VBSA awarded ECOVADIS label
Banner
The Equalizer Ninja and Ninja GT are revolutionary auto glass removal tools that allow you to remove any glass fast and effortlessly. They have the look and feel of a cold knife, but cut with the power of 22,000 cutting strokes per minute. Here is how they work: the blade moves back and forth at
22,000 strokes per minute. As you pull the Equalizer Ninja forward, it is retracting and then thrusting
into the urethane at an astonishing rate of 367 times a second. Jobs that took several minutes now take
only seconds with now strain on your body. A unique feature is Ninja GT’s ability to cut under hoods,
trunk lids, or anything that hangs over the glass and obstructs your ability to cut. When you encounter
a hood, visor or trunk lid, you can position the blade around so it sits at a 90° angle. This makes the
tool short enough to go under these areas.
- 365 x 275 x 125 mm 2.110 g
The kit contains :
REF-ENJ147 - 1 Special air-powered knife, air consumption: 115l/min, air coupling (raccord dair) R1/4"
REF-ENT840 - 2 Cutting blade. Length: 19mm
REF-ENO841 - 3 Cutting blade. Length: 25mm
REF-ENL842 - 2 Cutting blade. Length: 38mm
REF-ENK148C - Padded carrying case 345 x 265 x100mm
BE CAREFUL: Ninja blades have been elaborated to fit on the Ninja knife.
They should not be used with other knives.
Secure payment
FREE SHIPPING from 150,00 € H.T. (France métropolitaine)
Certified organization
The Equalizer Ninja and Ninja GT are revolutionary auto glass removal tools that allow you to remove any glass fast and effortlessly. They have the look and feel of a cold knife, but cut with the power of 22,000 cutting strokes per minute. Here is how they work: the blade moves back and forth at |
EQUALIZER® Ninja standard kit
€0.00 |
|
cutting blade. lenght: 19mm |
cutting blade. lenght: 19mm
€0.00 |
|
Cutting blade. Length: 25mm |
Cutting blade. Length: 25mm
€0.00 |
|
Cutting blade. Length: 38mm |
Cutting blade. Length: 38mm
€0.00 |
The Equalizer Ninja and Ninja GT are revolutionary auto glass removal tools that allow you to remove any glass fast and effortlessly. They have the look and feel of a cold knife, but cut with the power of 22,000 cutting strokes per minute. Here is how they work: the blade moves back and forth at
22,000 strokes per minute. As you pull the Equalizer Ninja forward, it is retracting and then thrusting
into the urethane at an astonishing rate of 367 times a second. Jobs that took several minutes now take
only seconds with now strain on your body. A unique feature is Ninja GT’s ability to cut under hoods,
trunk lids, or anything that hangs over the glass and obstructs your ability to cut. When you encounter
a hood, visor or trunk lid, you can position the blade around so it sits at a 90° angle. This makes the
tool short enough to go under these areas.
- 365 x 275 x 125 mm 2.110 g
The kit contains :
REF-ENJ147 - 1 Special air-powered knife, air consumption: 115l/min, air coupling (raccord dair) R1/4"
REF-ENT840 - 2 Cutting blade. Length: 19mm
REF-ENO841 - 3 Cutting blade. Length: 25mm
REF-ENL842 - 2 Cutting blade. Length: 38mm
REF-ENK148C - Padded carrying case 345 x 265 x100mm
BE CAREFUL: Ninja blades have been elaborated to fit on the Ninja knife.
They should not be used with other knives.
Reference: ENJ147
The Equalizer Ninja and Ninja GT are revolutionary auto glass removal tools that allow you to remove any glass fast and effortlessly. They have the look and feel of a cold knife, but cut with the power of 22,000 cutting strokes per minute. Here is how they work: the blade moves back and forth at22,000 strokes per minute. As you pull the Equalizer Ninja...
Reference: ENT840
cutting blade. lenght: 19mm- 56 x 30 x 19 mm 40 gBE CAREFUL: Ninja blades have been elaborated to fit on the Ninja knife. They should not be used with other knives.
Reference: ENO841
Cutting blade. Length: 25mm - 60 x 30 x 25 mm 45 gBE CAREFUL: Ninja blades have been elaborated to fit on the Ninja knife. They should not be used with other knives.
Reference: ENL842
Cutting blade. Length: 38mm- 55 x 30 x 38 mm 50 gBE CAREFUL: Ninja blades have been elaborated to fit on the Ninja knife.They should not be usedwith other knives.
Reference: ESB1308
Serrated blades and sheathsEQUALIZER® blade 200 mmThese patented blades are made of spring steel and specifically designed for our tools. They are sharpened with a unique double-serration method. Each serration is also serrated. this sharpening method gives our EQUALIZER® blades a smoother and faster cutting action than ever before. These blades will fit...
Reference: ENT840
cutting blade. lenght: 19mm- 56 x 30 x 19 mm 40 gBE CAREFUL: Ninja blades have been elaborated to fit on the Ninja knife. They should not be used with other knives.
