Cold knife blade

Reference: FBS129

Scraper blade set

Jeu de 2 lames à racler. l'une large de 12 mm, l'autre de 25 mm

Reference: DSS-175

One-man wire cut-out tool

One-man wire cut-out toolREPAREGLASSOne-man wire cut-out toolThis tool acts like another person sitting inside the vehicle pulling the wire back after you havemade your cutting stroke.Attached to the swivel is a spring that acts as a second person; you pull the wire out to make your cut and the springs pulls the wire back in. The spring is attached to a...

Reference: CCR-819

EQUALIZER® cowling clip removal tool

EQUALIZER® cowling clip removal tool If expension-type cowling worked the way they were designed, you would simply unscrew the plastic screw and the clip would come out. Unfortunately, they seldom work correctly. Our cowling clip removal tool has a small sharp screw that screws into the plastic head and pulls the screw out. The clip will then collapse and...

Reference: WFA-450SPECIAL

Universal Wiper Puller

REF-WFA-450SPECIALSimilar to WFA-450 butendowed with double arm

Reference: FSL240

Pinchweld scraper with interchangeable blade

Pinchweld scraper with interchangeable bladeThis may be the last pinchweld scraper you will ever buy! From now on.You may just buy blades. When the blade finally wears out, remove the two screws, pull out the old blade, drop in a new blade and tighten the two screws. These pinchweld scrapers are made of spring steel and are hard enough so they will not...

Reference: ENK148

Pneumatic knife: EQUALIZER ® Ninja deluxe

The Equalizer® Ninja Deluxe kit is the essential tool for glass professionals for fast, precise and efficient cold cutting. Suitable for all types of vehicles, this pneumatic knife combines power, ergonomics and maneuverability, with up to 22,000 oscillations per minute for effortless work, even in the most complex areas. Key features: Exceptional...

Reference: CAISSE-N399

Storage case L: 44 cm x H: 17 cm x W: 19 cm - 2nd LIFE - N399

In very good condition Only a few minor cosmetic flaws - 9 units available 2nd LIFE warranty: 6 months Storage case Length: 44cm - Width: 17cm - Height: 19cm

Reference: 3307

Handle: EQUALIZER® Ninja pneumatic knives

The EQUALIZER® Ninja pneumatic knife handle is a replacement part designed specifically to restore or improve the grip of your tool. Robust and ergonomic, it allows you to maintain optimal control of the knife during cold cutting, even in the most complex areas. Features: Exclusive compatibility: designed exclusively for the EQUALIZER® Ninja model...

Reference: FSC1.7B2

FEIN battery-powered knife - without blade, with battery

Discover a powerful, precise and completely autonomous solution for your automotive work. This FEIN cordless knife is designed to meet the highest demands of glass professionals, combining mobility, performance and reliability. Technical specifications: Battery voltage: 18 V Battery capacity: 5 Ah Oscillations: 10,000 - 19,500 rpm Amplitude: 2 x 1.7°...

Reference: CS-RC

TOOL-BOX WITHOUT ROLLING

Reference: DST-58

Curved wire threader 58 mm (package at 3 pièces)

Curved wire threader:The curved wire threader anables threading of the cutting wire evenwhere the gap between glass and pinch weld is very small.This is especially helpful on side and back windows where conventionalwire threaders are often difficult to use.The curved threader can be pushed through the adhesive bead from insideto outside or from outside to...

Reference: RCH-163

Flexible pull handle with neoprene coating

The REPAREGLASS flexible pull handle with neoprene coating is designed for comfortable and safe use during cold cutting. It has the same features as the classic ZDK-395 handle, with the added advantage of a neoprene coating that improves grip while protecting painted surfaces on the vehicle. Perfect for use with ZDK-395 cold cutting knives, this flexible...

Reference: Z1

Cold knife blade 19 mm

Cold knife blade- Sold individually- Cutting length: 19 mm- 18gCARTON OF 10

Reference: L2

Olfa® knife

Olfa®knife This knife is made of high impact plastic, has a stainless steel blade housing and a positive locking thumb wheel so that you can set the blade at any length. The back of the knife features a rubber grip that lets the knife rest comfortably in your hand and keeps it from slipping. The famous model. - 146 x 40 x 20 mm - 110 g

Reference: CAISSE-N397

Storage case L: 44 cm x H: 17 cm x W: 19 cm - 2nd LIFE - N397

In very good condition Only a few minor cosmetic flaws - 1 Only one item available 2nd LIFE warranty: 6 months Storage case Length: 44cm - Width: 17cm - Height: 19cm

