VBSA awarded ECOVADIS label
Banner
This 18V charger is specially designed to efficiently recharge the batteries of your Milwaukee and PowerPush guns.
Compatibility:
Ensure maximum autonomy for your tools with this robust and high-performance charger.
Choose power and autonomy with our 18V Lithium batteries. Exceptional performance:
|
18V Lithium battery - 2 Ah and 5 Ah
€0.00 |
|
Designed to meet the highest demands, the RED LITHIUM 12V battery guarantees exceptional autonomy and constant power, even in the most demanding environments. Thanks to its advanced lithium-ion technology, it delivers optimal performance in all weather conditions, including extreme cold down to -18°C. Its robust design ensures excellent water and dust resistance for reliable operation on all your job sites. Available in two capacities:
|
12V Lithium battery - 2 Ah and 4 Ah
€0.00 |
Reference: SB-880
When working with glass, wearing protective eyewear is essential to ensure eye safety against shards and debris. Our shatterproof glasses offer side and front protection thanks to their ergonomic design. They can be worn over most prescription glasses, ensuring optimal comfort for all users. Features: - Complete protection: Protects the eyes against...
Reference: 501FC-310
FOR VOUR SAFETY Our windshield bondings have been tested and validated by TUV (crash tes!) + OEM (used by manufac!urers as original equipment). Standard FMVSS208/212. Products on the market for over 20 years. FAST-drying, one-component polyurethane bonding agent that reacts with humidity in the air to form a strong and elastic seal. The adhesive is...
Reference: F1K
PRIMERLESS windshield bonding. FAST PRIMERLESS application is different from the traditional application, it consists of using our F1 activating cleaner followed by the "F1K" polyurethane bonding agent compared to the traditional application composed of 3 products (degreaser, primer and bonding). VEHICLE CURING TIME Curing time (23°-50%) Airbag: 1 hour -...
Reference: PWR-2017
18V Lithium Milwaukee cordless guns -Ejection pressure : 4500Nm -+ 20 % Speed -Upgrade performance up to 40 % compared to old version -Excellent for high viscosity PU -Red-Lithium Ion technology Réf: PWR-2017: Gun for cartridges 310 ml and saussages 400 ml
Reference: PWR-2019
18V Lithium Milwaukee cordless guns -Ejection pressure : 4500Nm -+ 20 % Speed -Upgrade performance up to 40 % compared to old version -Excellent for high viscosity PU -Red-Lithium Ion technology REF-PWR-2019: Gun for saussages 400 ml + 600 ml, and cartridges 310 ml
Reference: 1040-037
Optimize the use of your POWERPUSH battery-operated spray gun with this specially designed 310 ml cartridge holder. Made of a robust and durable material, it holds the 310 ml cartridge firmly during application, ensuring precise and even distribution of the product. This holder is an essential accessory for ensuring practical and efficient use of your...
Reference: 5510-1-1-004
Optimize the ergonomics of your POWERPUSH battery-powered glue gun with this sturdy and durable rack and pinion handle. Designed to offer maximum comfort of use, it guarantees easy and safe handling when gluing and sealing. Ideal for replacing a worn or damaged handle, it helps maintain the optimal performance of your POWERPUSH glue gun.
Reference: PASTILLE-ROUGE
Red plastic washer specially designed to adapt Milwaukee 12V gun for use with 400 ml and 600 ml cartridges. It ensures perfect compatibility and optimal hold of the cartridge in the gun, guaranteeing smooth and controlled extrusion of the product.
Reference: 5027-600-18V-EU
Powerpush 18V battery-powered gun The PowerPush gun is designed to deliver unrivalled power and optimum efficiency, guaranteeing smooth and effortless application of PU in all situations. Powerclutch transmission: improves extrusion recovery speed for faster and more consistent application. Variable AutoReverse function: reduces unexpected stops and...
Reference: ETABLI-183
Workshop workbench with steel top (without grid, without wood top and without accessories) Discover our workshop workbench with drawers and steel top, ideal for safely storing your DIY tools and accessories. Drawer colors may vary according to availability. Product specifications:- Dim. L: 183cm - W :73cm - H:89cm OPTION n°1: REF-GRILLE-180- Perforated...
Reference: GUN-DEV
Adopt our sturdy metal stand, specially designed to store your glue gun in a safe and practical way on your workbench. Made of durable steel, this stand ensures maximum stability by keeping your glue gun in a horizontal position, reducing the risk of burns and clutter. Thanks to its compact and functional design, it fits perfectly on any workbench,...
Reference: BIGKIT501FC-400
FOR VOUR SAFETY Our windshield bondings have been tested and validated by TUV (crash tes!) + OEM (used by manufac!urers as original equipment). Standard FMVSS208/212. Products on the market for over 20 years. SAVETY DRIVE-AWAY TIME 501FC-HM-LC-HV: Curing time (23°-50%) Airbags: 30 minutes If you regularly change windshield bonding, choose our BIG KIT for...
Reference: PWR-2016-112
Circular washer specially designed for fitting cartridges to MILWAUKEE 12V guns. It guarantees optimum cartridge retention in the cylinder, ensuring stable, even extrusion. An essential accessory for precise, efficient use of your Milwaukee gun.
Reference: BLACKNIT
Give your hands optimum protection with our powder-free black nitrile gloves, designed for professional, all-purpose use. Recommendations for use : Store in a cool, dry place, away from excessive heat (maximum temperature: 40°C). Open tin to be protected from UV rays and direct exposure to sunlight. Packaging: Sold in boxes of 100 pieces, ideal for...
