Filter By
Categories
Categories
Packaging
Packaging
Brand
Brand
VBSA awarded ECOVADIS label
Banner
There are 1533 products.
Reference: DPO-585
Rivet Stem Remover It is often necessary to remove dor glasses without breaking them. Drilling out the rivet so you can remove the door glass is easy if you can remove the rivet stem. Rivet stems are made of steel and are impossible to drill out. Our rivet stem remover has contoured end so it will sit over the rivet and align perfectly with the rivet...
Reference: Marouflage
Designed for masking and protection during bodywork, painting or renovation work, it provides effective coverage of surfaces. - High resistance: limits the risk of tearing and guarantees optimal protection. - Good adhesion with masking tapes for clean and precise contours. - Suitable for all types of paint: ideal for bodywork, construction and crafts.
Reference: 818-12V
12V cigar lighter charger compatible with charging cable 1048-CABLEUSB. Works with our UV-1048 lamp, our 818 windshield heater, our LAMPE-3 and our LAMPE-F headlamp.
Reference: DST-734
REF-DST-734 T-handle wire threader with hole Just lay the wire in the notched tip and pass it through the polyurethane by pushing the tool from the inside to the outside.In the way, you can release the window. Always place the flat surface of the wire threader on the window, so that the hollow tube is not deformed.120 x 26 x 10 mm • 20 g
Reference: ruban-masquage
Masking tape is essential for clean and professional finishes in painting, bodywork and DIY. It provides effective protection for surfaces while guaranteeing clean and precise contours. - Good adhesion: adheres firmly to various surfaces without leaving residue after removal. - Solvent and heat resistant: ideal for bodywork and industrial painting...
Reference: DST-734BUS
Special wire threader for bus and trucks with 2 holes ( for square or braided wire and nylon wire.) The end of the needle has a special designed in order to introduce easy the wire through the urethane. Push it in the urethane, insert the wire inside the tube, remove the wire threader and lead the wire throughout the urethane, in order to be able to pic...
Reference: 818-220V
USB 3.0 adapter charger - 5V = 2A (Max) INPUT: 100-240V - 50-60 Hz - 0.5A OUTPUT: 5V = 2A Compatible with our 1048-CABLEUSB cable, it can be used for our 818 windscreen heater, our 1048 LED UV lamp, our LAMPE-3 and our LAMPE-F headlamp.
Reference: ECHAFAUDAGE-2M50
MOBILE SCAFFOLDINGIN ALUMINUM - LESS LONGSize of the platform of 2.50MAttention: Overall width: 2.67M with Ergots
Reference: film-masquage
The electrostatic masking film is specially designed for the protection of optics without dismantling during automotive painting and renovation work. - Available in 600 mm and 1200 mm to adapt to different surfaces. - Electrostatic adhesion for quick and effortless application. - Integrated tape resistant up to 130°C, ideal for paint booth applications. -...
Reference: PAS-195
Sold individually
Reference: POSTER-TERMINATOR
Poster TERMINATOR automatic windshield impact repair process 50 x 70 cm Available for export only with a product order. No delivery possible on its own
Reference: ENL842
Cutting blade. Length: 38mm- 55 x 30 x 38 mm 50 gBE CAREFUL: Ninja blades have been elaborated to fit on the Ninja knife.They should not be usedwith other knives.
Reference: ENO841
Cutting blade. Length: 25mm - 60 x 30 x 25 mm 45 gBE CAREFUL: Ninja blades have been elaborated to fit on the Ninja knife. They should not be used with other knives.
Reference: 769
Effectively remove traces of oil, insects and dust with 769 foam-based glass/windscreen cleaner. Ideal for use in industry, the automotive sector and construction, this product ensures impeccable cleanliness of glass surfaces. Characteristics: Powerful action: Dissolves traces of oil, insects and dirt in an instant Multi-purpose: Suitable for...
Reference: ENT840
cutting blade. lenght: 19mm- 56 x 30 x 19 mm 40 gBE CAREFUL: Ninja blades have been elaborated to fit on the Ninja knife. They should not be used with other knives.
Reference: POSTER-1320
Windshield impact repair process poster - 1320 - 50x70cm Please do not hesitate to ask for some poster when you proceed to ordering Available for export only with a product order. No delivery possible on its own
Reference: POSTER-TER2
Poster TERMINATOR2 automatic windshield impact repair process 50 x 70 cm Available for export only with a product order. No delivery possible on its own
Reference: DISK-NET-320
Disque carbure de silicium 320Disques Ø 77 mm.
