REPAREGLASS® junior Cam tamir alet kutusu

Reference: FIX-2025

Brand: REPAR'VIT

Replacement plunger piston for injection bridge and suction cup

Replacement piston for our bridges REF-2000, REF-367, REF-9620, and our suction cup REF-GEZ-543-1.

Reference: 1414-V2

Brand: REPARBRISE

Old windshield impact cleaning kit

Reference: GAB-VBSA

Brand: REPARBRISE

Field of vision model to define windshield repair areas

REPAIR ZONE : Zone 2 : In this zone, repair is not authorised. Zone 1 : Where possible, repairs are authorised.. Using our field of vision template, you can easily determine the zones where repairs are possible or impossible. Refer to the AFNOR NF R19-601-1 standard, which sets out the different types of repair and the support processes required to...

Reference: SOUS-MAIN

VBSA glazing repair and tool kit

Sous - main glass repair and equipment tool range VBSA with product referencesAllows you to have the most frequently used references close at handOnly available in French

Reference: 951

Brand: REPARBRISE

REPARBRISE® SENIOR WINDSHIELD REPAIR Tool box

REPARBRISE® is used and approved by a large number of car manufacturers. Discover our glazing repair kit, complete with all the tools and accessories you need to carry out quality repairs to your windscreen. Ideal for professionals.

Reference: 996

Brand: REPARBRISE

1M hydraulic connection hose for 993 pump

Connection hose with quick-fit connector (female on 1 side only) suitable only for 993 vacuum pump and 994 injector. Length: 1M

Reference: 1330

Brand: REPAR'VIT

REPAR'VIT® WINDSHIELD REPAIR Tool box with a pressure/vaccum pump

REPAR'VIT® is used for various types of impact repairs: Bubble impacts Impacts with star-shaped bubbles Spangled impacts cracks Discover our glass repair case, complete with all the tools and accessories you need to carry out quality repairs to your windscreen. Ideal for professionals.

Reference: HOS-2000

1M connector hose for 1110 pump and PMP-ADVANTAGE

Connection hose for vacuum pump 1110 and PMP-ADVANTAGE and injector 5095 or 5096 for windshield repair. Length: 1M

Reference: 1046

Brand: REPARBRISE

UV LAMP - 12V - Special Resin Curing

12V UV lamp with timer To connect this lamp to the 230V mains, simply adapt our mini transformer Ref.512. Please note: the maximum amperage of the replacement fuses is 2A. It is important to replace the UV neon (ref.931) at a frequency defined in accordance with standard NF R61-980, i.e: Continuous operation for 15 hours or approximately 90 repairs....

Reference: FIX-5019

Brand: REPAREGLASS

Vacuum for Single bridge ref. 366 - 2000 and GEZ-543-1

Reference: 969

Long probe for impact repair

Large probe, for perfect centring of the repair and easier resin injection.

Reference: POSTER-RPB

Manual windshield impact repair process poster - 50x70cm

Windshield repair posterPlease do not hesitate to ask for some poster when you proceed to ordering Available for export only with a product order. No delivery possible on its own

Reference: 161

Brand: REPAREGLASS

Cigar lighter extension cable for battery

Extension cable for batteries. To put on the cigar lighter.

Reference: 9620

Brand: REPARBRISE

9620 REPARBRISE® aluminium injection bridge for windshield repairs

Our 9620 REPARBRISE® injection bridge is a support for injecting windshield repair resin. It can be used with a 3200 manual injector, but also with the 994 vacuum/pressure injector. You'll find our 9620 bridge in our 1320, TERMINATOR and TERMINATOR2 windshield repair kits.

Reference: 701

Brand: REPARBRISE

Drill ball 701 for drilling large windshield impacts

Our 701 large ball drill is specially designed for windshield repairs, for drilling through very large impacts. Sold individually

Reference: KIT-FENTES-RPB

Specific repair kit for cracks

Specific repair kit for windshield cracks. This kit contains everything you need to effectively repair cracks in your windscreen and avoid having to replace it.

