Special windshield repair light pen

Reference: 977

Brand: REPARBRISE

Large format UV screen 30 x 20 cm - windshield impact protection

Large-format 30 x 20 cm UV screen to protect against ultra-violet light during repairs.

Reference: 994

Brand: REPARBRISE

Injector for windshield repair resin for KIT-1320 - TERMINATOR 1 AND 2

Injector allowing you to inject windshield repair resin using a pressure vacuum pump. Used in KIT-1320 - TERMINATOR 1 AND 2, fits perfectly with our vertical or reversed windshield adaptor ref. ADAPT-PBV. It is suggested that you also order the injector to avoid leaks due to wear of the seal: - To replace the seal in contact with the windshield, use ref....

Reference: 974

Special syringe for injecting resin to repair windshields

The syringe ref.974 will allow you to take the injection resin from inside the bottle or pipette and then inject it into the injector. You can also use the syringe to fill drill holes and cracks in your Windshield.

Reference: TER-CHARGEUR

Brand: TERMINATOR

Charger for TERMINATOR 1 AND 2 and ULTRAPOSE EVOLUTION kits

Charger for TERMINATOR 1 AND 2 and ULTRAPOSE EVOLUTION kits. Connect the charger to your TERMINATOR or ULTRAPOSE EVOLUTION to recharge the battery.

Reference: 931

Brand: REPARBRISE

Single 135 mm UV neon for 1046 and UVB-150 lamp

Single U.V. neon 135 mm - 931- for 1046 and UVB-150 lamp 

Reference: 993

Brand: REPARBRISE

Pressure vacuum pump for REPAR'VIT Senior 1320 kit

Vacuum pump delivered with hose ref.996 (quick connector on injector side and direct connection on pump) The pressure vacuum pump is used to assist the repair of the impact on your windshield, by creating an air vacuum. This helps to remove air and impurities from the impact before injecting the resin. Alternating pressure vacuum/pressure with your pump...

Reference: 996

Brand: REPARBRISE

1M hydraulic connection hose for 993 pump

Connection hose with quick-fit connector (female on 1 side only) suitable only for 993 vacuum pump and 994 injector. Length: 1M

Reference: FIX-2005

Brand: REPAR'VIT

Large impact resin filler injector for REF -2000 bridge

Large impact resin filler injector for REF-2000 Ø 1.5 cm bridge.

Reference: SATELLITEDEPONT

Satellite for windshield crack repair kit

Satellite for 3200 injector for manual injection of crack resin to repair cracks in windscreens (including rubber and leg protection).

Reference: 940

LED lighting mirror (glass)

LED lighted mirror (glass) for repairing windshield impacts, this mirror allows you to visualise the impact throughout its repair, it has LED lighting. Size. 6.5cm x 4cm

Reference: 539

Round UV screen Ø 9cm for deck 9620 - Impact protection

Round UV screen protects the point of impact from UV light when injecting windscreen windshield repair resin. For use with kit 1320 and KIT TERMINATOR 1 AND 2 For use with 9620 bridge Ø 9cm

Reference: 5BX-02010

Rubber seals Ø 1.5 cm for large impact injector 5096 and FIX-2005

Ø 1.5 cm seals for large impact injector 5096 and FIX-2005. It is important to change the seals regularly to ensure a good seal when injecting windshield repair resin. 1 bag of 5 pieces

Reference: 645

Brand: REPARBRISE

12V carbide drill for impact drilling

12V carbide drill supplied with integrated chuck lock, for drilling the impact point on your windshield before injecting the resin. Use with our 934, 4509w and 701 carbide drills. This drill can also be used with a felt for polishing the impact after repair. 4M cable extension

Reference: FIX-5063-DESTOCK

Brand: REPAR'VIT

Aluminium screw for injection bridge 367

Aluminium screw for injection bridge 367, holds injectors 5095 and 5096 to the windshield to ensure a seal during resin injection.

Reference: 226

Ballbreaker for your own training.

Ballbreaker for your own training. This tool is specially designed to create an impact on a test windscreen, when you want to train new colleagues or as part of windscreen repair training.

