Grease Pump - N433 - Clearance Sale

Reference: JEU-ALLEN6-N461-DESTOCK

Allen Wrench Set (6-piece) - N461 - Clearance Sale

Please note: Only 4 units in stock Allen wrench set (9 pieces)  2.5 / 3 / 4 / 5 / 6 / 8

Reference: T-SOUPLE-M6-N459-DESTOCK

Flexible screwdriver with M6 bit - N459 - CLEARANCE SALE

Note: Only 17 units in stock Designed to make tightening and loosening screws easier in hard-to-reach areas. Its flexible shaft allows you to reach fasteners in tight spaces while maintaining good maneuverability. M6 End Cap

Reference: 8PZ010607-971-DESTOCKAGE

CSC TOOL Target - KIA / HYUNDAI 1-05 - Clearance Sale

Reference: BROSSE-MET-N437-DESTOCK

Round Metal Brush - N437 - Clearance Sale

Please note: Only 31 units in stock OUTER DIAMETER 160 MM, THICKNESS 30 MM; INNER DIAMETER 15 MM, THICKNESS 15 MM

Reference: 282CAS-AGRAFES1000-N379

Pre-cut staples in 3 points (repair by welding) - pack of 1000 - clearance sale

Sold in packs of 1000 1 pack available These pre-cut 3-point staples are specially designed for plastic repair by welding. Their innovative design facilitates the work of professionals by simplifying the finishing stage: simply break off excess tabs with pliers after welding. Applications : Repair cracks, breaks or damaged areas on bumpers, dashboards and...

Reference: P-DENUDE-N454-DESTOCK

Wire Stripper - N454 - Clearance Sale

Please note: Only 2 units in stock Designed to make it easier to remove and handle clips and fasteners found on vehicles. It allows you to remove fasteners with precision, while minimizing the risk of damaging the clips or trim.

Reference: ALLEN-N476-DESTOCKAGE

12 Allen Wrenches - N476 - Clearance Sale

Please note: Only 17 units in stock In fair condition There are only a few minor cosmetic flaws 12 Allen wrench

Reference: NEC398-N427-DESTOCK

Power Advance Cold Knife - N427 - Clearance Sale

Please note: Only 5 units in stock Designed with an adjustable Y-shaped mounting system and a unique blade retention system that allows for blade changes in seconds and precise depth adjustment.

Reference: PORTE-EMBOUT-N465-DESTOCK

Screwdriver with bit holder - N465 - clearance sale

Please note: Only 71 units in stock Allows you to use various interchangeable bits to easily adapt to the different types of screws encountered during jobs.

Reference: 285CAS-AGRAFES-N386

Pre-cut M-shaped staples for external corners (weld repair) - Bag of 1000 - N386

Sold in packs of 1000 1 pack available These pre-cut M-shaped staples are specially designed for plastic repair by welding. Their innovative design facilitates the work of professionals by simplifying the finishing stage: simply break off excess tabs with pliers after welding. Applications : Repair cracks, breaks or damaged areas on bumpers, dashboards...

Reference: DESTOCK-V125-KRD4

Special 125 mm paintless dent removal suction cup for KRD4 and KRD5

Please note: Only 9 units in stock This special 125 mm suction cup is designed for use with the REPAR'BOS KRD4 and KRD5 kits. Ideal for extensive dents, it ensures maximum adhesion thanks to its vacuum system, allowing powerful and uniform traction without damaging the original paintwork. Features and benefits: - Diameter of 125 mm: Perfect for large...

Reference: FIX-5063-DESTOCK

Brand: REPAR'VIT

Aluminium screw for injection bridge 367

Please note: Only 69 units in stock The aluminum screw for injection bridge 367 is specially designed to secure injectors 5095 and 5096 to the windshield. This screw guarantees perfect sealing during resin injection, which is essential for effective and long-lasting impact repairs. Made from high-quality aluminum, it offers strength and reliability for...

Reference: DESTOCK-MB-009-05

Medium ocher steel brush - 23 mm

Please note: Only 2 units in stock  Pack of 5

Reference: SERRE-DURITE-N469-DESTOCK

Hose Clamp - N469 - Clearance Sale

Please note: Only 2 units in stock Effectively secures hoses to minimize fluid leakage during disassembly, replacement, or repair operations. Ideal for workshop use, it particularly facilitates operations requiring the removal of components from the cooling system or other systems equipped with flexible hoses. Its easy-to-use design allows you to work...