Reference: Z9RV

New Paint Protection Reverse Bend Blade 38mm « ULTRAWIZ »

Nylon coating protects exposed paint from accidental blade contactIdeal for exposed glass with underside molding or encapsulationOffers the control a technician needs to cut awayfrom the glass or moldingAvailable in 3 lengths : 19 mm – 25 mm – 38 mm

Reference: ZDK-500

Knife with quick blade exchange device

The knife with quick blade change is the ideal tool for professionals who want to save time and work efficiently. Thanks to its quick change system, simply press the button at the base of the knife, remove the worn blade, and insert a new blade while maintaining pressure. Simple, fast, and safe. Compatible with all blades for cold cutting knives, it...

Reference: JPB391

Plastic razor blades

Plastic razor bladesThese plastic razor blades are suitable to remove stickers andlabels from glass surfaces.As the blade is made of plastic it cannot scratch the glass contraryto a metal blade that could.Box of 100 blades

Reference: LB10

Rigid not segmented blades for l2 and xl2 knives

Rigid not segmented blades, for L2 and XL2 knives Package of 10 pieces - 110 x 18 x 0.5 mm - 65 g

Reference: WP738-E

EQUALIZER® pinchweld scraper

Used to remove urethane and butyl from the pinchweld. The tool has a hardened steel blade of 24 mm wide that can be sharpened dozens of times. - 200 x 29 x 29 mm - 120 g

Reference: FB097-DESTOCK

FEIN curved blade 125mm - Z-curve with fixed stop

FEIN curved blade - Z curve, with fixed depth stop Total length: 125 mm - Length of cutting edge: 58mm Unit

Reference: VKD-44A

Brand: REPAREGLASS

SQUARED CUTTING WIRE in a spool- Size: 0.6mm - 44 ML

SQUARED CUTTING WIRE in a spool REPAREGLASS Surprising but true! The cutting resistance of the squared wire is far higher than the one of the common round wire. Try it, you will see!Squared wire - 0,6 x 0,6 mm,- length: 44m, on plastic spool.- 100 x 22 mm - 110 g

Reference: LH-683-N144

Lever for hubcaps - 2nd life

In average condition Only a few minor cosmetic defects appear - 1 Only one item available 2nd LIFE warranty: 6 months Removing hubcaps without the right tool can quickly damage these delicate parts. If a flat screwdriver is sometimes used, its small contact surface often causes damage and does not provide sufficient leverage. The hubcap lever solves these...

Reference: ZK35

ZipKnife™ Cold Knife

The ZIPKNIFE cold knife is specially designed to provide optimal control when cutting windshields. Its unique shape keeps the cutting head firmly in place while ensuring great freedom of movement. Thanks to its ergonomic design, it allows effective force to be applied in both directions, making cutting easier even in hard-to-reach areas. This knife is...

Reference: LH-683-N113

Lever for hubcaps - 2nd life

In good condition Only a few minor cosmetic defects appear - 1 Only one item available 2nd LIFE warranty: 6 months Removing hubcaps without the right tool can quickly damage these delicate parts. If a flat screwdriver is sometimes used, its small contact surface often causes damage and does not provide sufficient leverage. The hubcap lever solves these...

Reference: SGR-380

Glass scraper, with 1 RK-100A blade

Glass scraper with 1 RK-100A bladeMainly used to rapidly and entirely remove bond residues on windows that will be reinstalled. Also used to remove stickers. Simply replace the old blade by a new one, no sharpening needed.

Reference: LH-683-N55

Lever for hubcaps - 2nd life

In average condition Only a few minor cosmetic defects appear - 1 Only one item available 2nd LIFE warranty: 6 months Removing hubcaps without the right tool can quickly damage these delicate parts. If a flat screwdriver is sometimes used, its small contact surface often causes damage and does not provide sufficient leverage. The hubcap lever solves these...

Reference: AEB405-N192

Pneumatic knife: Equalizer® EXCALIBUR® DELUXE - 2nd LIFE - N192

Kit in good condition. The case may be incomplete (blades). Only cosmetic defects shown in the photos are present. Only one item available. 2nd LIFE warranty: 6 months Recommended for cutting the lower parts of the windscreen, rear windows and quarter windows. Cutting the interior of the vehicle. Compact and lighter, it is even easier to handle,...

Reference: LT-415-1

5 adaptable eylets

5 replacement eylets

Reference: DESTOCK-WK7L

Double manual handle for BTB blades

Double handle for BTB blade - Makes it easy to cut windshield and other glazing seals. Dimensions: 190 x 38 x 38 mm