mm

Cold knife blade coated, extra fine - Sold individually- Cutting length: 38 mm- 20gCARTON OF 10

Reference: MRC1105-R4 - N421

Ratchet for ROLL-N-CUT kit - N421

Not available

Reference: AST-120

Telescopic magnet

Telescopic magnetWhen you work above all in the door or chassis frame of the vehicle, a screw may fall and it may be impossible to pick it up with your fingers. With this telescopic magnet, you no longer have this problem. The telescopic device is extendable from 12 (corresponding to the size of a ballpoint pen ) to 60 cm. The strong magnet is capable to...

Reference: FB121

Cutting blade, straight - 26mm

Cutting blade, straightCutting length: 26 mmSold individually

Reference: DST-734

T-handle wire threader with hole

REF-DST-734 T-handle wire threader with hole Just lay the wire in the notched tip and pass it through the polyurethane by pushing the tool from the inside to the outside.In the way, you can release the window. Always place the flat surface of the wire threader on the window, so that the hollow tube is not deformed.120 x 26 x 10 mm • 20 g

Reference: LH-683

Christmas tree moulding remover

Reference: L2

Olfa® knife

Olfa®knife This knife is made of high impact plastic, has a stainless steel blade housing and a positive locking thumb wheel so that you can set the blade at any length. The back of the knife features a rubber grip that lets the knife rest comfortably in your hand and keeps it from slipping. The famous model. - 146 x 40 x 20 mm - 110 g

Reference: CTD-607

Recessed Cowling Clip Remover

Recessed Cowling Clip RemoverSome self-locking cowling clips are recessed down into the cowling. They are not the type that look like a Phillips or TORX®screw, but are the type that can be removed with a tool like the CGE-148. The only problem is the TPE657 will not reach downinto the recessed area and go under the head of the clip. If you manage to force...

Reference: WK24ZS

Serrated Offset, BTB blade, 150mm

Serrated Offset, BTB blade, 150mm

Reference: LAME-DECOUPE-NINJA

Cold cutting blade: Equalizer Ninja

Specially designed for the Equalizer® Ninja pneumatic knife, these cold cutting blades offer optimal precision and remarkable efficiency, suitable for use on all types of windshields. Their design absorbs vibrations while ensuring a clean and fast cut, even in the most difficult-to-reach areas.

Reference: WFA-450

Windshield wiper arm removal tool Universal

REF. WFA-450Universal Wiper Puller. Sometimes you need alarge thick puller arm to remove a windshield wiperand sometimes you need a small thin arm. This is thereason our wiper puller has interchangable arms. Setthe wiper puller arms on the horozontal slide, slidethem in until they touch the side of the windshieldwiper, snug the wing nut to hold them in...

Reference: SC316

Scraper blades for ref. FSC-300SPECIAL scrapers

16 mm scraper blades for ref. FSC-300SPECIAL- Package of 10 blades- 63 x 21 x 18 mm - 30 g

Reference: FB176

Cutting blade, straight - 40mm

Cutting blade, straightCutting length: 40 mmSold individually

Reference: LB10S

Rigid segmented blades for L2 and XL2 knives

Optimize your cuts with these segmented rigid blades, specially designed for use with L2 and XL2 cutters. Applications: Perfect for meticulous bodywork and mechanical work. Ideal for cutting plastics, rubber, fabrics and other materials used in the automotive industry.

Reference: MRC1105-R4 - N422

copy of Ratchet for ROLL-N-CUT kit - N421

Not available

Reference: LBB-10

"Black" segmented rigid blades

Rigid blades "BLACK" segmented pack of 10 pieces for L2 and XL2

Reference: CS-RC-N405

Empty Toolbox with 4 Drawers and a Removable Tray (without Wheels) – Second Life – N405

In very good condition Only a few minor cosmetic defects – Only one unit available Second Life Warranty: 6 months Empty toolbox with 4 lockable drawers and a removable top tray. Central handle + 2 side handles for easy transport. Optional: Set of 4 wheels (2 with brake and 2 without) to facilitate mobility of the toolbox. Dimensions: L: 62 × W: 30 × H: 32...

