VBSA awarded ECOVADIS label
Banner
Exchangeable nozzles for REPARBRISE 3200 injector (pack of 5).
When you repair a windshield impact, it's important that the injector has uniform sealing when the resin is injected. It is now essential to change the nozzle of the 3200 injector as soon as it becomes damaged.
Reference: 1700
Brand: REPAREGLASS
REPAREGLASS® is used and approved by a large number of car manufacturers. Discover our glazing repair kit, complete with all the tools and accessories you need to carry out quality repairs to your windscreen. Ideal for professionals.
Reference: 970
Brand: REPARBRISE
Our special rigid plastic squares, also known as mylar squares, are specially designed to polymerise the resin on the surface for impact repair. Lay the mylar sheet over the finishing resin and then use a UV lamp to polymerise the impact repair on the windshield. Bag of 10 squares.
Reference: 959
Brand: REPARBRISE
Carbide-tipped pen, used to remove surface impurities on the impact before repairing it.
Reference: 983
Brand: REPARBRISE
Seals (X2) for large impact adapter 946. It is important to change the seals regularly to ensure a good seal when injecting the Windshield Repair Resin.
Reference: 958
Brand: REPARBRISE
Our suction pad gel is specially designed to reinforce the adhesion of suction pads on windshields and car windows. 100ml jar
Reference: 51
Brand: REPAREGLASS
Our 51 REPAREGLASS® injection bridge is a support for injecting windshield repair resin and is used with our 3200 injector.
Reference: 979
Brand: REPARBRISE
Our 979 pen light provides a better view of the impact injection during the repair of your windshield.
Reference: 3200
Brand: REPARBRISE
REPAIR injector composed of a high quality cylinder + piston. Composed of 5 lips which allow an additional depression and a faster repair. Adapts to our injection bridges ref.51 and 9620. To avoid any leaks due to seal wear, we recommend that you also order the interchangeable end caps ref 3202 when purchasing the injector.
Reference: 946
Brand: REPARBRISE
Warning: sold without seal, seal reference in stock 983 Adapter for repairing large impacts, it adapts to our 3200 and 994 injectors to enable you to repair large impacts on the windshield. It can be used with our 1320, 951 and TERMINATOR 1 and 2 kits.
Reference: 439
Brand: REPAREGLASS
Round sticker Ø 3cm pack of 100 to personalise For impacted windshield, your customer has an impact and you can't repair it immediately. Protect the impact with our protective sticker for a few days, to avoid impurities in the windscreen. The round self-adhesive patch protects the impact. It protects it from moisture and impurities before the repair is...
Reference: 940
LED lighted mirror (glass) for repairing windshield impacts, this mirror allows you to visualise the impact throughout its repair, it has LED lighting. Size. 6.5cm x 4cm
Reference: RS-2030
Resin dispenser pack consisting of 5 syringes and 3 needles. The RS-2030 syringe lets you remove the injection resin from the bottle or pipette and inject it into the injector. You can also use the syringe to fill drill holes and cracks in your windscreen.
Reference: 9620
Brand: REPARBRISE
Our 9620 REPARBRISE® injection bridge is a support for injecting windshield repair resin. It can be used with a 3200 manual injector, but also with the 994 vacuum/pressure injector. You'll find our 9620 bridge in our 1320, TERMINATOR and TERMINATOR2 windshield repair kits.
Reference: 977
Brand: REPARBRISE
Large-format 30 x 20 cm UV screen to protect against ultra-violet light during repairs.
Reference: 226
Ballbreaker for your own training. This tool is specially designed to create an impact on a test windscreen, when you want to train new colleagues or as part of windscreen repair training.
Reference: HOS-2000-L
Long connection hose for bus and truck, vans, trams, etc... compatible with 1110 and PMP-ADVANTAGE vacuum pumps, our 5095 and 5096 injectors. Used in our 1330 and 1330SPECIAL kits, not compatible with our 1320 and TERMINATOR 1 and 2 kits. Length : 2.50M
Reference: 499
Cigar-lighter power strip. Allows you to recharge appliances such as UV lamps, drills, hoovers, etc. Ideal for buses and trucks.
Reference: 940
LED lighted mirror (glass) for repairing windshield impacts, this mirror allows you to visualise the impact throughout its repair, it has LED lighting. Size. 6.5cm x 4cm
Reference: 645
Brand: REPARBRISE
12V carbide drill supplied with integrated chuck lock, for drilling the impact point on your windshield before injecting the resin. Use with our 934, 4509w and 701 carbide drills. This drill can also be used with a felt for polishing the impact after repair. 4M cable extension
Reference: 974
The syringe ref.974 will allow you to take the injection resin from inside the bottle or pipette and then inject it into the injector. You can also use the syringe to fill drill holes and cracks in your Windshield.
Reference: 818
The WINDSHIELD HEATER warms the repair area, usb powered, supplied with adapter + 5 thermometers Ref. 961 12v cigarette lighter and 220v mains, 2.5m cable, ideal for impact repairs, red or black depending on availability.