Reference: ESB1304
EQUALIZER® blade 100mm.Serrated blades and sheathsThese patented blades are made of spring steel and specifically designed for our tools. They are sharpened with a unique double-serration method. Each serration is also serrated. this sharpening method gives our EQUALIZER® blades a smoother and faster cutting action than ever before. These blades will fit...
Reference: 768
Effectively remove traces of oil, insects and dust with the foam-based 768 glass/windscreen cleaner. Ideal for use in industry, the automotive sector and construction, this product ensures impeccable cleanliness of glass surfaces. Characteristics: Powerful action: Dissolves traces of oil, insects and dirt in an instant Multi-purpose: Suitable for...
Reference: ESB1312
EQUALIZER® blade 300mm.Serrated blades and sheathsThese patented blades are made of spring steel and specifically designed for our tools. They are sharpened with a unique double-serration method. Each serration is also serrated. this sharpening method gives our EQUALIZER® blades a smoother and faster cutting action than ever before. These blades will fit...
Reference: 770
Effectively remove traces of oil, insects and dust with the foam-based 770 glass/windscreen cleaner. Ideal for use in industry, the automotive sector and construction, this product ensures impeccable cleanliness of glass surfaces. Characteristics: Powerful action: Dissolves traces of oil, insects and dirt in an instant Multi-purpose: Suitable for...
Reference: LUNETTE1048
When repairing windscreens, it is essential to wear UV protection goggles, especially when using UV LED lamps, such as our UV lamp 1048. These goggles provide optimal protection against ultraviolet rays, thus reducing the risks to the eyes and guaranteeing maximum safety. Characteristics: - Anti-UV filtration: Effective protection against UV exposure -...
Reference: PEZ-120
Protect the paintwork on your vehicle's roof or hood when you're working on it, with our non-slip protective canvas. Ideal for bodybuilders and garages, it offers a practical and safe solution for fitting tools, screws and small assembly equipment without the risk of damaging the vehicle's surface. Dimensions and weight : Dimensions: 1720 x 700 x 2 mm....
Reference: EWA-1702
Extremely loadable. Made of massive metal. Can be used on virtually any passenger and commercial vehicle. Specially recommended for the BMW 5 and BMW 7 series.- 104 x 38 x 140 mm- 518 g
Reference: KIT-PCP
Repair kits for professional rain and light sensors Ideal for repairing and maintenance of your outdoor lighting and rain detection systems. COMPOSITION :1 plastic case : REF-458 1 activator Ref. ACT-KPR2 gel in syringe Ref. REG-CAPLUIE1 pack of mixing nozzles (x10) Ref. BUSE-REG1 microfiber REF-CHAMBAdhesive pads (x 5) REF-KPL-198 Adhesive pads (x 5)...
Reference: RK-100A
These squeegee blades offer an effective solution for cleaning and preparing glass and plastic surfaces. Ideal for removing adhesive residues, paint or stubborn dirt, they guarantee precise, careful work without damaging delicate surfaces. These blades combine durability and safety. Their razor-sharp cutting edge ensures optimum use for all workshop...
Reference: KIT-PCP-MAX
Complete repair kits for professional rain and light sensors, enabling you to repair all LV, truck, etc. sensors.... Ideal for maintaining and repairing your outdoor lighting and rain detection systems. COMPOSITION : 1 heating box REF-COF-REG1 activator Ref. ACT-KPR2 gels in syringe Ref. REG-CAPLUIE-MAXI1 gel in syringe Ref. REG-CAPLUIE21 microfiber...
Reference: FB076
cutting length: 24mm 17g Sold individually
Reference: FB081
Lame à découper, courbe profondeur de coupe : 60 mm longueur totale : 85 mm vendue à l'unité
Reference: GRILLE-SOUDAGE
Reinforce your plastic repairs with our reinforcement grid specially designed for welding automotive parts. Ideal for bodybuilders and automotive professionals, this grid provides a strong, durable hold on damaged areas, guaranteeing weld strength on items such as bumpers, trim, mirrors and other plastic parts. Made from high-quality stainless steel, this...
Reference: FB083-DESTOCK
REF-FB-083 Hook blade with U shapeCutting length: 10 mmSold individually
Reference: ASP-1000
Discover the BI-MOTOR steel vacuum cleaner, a powerful and compact model, perfect for demanding work environments! Power: 1000W (single-phase 220-240V) Tank capacity: 15 liters Suction: 21 KPa Air flow: 48 L/s Diameter of the tank: 320 mm Dimensions: H: 65 cm, L: 46 cm, W: 42 cm Function: Wet and dry vacuuming Tank material: Durable stainless steel Cable...
