FEIN akülü bıçak için 18V - 5A akü

Reference: NSE-KITDEV

Set of 4 wooden reels

Reference: DPO-585

Rivet Stem Remover

Rivet Stem Remover It is often necessary to remove dor glasses without breaking them. Drilling out the rivet so you can remove the door glass is easy if you can remove the rivet stem. Rivet stems are made of steel and are impossible to drill out. Our rivet stem remover has contoured end so it will sit over the rivet and align perfectly with the rivet...

Reference: VP-205-N353

Piston Suction Cup – Diameter 205 mm – Lifting Capacity 260 kg - Second Life - N353

Suction cup in very good condition - Please note: sold individually Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months SOLD INDIVIDUALLY – DELIVERED IN A CARRYING CASE This piston suction cup, with a 205 mm diameter, is specifically designed for heavy-duty lifting and handling. Its piston...

Reference: AIG-789

Straight wire threader

Many technicians remove windshields by starting the wire through the top and bottom center of the windshield, then cutting towards each side. So as to push the cutting wire into the urethane, especially where there is a wide surface of urethane, we recommend using the wire threader. The slot (1,2 mm only) and the cutting wire are pushed together into the...

Reference: WFA-450SPECIAL

Universal Wiper Puller

REF-WFA-450SPECIALSimilar to WFA-450 butendowed with double arm

Reference: V54-N525

VBSA 14.4V Cordless Gun - Second-hand - N525

General condition: No issues, Good condition Only the cosmetic defects shown in the photos are present - Only one unit available 2nde VIE Warranty: 6 months Designed for extruding standard 310 ml cartridges and 400 ml cartridges, it ensures smooth, controlled and effortless application. Main features: Compatible with 310 ml cartridges and 400 ml...

Reference: WK2S

Serrated, average, universal, flat BTB blade, 240mm

Serrated, average, universal, flat BTB blade, 240mm

Reference: PWR-5063

Chargeur de batterie Milwaukee - 12 V et 18 V

This 18V charger is specially designed to efficiently recharge the batteries of your Milwaukee and PowerPush guns. Compatibility: 12V battery: PWR-5012 (2Ah), PWR-5013 (4Ah) 18V battery: PWR-5018 (2Ah), PWR-5021 (5Ah) Ensure maximum autonomy for your tools with this robust and high-performance charger.

Reference: JU101

Universal mouldings • 9.5 mm x 22,8 m

Universal mouldingsExcellent forming and adhesion. Remain flexible even withlow temperatures. Butyl adhesive- No cracking, no weakness, no distorsion REF-JU101• 9.5 mm x 22,8 mFor T4 PLEASE ASK OUR KEYCHAIN SAMPLE WHICH WILL ALLOWS TO DISCOVEROUR UNIVERSAL MOULDING RANGE..Supplied with a detail list with many exemple of cars that cover.)

Reference: VB4000722

Canopy sheet metal staples

Sold in packs of 10

Reference: L110

Reel on wheels for electrostatic film - Marouflage paper, etc...

Simplify storage and use of your protective rolls with this reel on wheels. Key features: Versatile: This dispenser is designed to support a variety of rolls, such as electrostatic film, marouflage paper and other consumables, with rolls up to 1175 mm long. Adjustable, sliding “T” rod: Allows the roll to be locked at the desired height, offering...

Reference: FB083-DESTOCK

Hook blade with U shape - 10mm

Please note: Only 5 units in stock REF-FB-083 Hook blade with U shapeCutting length: 10 mmSold individually

Reference: KIT-BTB

BTB kit (automatic PB cutting)

The BTB Kit is a complete, high-performance pneumatic solution for cutting windshields quickly and efficiently, whether from inside or outside the vehicle. Designed to minimize physical effort, its ultra-lightweight knife (1.1 kg) ensures easy and comfortable handling, even during long jobs. Very quiet and compliant with European Directive 2002/44/EC on...