Reference: FB079

Hook blade 36 mm

cutting length : 36mm 17g Sold individually

Reference: DLH-511

Double-end moulding release tool

Double-end moulding release tool This heavy-duty tool is made of steel so it will not bend. It has a small rubber spacer through each end to the tool up off the glass about 1 mm. This is important for two reasons. First, it prevents the tool from scratching the glass. Secondly, it holds the end above the glass so there is less chance the tip will catch...

Reference: WK1S

Serrated, long, flat BTB blade, 300mm

Serrated, long, flat BTB blade, 300mm

Reference: ZAW-010

Wiper puller for bolted-on wipers

Wiper puller for bolted-on wipersBecause windshield wipers have become larger, wiper arms are pressure-fitted to the posts so they will not slip. They are then secured with a nut to hold the arm in place so they will not lift. Until now, it was almost impossible to remove these wiper arms without breaking or damaging them or scratching the cowl. You no...

Reference: WK3S

Serrated, multi-purpose, bent BTB blade, 200mm

Serrated, multi-purpose, bent BTB blade, 200mm

Reference: VKD-44A

Brand: REPAREGLASS

SQUARED CUTTING WIRE in a spool- Size: 0.6mm - 44 ML

SQUARED CUTTING WIRE in a spool REPAREGLASS Surprising but true! The cutting resistance of the squared wire is far higher than the one of the common round wire. Try it, you will see!Squared wire - 0,6 x 0,6 mm,- length: 44m, on plastic spool.- 100 x 22 mm - 110 g

Reference: KIT-BTB

BTB kit (automatic PB cutting)

The BTB Kit is a complete, high-performance pneumatic solution for cutting windshields quickly and efficiently, whether from inside or outside the vehicle. Designed to minimize physical effort, its ultra-lightweight knife (1.1 kg) ensures easy and comfortable handling, even during long jobs. Very quiet and compliant with European Directive 2002/44/EC on...

Reference: PAIG-200

Wire gripping handles (corkscrew shape)

Wire gripping handlesIdeal solution to work rapidly and without problem. Feed the wire through the hole in the wedge shaft (fig A), loop it through the hole at the top of the shaft (fig B) and then bring it back into the large plastic handle. By pressing the wedge back into the handle, the wire is held in place (fig C). To shorten the wire, press down on...

Reference: TQ-1438

Angular scraper blades (x10) 16mm-53°

Angular scraper blades (x 10) 16 mm - 53° • Package 10 pcs The angular scraper blades facilitate the scraping of old urethane from the corners of the pinchweld.

Reference: SYSTEME-PROTECTION-DE-BAIE

Metal strip: Windshield bay protection

Effectively protecting the windshield bay during cutting has long been a challenge for technicians. Traditional methods, such as inserting a protective shield between the glass and the bay, are often ineffective against the repeated vibrations and impacts of electric or pneumatic tools. These tools can displace or damage the protective shield, exposing...

Reference: AEB405-N192

Pneumatic knife: Equalizer® EXCALIBUR® DELUXE - 2nd LIFE - N192

Kit in good condition. The case may be incomplete (blades). Only cosmetic defects shown in the photos are present. Only one item available. 2nd LIFE warranty: 6 months Recommended for cutting the lower parts of the windscreen, rear windows and quarter windows. Cutting the interior of the vehicle. Compact and lighter, it is even easier to handle,...

Reference: XKD-44A

Square piano wire for windshield cutting - 0.7 x 0.7 mm - 44ML

Discover our new REF-XKD-44 square piano wire, designed to offer exceptional strength and meet the most demanding needs. Applications: Used for precise cutting of windscreens and automotive glazing, this rope is a must-have for bodybuilders and garages. Its sturdy, square design ensures a firm grip and greater efficiency when removing glass and similar...