Reference: 974

Special syringe for injecting resin to repair windshields

The syringe ref.974 will allow you to take the injection resin from inside the bottle or pipette and then inject it into the injector. You can also use the syringe to fill drill holes and cracks in your Windshield.

Reference: POSTER-1320

Windshield impact repair process poster - 1320 - 50x70cm

Windshield impact repair process poster - 1320 - 50x70cm Please do not hesitate to ask for some poster when you proceed to ordering Available for export only with a product order. No delivery possible on its own

Reference: HOS-2001

Nylon cleaning brush for HOS-2000 hose

Nylon cleaning brush for HOS-2000 connection hose, for cleaning excess windshield repair resin.

Reference: 3202

Brand: REPARBRISE

Exchangeable nozzles for REPARBRISE 3200 injector (pack of 5)

Exchangeable nozzles for REPARBRISE 3200 injector (pack of 5). When you repair a windshield impact, it's important that the injector has uniform sealing when the resin is injected. It is now essential to change the nozzle of the 3200 injector as soon as it becomes damaged.

Reference: LUNETTE1048

UV protection glasses

UV protection glasses It is absolutely essential to wear protective glasses during windshield repairs when using our LED UV lamps, for example our UV lamp 1048.

Reference: 1110

Brand: REPAR'VIT

Pressure vacuum pump for REPAR'VIT 1330 kit

The pressure vacuum pump 1110 is used to assist the repair of the impact on your windshield, by creating an air vacuum. This helps to remove air and impurities from the impact before injecting the resin. Alternating pressure vacuum/pressure with your pump will inject the resin uniformly into the impact.

Reference: DPG

Vacuum pump calibration tester for windshield repair

It's imperative to test the calibration of your vacuum pump at minimum once a year, to ensure quality repairs for your customers. French Standard regulation NF R61-980... Frequency of use: once a year. This new regulation allows to ensure that the pressure and vaccum cycles made from the pump are correct ( Pressure tolerance is 0,1 Bar) in order to avoid...

Reference: 634

Special resin for windshield cracks

Our 634 resin is specially designed to repair cracks in windshields quickly and effectively.

Reference: 10357

Rechargeable battery-powered 7.2V carbide drill for impact drilling

Rechargeable 7.2V carbide drill delivered with battery and charger, for drilling the impact point on your Windshield before injection of the resin. Use with our 934, 4509w and 701 drills. This drill can also be used with a felt pad (ref.971) to polish the impact after repair.

Reference: 539

Round UV screen Ø 9cm for deck 9620 - Impact protection

Round UV screen protects the point of impact from UV light when injecting windscreen windshield repair resin. For use with kit 1320 and KIT TERMINATOR 1 AND 2 For use with 9620 bridge Ø 9cm

Reference: 948

Brand: REPARBRISE

Special windshield repair scraper blades - Pack of 5

Our scraper blades will allow you to remove excess resin from the surface after your windshield repair. Pack of 5 blades

Reference: TER-CHARGEUR

Brand: TERMINATOR

Charger for TERMINATOR 1 AND 2 and ULTRAPOSE EVOLUTION kits

Charger for TERMINATOR 1 AND 2 and ULTRAPOSE EVOLUTION kits. Connect the charger to your TERMINATOR or ULTRAPOSE EVOLUTION to recharge the battery.

Reference: PORTE-VIGNETTE

Windshield sticker holder to be customised with your company logo

Vignette holder to personalise with your company logo. To do so, complete the fields below. Production time approx. 10 days. It's possible to go up to 3 fields of personalisation. (Please note that the font is small). It's quite possible to integrate only your logo. Your logo must be attached in HD 300DPI. Available in packs of 120 or 500, printed on 1 or...

Reference: HOS-2002

Cleaning brush for injector 5069 or 5062

Nylon cleaning brush for injector 5069 or 5062 to clean excess injection resin from the windscreen