Reference: DLH-511

Double-end moulding release tool

Double-end moulding release tool This heavy-duty tool is made of steel so it will not bend. It has a small rubber spacer through each end to the tool up off the glass about 1 mm. This is important for two reasons. First, it prevents the tool from scratching the glass. Secondly, it holds the end above the glass so there is less chance the tip will catch...

Reference: PAIG-200

Wire gripping handles (corkscrew shape)

Wire gripping handlesIdeal solution to work rapidly and without problem. Feed the wire through the hole in the wedge shaft (fig A), loop it through the hole at the top of the shaft (fig B) and then bring it back into the large plastic handle. By pressing the wedge back into the handle, the wire is held in place (fig C). To shorten the wire, press down on...

Reference: VB4000714

Canopy sheet metal staples

Sold in packs of 10

Reference: VB4000707

Canopy sheet metal staples

Sold in packs of 10

Reference: 8PZ010607-971-DESTOCKAGE

CSC TOOL Target - KIA / HYUNDAI 1-05 - Clearance Sale

Reference: 8PZ010624-081

Cible CSC TOOL MOBILE - TOYOTA LEXUS 1-08

Reference: CAISSE-N396

Storage case L: 44 cm x H: 17 cm x W: 19 cm - 2nd LIFE - N396

In very good condition Only a few minor cosmetic flaws - 1 Only one item available 2nd LIFE warranty: 6 months Storage case Length: 44cm - Width: 17cm - Height: 19cm

Reference: BOB-1.5-ROLL-OUT

Spool of 1.5km for roll-out 2000

Spool  of 1.5km - Round wire: 0.8 mm

Reference: APB-TS3500

Brand: L'ULTRAPOSE

This option allows to place the windshield in horizontal side

Reference: EHL-652

Lightly powdered latex gloves

These latex gloves, lightly powdered, offer excellent protection and hygiene while guaranteeing good dexterity. Ideal for handling delicate surfaces, they allow you to touch the edge of the glass without risk of contamination. Characteristics: Material: Natural latex, lightly powdered for easy donning Single use, non-sterile Comfort and flexibility:...

Reference: ZAW-010-N441

Tool for removing windshield wipers - Second Life - N441

In good condition Only the cosmetic defects shown in the photos are present - Only 1 item available 2nde VIE Warranty: 6 months Wiper puller for bolted-on wipersBecause windshield wipers have become larger, wiper arms are pressure-fitted to the posts so they will not slip. They are then secured with a nut to hold the arm in place so they will not lift....

Reference: KPM-5055

Camera sensor adhesive pads for MERCEDES ACTROS - Set of 5

Version : MERCEDES ACTROS Quantité : 5 pièces

Reference: BOB-1.5-ROLL-OUT

Round wire in a spool REPAREGLASS - ø 0,80 mm, 1500 ml

Round wire in a spool The round profile and the small diameter make this wire a real problem solver for todays cars with narrow gaps between glass and body. It has the same high tensile strength than the VKD-44but offers at the same time as much lower risk to damage interior linings and dashboards.679 Newtonø 0,80 mm, 1500 ml

Reference: TS2016

GLASS SETTING/LIFTING TOOL FOR BUS AND TRUCKS

ULTRA-POSE BUS IS ADAPTED FOR THE REMOVAL AND INSTALLATION OF VERY LARGE WINDOWS BY A SINGLE OPERATOR (trucks, subways, buses, panoramic roofs...) ADVANTAGES Gearing system can be operated manually or with a screwdriver Wheel lock for straight forward and backward movement Foldable for easy transport and storage 1 person only to load and unload it from a...

Reference: PSD6

Bay cleaning blades (scraper not included) - 6 mm

The 6 mm diameter windshield cleaning blades are designed to effectively remove excess adhesive from the windshield seal, particularly in curved areas and hard-to-reach edges. Their specific shape allows for precise cleaning while reducing the risk of damage to the paintwork, unlike standard scraping blades. Also available in 12 mm rectangular (REF-PS-12)...

Reference: FSB102

Saw disk ø 63 mm

disque de scie ø 63 mm vendu à l'unité

Reference: WK5S

SERRATED LONG FLAT BLADE 130MM

Serrated long, flat blade 130mm