Reference: Cremaillere-powerpush
Optimize the use of your PowerPush battery-powered gun with our specially designed rack to ensure even and effortless extrusion. Made of a robust and durable material, this rack ensures optimal support for your cartridges and carton packs for precise and efficient work. Compatible with the PowerPush 5027-400-18V-EU and 5027-600-18V-EU gun, it is the...
Reference: 5027-400-18V-EU
POWERPUSH CORDLESS GUNS Battery caulking gun into the US market for more than 15 years. Variable speed power on the trigger Variable speed power on the variator ADVANTAGES : Possibiliy to vary the speed power with the trigger or with the variator. Fast and effectiveness extrusion after trigger release. Set 2 in 1 with both application cartridges 310 ml...
Reference: BATTERIE-18V
Choose power and autonomy with our 18V Lithium batteries. Exceptional performance: Milwaukee batteries allow you to work in extreme conditions, in hot or very cold weather, down to -18°C. Electronics protected against water and dust infiltration, guaranteeing optimal longevity. Up to 2.5 times more autonomy, 20% more power and a twofold lifespan.
Reference: PWR-2016-112
Circular washer specially designed for fitting cartridges to MILWAUKEE 12V guns. It guarantees optimum cartridge retention in the cylinder, ensuring stable, even extrusion. An essential accessory for precise, efficient use of your Milwaukee gun.
Reference: KIT-NETGUN
This complete kit is designed to effectively clean adhesive residue from inside your gun tube, ensuring optimal performance and extended life for your equipment. Kit contents: Cleaning tube – REF. NETGUN-TUBE 10 lint-free cloths (dimensions: 45 x 45 cm unfolded) – REF. NETGUN-TISSU Special adhesive cleaner – REF. NETGUN-CLEAN
Reference: PASTILLE-NOIRE
Black plastic washer specially designed to adapt the Milwaukee 18V gun for use with 400 ml and 600 ml cartridges. It ensures perfect compatibility and optimal hold of the cartridge in the gun, guaranteeing smooth and controlled extrusion of the product.
Reference: PWR-5074-NEW
Replacement rack handle specially designed for MILWAUKEE 18V extruder guns. It ensures a comfortable grip, optimal control during extrusion, and smooth pressure transmission. Ideal for replacing a damaged or worn part and extending the life of your tool.
Reference: PWR-2016-111
Circular washer designed to adapt cartridges to Milwaukee 18V guns. Positioned behind the BLACK PACKET, it ensures optimal cartridge retention and perfect compatibility with the equipment. Essential for reliable and secure mounting.
Reference: PASTILLE-ROUGE
Red plastic washer specially designed to adapt Milwaukee 12V gun for use with 400 ml and 600 ml cartridges. It ensures perfect compatibility and optimal hold of the cartridge in the gun, guaranteeing smooth and controlled extrusion of the product.
Reference: TUBE-MILWAUKEE
Replacement tubes compatible with Milwaukee 12V and 18V battery guns. Available in 310-400 ml and 600 ml versions, they allow you to use cartridges or cans according to your needs. Ideal for bonding or sealing applications, these tubes guarantee smooth, even distribution. Robust and reliable for intensive professional use.
Reference: PWR-2019
18V Lithium Milwaukee cordless guns -Ejection pressure : 4500Nm -+ 20 % Speed -Upgrade performance up to 40 % compared to old version -Excellent for high viscosity PU -Red-Lithium Ion technology REF-PWR-2019: Gun for saussages 400 ml + 600 ml, and cartridges 310 ml
Reference: PCG12-400
Designed for demanding professionals, this MILWAUKEE gun works with 310 ml cartridges and 400 ml pods. It offers up to 1780 Nm of thrust, ensuring efficient extrusion, even with the thickest adhesives or at low temperatures. Includes: 12V Li-Ion 2.0 Ah battery Charger Carrying case
Reference: PWR-5064AC
This MILWAUKEE cigarette lighter charger is the ideal solution for mobile professionals, particularly in the windshield repair and bonding or car cleaning sectors. Compact and practical, it allows you to recharge your batteries directly from your vehicle's cigarette lighter socket, for total autonomy even when on the move. Compatible with: 12 V...
Reference: CREMAILLERE-MILWAUKEE
Replacement rack compatible with Milwaukee 18V battery-powered guns. Available in 310-400 ml and 600 ml versions, they allow the use of cartridges or pods according to your needs.
Reference: PWR-5064
Designed for demanding professionals, this MILWAUKEE charger allows you to quickly and efficiently recharge your 12 V batteries. Thanks to its sequential charging technology, each cell is recharged individually for optimized charging time and extended battery life. Compatible with the following MILWAUKEE batteries: PWR-5012 (12V – 2.0 Ah) PWR-5013 (12V...
Reference: PWR-5076
Plastic washer for holding nozzles, compatible with MILWAUKEE extruder guns. Ensures reliable, stable nozzle attachment during extrusion, preventing loosening during application.
Reference: PWR-2017
18V Lithium Milwaukee cordless guns -Ejection pressure : 4500Nm -+ 20 % Speed -Upgrade performance up to 40 % compared to old version -Excellent for high viscosity PU -Red-Lithium Ion technology Réf: PWR-2017: Gun for cartridges 310 ml and saussages 400 ml
Reference: BATTERIE-18V
Choose power and autonomy with our 18V Lithium batteries. Exceptional performance: Milwaukee batteries allow you to work in extreme conditions, in hot or very cold weather, down to -18°C. Electronics protected against water and dust infiltration, guaranteeing optimal longevity. Up to 2.5 times more autonomy, 20% more power and a twofold lifespan.
This 18V charger is specially designed to efficiently recharge the batteries of your Milwaukee and PowerPush guns.
Compatibility:
Ensure maximum autonomy for your tools with this robust and high-performance charger.