Reference: TER-CHARGEUR
Brand: TERMINATOR
Charger for TERMINATOR 1 AND 2 and ULTRAPOSE EVOLUTION kits. Connect the charger to your TERMINATOR or ULTRAPOSE EVOLUTION to recharge the battery.
Reference: LUNETTE1048
UV protection glasses It is absolutely essential to wear protective glasses during windshield repairs when using our LED UV lamps, for example our UV lamp 1048.
Reference: LP10
Plastic magnifying glass (15x zoom) with transparent base. Excellent tool for identifying the type of impact, but also for viewing the impurities contained within it.
Reference: 769
Brand: REPARBRISE
Eliminates traces of oil, insects and dust. Used in industry, cars and construction. For cleaning windshields, windows and outside mirrors. Sold in 5L drums Also available - 750ml aerosol - Ref.768 and 20L drum - Ref.770
Reference: 993
Brand: REPARBRISE
Vacuum pump delivered with hose ref.996 (quick connector on injector side and direct connection on pump) The pressure vacuum pump is used to assist the repair of the impact on your windshield, by creating an air vacuum. This helps to remove air and impurities from the impact before injecting the resin. Alternating pressure vacuum/pressure with your pump...
Reference: PEZ-120
Protect the paintwork on your vehicle's roof or hood when you're working on it, with our non-slip protective canvas. Ideal for bodybuilders and garages, it offers a practical and safe solution for fitting tools, screws and small assembly equipment without the risk of damaging the vehicle's surface. Dimensions and weight : Dimensions: 1720 x 700 x 2 mm....
Reference: DPG
It's imperative to test the calibration of your vacuum pump at minimum once a year, to ensure quality repairs for your customers. French Standard regulation NF R61-980... Frequency of use: once a year. This new regulation allows to ensure that the pressure and vaccum cycles made from the pump are correct ( Pressure tolerance is 0,1 Bar) in order to avoid...
Reference: 946
Brand: REPARBRISE
Warning: sold without seal, seal reference in stock 983 Adapter for repairing large impacts, it adapts to our 3200 and 994 injectors to enable you to repair large impacts on the windshield. It can be used with our 1320, 951 and TERMINATOR 1 and 2 kits.
Reference: 5096
Brand: REPARBRISE
Large impact injector for kit ref.1330 and kit ref.1330SPECIAL. Supplied with seal, not compatible with our old 1310 kit.
Reference: 995
Brand: REPARBRISE
994 injector seal provides a uniform seal for injecting resin into the impact during Windshield repair. It is important to change the seals frequently. Available individually or in packs of 10.
Reference: FIX-2025
Brand: REPAR'VIT
Replacement piston for our bridges REF-2000, REF-367, REF-9620, and our suction cup REF-GEZ-543-1.
Reference: 524
Brand: REPARBRISE
24V/12V voltage transformers for buses and trucks
Reference: 5095
Brand: REPARBRISE
Standard injector for kit ref.1330 and kit ref.1330SPECIAL. Supplied with seal, not compatible with our old 1310 kit.
Reference: HOS-2000
Connection hose for vacuum pump 1110 and PMP-ADVANTAGE and injector 5095 or 5096 for windshield repair. Length: 1M
Reference: FLEXI-BLADE
Flexible wiper blade made in silicone. Allow to ease the removal of the water from surface to be dried. Appliable on the glass and metal.
Reference: TER-BATTERIE
Brand: TERMINATOR
Battery for TERMINATOR 1 and 2 Kit and ULTRAPOSE EVOLUTION. You can recharge this battery directly on the TERMINATOR or ULTRAPOSE EVOLUTION, using our TER-CHARGEUR charger.
Reference: 983
Brand: REPARBRISE
Seals (X2) for large impact adapter 946. It is important to change the seals regularly to ensure a good seal when injecting the Windshield Repair Resin.
Reference: 538
Large-format 30 x 40 cm UV screen to protect against ultra-violet light during repairs. Used by the bus and truck industry.
Reference: 931
Brand: REPARBRISE
Single U.V. neon 135 mm - 931- for 1046 and UVB-150 lamp
Reference: 1110
Brand: REPAR'VIT
The pressure vacuum pump 1110 is used to assist the repair of the impact on your windshield, by creating an air vacuum. This helps to remove air and impurities from the impact before injecting the resin. Alternating pressure vacuum/pressure with your pump will inject the resin uniformly into the impact.
Reference: FIX-2005
Brand: REPAR'VIT
Large impact resin filler injector for REF-2000 Ø 1.5 cm bridge.
Exchangeable nozzles for REPARBRISE 3200 injector (pack of 5).
When you repair a windshield impact, it's important that the injector has uniform sealing when the resin is injected. It is now essential to change the nozzle of the 3200 injector as soon as it becomes damaged.