Reference: HOS-1000-T

2.50M vacuum pump connector hose for TERMINATOR 1 and 2 kits

Vacuum pump connector hose for TERMINATOR 1 and 2 kits - Ideal for repairing impacts on the Windshields of utility vehicles, trucks, buses, trams, etc....  Length: 2.50 M

Reference: FIX-5035

Brand: REPAREGLASS

Plastic screw for FIX-2001 injection bridge

Plastic screw for injection bridge FIX-2001 allows the bridge to be adjusted to create a uniform sealing.

Reference: 499

Cigar-lighter multi-socket box

Cigar-lighter power strip. Allows you to recharge appliances such as UV lamps, drills, hoovers, etc. Ideal for buses and trucks.

Reference: 769

Brand: REPARBRISE

Window / windshield cleaner 5L - Mosquito repellent -769

Eliminates traces of oil, insects and dust. Used in industry, cars and construction. For cleaning windshields, windows and outside mirrors. Sold in 5L drums Also available - 750ml aerosol - Ref.768 and 20L drum - Ref.770

Reference: 768

Brand: REPARBRISE

Foam window / windshield cleaner 768 - Mosquito repellent

Eliminates traces of oil, insects and dust. Used in industry, cars and construction. For cleaning windshields, windows and outside mirrors. Sold in 750 ml aerosols or in box of 12. Also available - 5L drum - Ref.769 and 20L drum- Ref.770

Reference: 524

Brand: REPARBRISE

24V/12V voltage transformers for buses and trucks

24V/12V voltage transformers for buses and trucks

Reference: 5096

Brand: REPARBRISE

Large impact packer 5096 for 1330 and 1330SPECIAL kits

Large impact injector for kit ref.1330 and kit ref.1330SPECIAL. Supplied with seal, not compatible with our old 1310 kit.

Reference: HOS-2010

Rubber Seals (x2) for HOS-2000, HOS-2000-L, HOS-1000-T vacuum pump hoses

Set of 2 replacement rubber seals for HOS-2000, HOS-2000-L and HOS-1000-T hose It is important to change the rubber seals frequently to ensure that the windshield repair resin is injected correctly. The rubber seal is situated inside the connector on your hose. If there is a leak in the hose, you can change the seal by using a wrench and unscrewing the...

Reference: PEZ-120

Anti-skid roof/hood liner

Protect the paintwork on your vehicle's roof or hood when you're working on it, with our non-slip protective canvas. Ideal for bodybuilders and garages, it offers a practical and safe solution for fitting tools, screws and small assembly equipment without the risk of damaging the vehicle's surface. Dimensions and weight : Dimensions: 1720 x 700 x 2 mm....

Reference: 617

Cylinder vacuum nozzle

Cylinder vacuum nozzle. Removes air trapped in the impact. Supplied with specific hose without connection and a smaller diameter. (for use with the 3200 cylinder and 993 vacuum pump).

Reference: 969

Long probe for impact repair

Large probe, for perfect centring of the repair and easier resin injection.

Reference: ISHP-BIG

Joints pour adaptateur pare-brise ADAPT-PBV - Lot de 10

Reference: ADAPT-PBV

Adapter for vertical or reverse glazing

ADAPTER FOR VERTICAL OR INVERTED GLAZING Truck, bus, tractor, public works, combine harvester type.... The adaptor enables repairs to be carried out on vertical windscreens with a negative tilt of up to 20°. For use with injector 994, our 9620 bridge for TERMINATOR 1 and 2 cases, and 1320. Not compatible with FIX-2001, 2000, 367 and 51 bridges, cannot be...

Reference: 994JOINT

Brand: REPAREGLASS

Seal for 994CLAP plunger for 994 injector

If you have problems with leaks on the top nozzle of the 994 injector, you will need to change the small black seal inside the 994CLAP plunger. Seal for 994CLAP plunger for 994 injector

Reference: HOS-2002

Cleaning brush for injector 5069 or 5062

Nylon cleaning brush for injector 5069 or 5062 to clean excess injection resin from the windscreen