Reference: 8PZ010607-981-DESTOCKAGE

CSC TOOL Target - HONDA 1-06 - Clearance Sale

Please note: Only 2 targets available CSC TOOL - HONDA 1-06

Reference: COVER-AUTO

PVC or PVC-Polyester car covers

Please note: Only 8 units in stock PVC or PVC-Polyester car covers There are two product ranges: - L: 100% PVC - F: PVC + Viscose + Polyester Suitable for garages and exteriors. Protects against rain, dust and damp. Models to suit all makes and models of car. F range: PVC + Viscose + Polyester Ref. COVER214F 4.30 x 1.56 x 1.41M BREACK (Only 8 in stock)

Reference: SPA-400-N505-DESTOCK

Sensor Removal Spatula - N505 - Clearance Sale

Please note: Only 7 units in stock The color of the handle may vary depending on availability The sensor removal spatula is designed to facilitate the removal and handling of various sensors during automotive repair and maintenance operations. Its shape allows for precise work on components that require careful removal, while minimizing the risk of damage...

Reference: ALLEN-N471-DESTOCKAGE

7-9/32 Allen Wrenches - N471 - Clearance Sale

Please note: Only 23 units in stock 7-9/32 Allen wrench

Reference: PINCE-COLLIER-N468-DESTOCK

Cable Clamp - N468 - Clearance Sale

Please note: Only 1 units in stock The clamp pliers are designed to make it easier to handle and tighten clamps during automotive repair and maintenance work. They allow you to work with precision and efficiency, especially in hard-to-reach areas.

Reference: BUSE-496-DESTOCKAGE

Dosing Nozzle for Plastic Processing - Clearance Sale

Note: Only 25 nozzles available Specially designed for auto body shops and automotive repair professionals, this spot-heating nozzle simplifies the preparation of plastic surfaces before welding. It allows you to focus and apply heat precisely to specific areas, ensuring optimal plastic preparation for durable and aesthetically pleasing repairs. Made of...

Reference: FEUTRE-MOUSSE-N431-DESTOCK

Velcro Foam Felt - N431 - Clearance Sale

Please note: Only 61 units in stock The foam pad is an accessory designed for polishing, buffing, and finishing automotive surfaces. Its circular shape allows for convenient use with compatible polishing equipment and makes it easy to work on different areas of the vehicle. 1 VELCRO SIDE / 1 FOAM SIDE, DIAMETER 80 MM, THICKNESS 30 MM

Reference: DESTOCK-MCK01

Cutter dispenser for electrostatic films and transparent stretch film rolls

Please note: Only 80 units in stock Cutter dispenser for electrostatic films and transparent stretch film rolls. (supplied without roll) Single unit

Reference: BUSE-497-DESTOCKAGE

Nozzle for plastic processing - N497 - Clearance Sale

Note: Only 25 nozzles available Specially designed for auto body shops and automotive repair professionals, this nozzle simplifies the preparation of plastic surfaces. It allows for targeted heat application to cylindrical areas, ensuring optimal plastic preparation for durable and aesthetically pleasing repairs. Made of high-quality steel, this nozzle...

Reference: SPATULE-N438-DESTOCK

Right-Angle Clip-On Spatula - N438 - Clearance Sale

Note: Only 14 units in stock The right-angle clip removal tool is specially designed to facilitate the removal of clips, staples, and fasteners found on vehicles. Its angled design allows for easier access to hard-to-reach areas and enables precise work during removal operations. TIP WIDTH: 20 MM X 40 MM LONG / OPENING DIMENSIONS: 7 MM WIDE X 15 MM DEEP

Reference: DIST1-SAV-DESTOCK

Soap dispenser with push extraction - 1Kg

Optimize the hygiene of your workshop with our push-button soap dispenser. Designed for intensive use, it allows for precise and controlled distribution of soap, ideal for hands exposed to oils, greases and other mechanical products. Made from robust materials, this dispenser is perfectly suited to the demanding environments of garages and repair shops....

Reference: DESTOCK-PSP150

Protective pads for parking sensors - ⌀18mm

Please note: Only 69 units in stock Effectively protect your parking sensors during bodywork repairs with these practical and reliable pads. Key features: Optimum protection: Prevents damage to sensors and seals during sanding, painting and other work. Precise design: Customized shape and diameter (Ø18 mm) for perfect sensor coverage. Ease of use: Quick...

Reference: DESTOCK-NET-DISK

Magnetic microfiber for wiping disc dust

Optimize your sanding work with this innovative magnetic microfiber, designed for bodybuilders and garages. Key features: Guaranteed savings: considerably reduces abrasive disc consumption thanks to its high dust absorption capacity. Practical application: Attaches directly to the bodywork, close to the operator, thanks to an integrated magnet on the...

Reference: COUPE-CABLE-N460-DESTOCK

Cable Cutter - N460 - Clearance Sale

Please note: Only 6 units in stock Designed to easily and cleanly cut various types of cables during automotive repair, maintenance, and disassembly. It provides precise and efficient cutting while offering a comfortable grip.

Reference: ALLEN-N472-DESTOCKAGE

8-5/16 Allen Wrenches - N472 - Clearance Sale

Please note: Only 25 units in stock In good condition There are only a few minor cosmetic flaws 8-5/16 Allen wrench

Reference: DESTOCK-PRP21

Piston automatique - Equalizer Powerpump

Please note: Only 3 units in stock