Reference: 969
Long probe for impact repair
Large probe, for perfect centring of the repair and easier resin injection.
Filter By
Categories
Categories
Packaging
Packaging
Brand
Brand
There are 1650 products.
Reference: 969
Large probe, for perfect centring of the repair and easier resin injection.
Reference: 971
Brand: REPARBRISE
Round polishing felt to perfect the finish of surface impacts. Use our 971 felt with our 949 polish using our windshield polishers ref.10357, or 645. Sold individually
Reference: 974
The syringe ref.974 will allow you to take the injection resin from inside the bottle or pipette and then inject it into the injector. You can also use the syringe to fill drill holes and cracks in your Windshield.
Reference: L110
Dispenser for masking paper réf : 200 x 4 ; 450 x 4, 700 x 4, 900 x 4 and réf 9741 Accepts differents height of rolls up to 1400 mm. It is possible to adjust the height in order to lock the roll to the wish height. Could be use on horizontal or vertical position. Film is not include with the dispenser.
Reference: 979
Brand: REPARBRISE
Our 979 pen light provides a better view of the impact injection during the repair of your windshield.
Reference: 985
Vaccum plug to remove impurities from the windshield impact. Diameter 3cm The Vaccum plug is used with the vacuum pump ref.993.
Reference: 993
Brand: REPARBRISE
Vacuum pump delivered with hose ref.996 (quick connector on injector side and direct connection on pump) The pressure vacuum pump is used to assist the repair of the impact on your windshield, by creating an air vacuum. This helps to remove air and impurities from the impact before injecting the resin. Alternating pressure vacuum/pressure with your pump...
Reference: KIT501FC-HM-LC-HV-400
VEHICLE RELEASE TIME Drying time (23°-50%) Airbags 30 minutes
Reference: 994
Brand: REPARBRISE
Injector allowing you to inject windshield repair resin using a pressure vacuum pump. Used in KIT-1320 - TERMINATOR 1 AND 2, fits perfectly with our vertical or reversed windshield adaptor ref. ADAPT-PBV. It is suggested that you also order the injector to avoid leaks due to wear of the seal: - To replace the seal in contact with the windshield, use ref....
Reference: DESTOCK-MCK01
Cutter dispenser for electrostatic films and transparent stretch film rolls. (supplied without roll) Single unit
Reference: 1046
Brand: REPARBRISE
12V UV lamp with timer To connect this lamp to the 230V mains, simply adapt our mini transformer Ref.512. Please note: the maximum amperage of the replacement fuses is 2A. It is important to replace the UV neon (ref.931) at a frequency defined in accordance with standard NF R61-980, i.e: Continuous operation for 15 hours or approximately 90 repairs....
Reference: 1110
Brand: REPAR'VIT
The pressure vacuum pump 1110 is used to assist the repair of the impact on your windshield, by creating an air vacuum. This helps to remove air and impurities from the impact before injecting the resin. Alternating pressure vacuum/pressure with your pump will inject the resin uniformly into the impact.
Reference: DESTOCK-MEP2
Set of 2 magnetic plastic body panels. Protects against sanding, sticking and painting.
Reference: 1412
Brand: REPARBRISE
Our Glass-Primer 1412 is an adhesion primer for repairs to large areas of missing glass on the surface of your windshield. 120ml bottle
Reference: 2000
Brand: REPAR'VIT
Our 2000 REPAR'VIT® injection bridge is a support for injecting windshield repair resin. Our bridge can be used to repair impacts on the flat windshields of buses and lorries, as it has double adjustment for better positioning of the injector. It can be used with the standard FIX-2006 injector and the high-impact FIX-2005 injector.
Reference: 3200
Brand: REPARBRISE
REPAIR injector composed of a high quality cylinder + piston. Composed of 5 lips which allow an additional depression and a faster repair. Adapts to our injection bridges ref.51 and 9620. To avoid any leaks due to seal wear, we recommend that you also order the interchangeable end caps ref 3202 when purchasing the injector.
Reference: BIGKIT501FC-400
VEHICLE RELEASE TIME Drying time (23°-50%) Airbags: 30 minutes
Reference: DESTOCK-NET-DISK
Sold individually Magnetized microfiber to clean sanding paperThanks to its quality of absorption of sanding residus, the operator will reduce the consummation of sanding paper. Place the magnitized microfiber on the side of the area to sand, just make oftenly some pass on the microfiber during sanding.
Reference: 3202
Brand: REPARBRISE
Exchangeable nozzles for REPARBRISE 3200 injector (pack of 5). When you repair a windshield impact, it's important that the injector has uniform sealing when the resin is injected. It is now essential to change the nozzle of the 3200 injector as soon as it becomes damaged.
Reference: 4509W
Brand: REPARBRISE
Discover our half-ball drill specially designed for drilling cracks and impacts on your windshield. Made from high-quality materials, this drill guarantees optimum drilling precision and efficiency for highly accurate results. Sold individually
Reference: 4510NEW
Brand: REPARBRISE
Our 220V long UV lamp is a practical tool for curing crack resin to repair cracks in your windshield. (less than 5 minutes) It's highly portable, with sufficient power to ensure the resin cures quickly and effectively. Lightweight and ergonomic, it makes it easy to dry the 634 crack resin.
Reference: JPM-MBS
Small seal for SADURR® half-used cartridge preservative Sold individually
Reference: JGM-MBS
Large seal for SADURR® half-cartridge preservative Sold individually