Reference: FB101
REF-FB-101 Hook blade with U shapeCutting length: 60 mmSold individually
Reference: ASP-1000-BROSSE
Optimize cleaning with this vacuum brush, specially designed to be 100% compatible with the ASP-1000. Ideal for effectively vacuuming dust, debris and dirt from different types of surfaces. Sold individually Characteristics: - Perfectly compatible with the ASP-1000 - High-performance brush for deep cleaning - Robust and durable design - Quick attachment...
Reference: KIT-INDUCTION-ALU
The KIT-INDUCTION-ALU is a device specially designed for straightening aluminum bodywork, offering a fast and efficient solution while preserving the original paint. Thanks to its integrated timer, it allows you to regulate the heating time and avoid any risk of burning or damage to the surface. Its innovative head, with two flat sides and a central...
Reference: ASP-1000-RALLONGE
Increase the reach of your vacuum cleaner with this extension cord specially designed to be compatible with the ASP-1000. Ideal for reaching hard-to-reach areas without moving the vacuum cleaner, it guarantees efficient and convenient cleaning. Sold individually Features: - Extended reach for greater comfort - Strong, flexible materials for a long service...
Reference: KIT-DEBOSS822
This 220V induction heating system is designed for the fast and precise repair of dents, while preserving the vehicle's original paintwork. Equipped with an integrated timer, it allows you to regulate the heating time in order to avoid overheating and damage to the surface. Its specially designed head, with two flat areas and a central hollow, facilitates...
Reference: ASP-1000-BROSSE-POIL
Improve the efficiency of your vacuum cleaner with this brush specially designed for the ASP-1000. Ideal for gentle cleaning on sensitive surfaces while ensuring optimal suction. Sold individually Characteristics: - Perfectly compatible with the ASP-1000 - Flexible and resistant bristles to protect delicate surfaces - Quick attachment and easy to use -...
Reference: KIT-POINCON
This bumper punch kit is specially designed for garages and body shops, enabling them to make precise, clean holes in bumpers and other plastic parts. Ideal for installing parking sensors or for any work requiring precise cuts, this kit is an indispensable tool in repair shops. To be used with a screwdriver or ratchet wrench. Drilling can be from outside...
Reference: FB110
REF-FB-110 Lame à crochet en U Profondeur de coupe 40 mmvendue à l’unité
Reference: KIT-POINTEAUX
This complete kit of dent removal pins is ideal for levelling sheet metal with precision, thanks to its pins of different shapes (rounded, pointed, flat) that adapt to all situations. Perfect for meticulous bodywork, it allows straightening deformations without altering the surface. Kit contents: - Plastic case for easy storage and transportation. -...
Reference: FB121
Cutting blade, straightCutting length: 26 mmSold individually
Reference: FB123
profondeur de coupe : 40 mm longueur totale : 74 mm vendue à l'unité
Reference: EPDM-BAGUETTE-TR
Create strong, flexible plastic repairs with these triangular-shaped EPDM-modified polypropylene (PP-EPDM) welding rods, specially designed for bodybuilders and garages. Ideal for welding on bumpers, trim and other plastic parts, these rods combine excellent elasticity and high strength, guaranteeing professional, long-lasting results. Their triangular...
Reference: FB154
REF-FB-154 Lame à crochet en U Profondeur de coupe 45 mmvendue à l’unité
Reference: PA-BAGUETTE-T
Achieve reliable, long-lasting plastic repairs with these triangular-shaped PA (Polyamide, also known as nylon) rods, specially designed for bodybuilders and garages. Perfect for technical plastic parts such as tanks, brackets or trim, these rods ensure even melting and optimum adhesion for professional results. Their triangular cross-section enables...
Reference: PACK-GLUE1KG
The glue sticks for dent removal are specially designed for optimal adhesion to the bodywork, guaranteeing effective repair of dents without damaging the paintwork. ✔ High performance: ultra-adhesive glue ensures the dent pulling tips are firmly attached. ✔ Universal compatibility: can be used with most glue guns for dent pulling. ✔ Easy to apply and...
Reference: FB211
Lame à crochet crantéeprofondeur de coupe : 24 mmvendue à l'unité