Reference: ESB1312
EQUALIZER® blade 300mm.Serrated blades and sheathsThese patented blades are made of spring steel and specifically designed for our tools. They are sharpened with a unique double-serration method. Each serration is also serrated. this sharpening method gives our EQUALIZER® blades a smoother and faster cutting action than ever before. These blades will fit...
Reference: ENL842
Cutting blade. Length: 38mm- 55 x 30 x 38 mm 50 gBE CAREFUL: Ninja blades have been elaborated to fit on the Ninja knife.They should not be usedwith other knives.
Reference: EES812
EQUALIZER® sheath 300mm The sheath is the unique, patented idea that makes the EQUALIZER® line of tools work. The sheath is a protective sleeve that surrounds the blade will not damage the dash or garnish mouldings. Sheaths are available in the three sizes: 10,20 and 30cm. The smallest one is generally used to surround small side windows. The middle size...
Reference: EES808
EQUALIZER® sheath 200mm The sheath is the unique, patented idea that makes the EQUALIZER® line of tools work. The sheath is a protective sleeve that surrounds the blade will not damage the dash or garnish mouldings. Sheaths are available in the three sizes: 10,20 and 30cm. The smallest one is generally used to surround small side windows. The middle size...
Reference: AEB403
The Excalibur® is a compact, lightweight, air-powered version of the Equlizer® . Theoratically, it works in the same way as the Equlizer® .However, since it is compact and lightweight,it is even handier, especially in areas that are hard to reach andwhen you work above the level of the head.Thestiking rate is 30% higher. In this way, vibrations are...
Reference: EEB797
EQUALIZER® blades and sheathsEQUALIZER® blade 300 mmThe blade is made of unbreakable mild steel.In case the blade bends,use pliers to straighten it up. Use a bech grinder, a strip sander, a file or a whetstone. You do not need to remove the blade to sharpen it. Our blades are made of specific material.Their round edges prevent them from being bent inside...
Reference: ENO841
Cutting blade. Length: 25mm - 60 x 30 x 25 mm 45 gBE CAREFUL: Ninja blades have been elaborated to fit on the Ninja knife. They should not be used with other knives.
Reference: EES804
EQUALIZER® sheath 100mm The sheath is the unique, patented idea that makes the EQUALIZER® line of tools work. The sheath is a protective sleeve that surrounds the blade will not damage the dash or garnish mouldings. Sheaths are available in the three sizes: 10,20 and 30cm. The smallest one is generally used to surround small side windows. The middle size...
Reference: EEB795
EQUALIZER® blades and sheathsEQUALIZER® blade 200 mmThe blade is made of unbreakable mild steel.In case the blade bends,use pliers to straighten it up. Use a bech grinder, a strip sander, a file or a whetstone. You do not need to remove the blade to sharpen it. Our blades are made of specific material.Their round edges prevent them from being bent inside...
Reference: EGK150
Air-powered cold knifeThe Equalizer Ninja and Ninja GT are revolutionary auto glass removal tools that allow you to remove any glass fast and effortlessly. They have the look and feel of a cold knife, but cut with the power of 22,000 cutting strokes per minute. Here is how they work: the blade moves back and forth at 22,000 strokes per minute. As you pull...
Reference: ESB1304
EQUALIZER® blade 100mm.Serrated blades and sheathsThese patented blades are made of spring steel and specifically designed for our tools. They are sharpened with a unique double-serration method. Each serration is also serrated. this sharpening method gives our EQUALIZER® blades a smoother and faster cutting action than ever before. These blades will fit...
Reference: AEB405
The Excalibur® is a compact, lightweight, air-powered version of the Equlizer® . Theoratically, it works in the same way as the Equlizer® .However, since it is compact and lightweight,it is even handier, especially in areas that are hard to reach andwhen you work above the level of the head.Thestiking rate is 30% higher. In this way, vibrations are...
Reference: EEB793
EQUALIZER® blades and sheathsEQUALIZER® blade 100mmThe blade is made of unbreakable mild steel.In case the blade bends,use pliers to straighten it up. Use a bech grinder, a strip sander, a file or a whetstone. You do not need to remove the blade to sharpen it. Our blades are made of specific material.Their round edges prevent them from being bent inside...
The Equalizer Ninja and Ninja GT are revolutionary auto glass removal tools that allow you to remove any glass fast and effortlessly. They have the look and feel of a cold knife, but cut with the power of 22,000 cutting strokes per minute. Here is how they work: the blade moves back and forth at
22,000 strokes per minute. As you pull the Equalizer Ninja forward, it is retracting and then thrusting
into the urethane at an astonishing rate of 367 times a second. Jobs that took several minutes now take
only seconds with now strain on your body. A unique feature is Ninja GT’s ability to cut under hoods,
trunk lids, or anything that hangs over the glass and obstructs your ability to cut. When you encounter
a hood, visor or trunk lid, you can position the blade around so it sits at a 90° angle. This makes the
tool short enough to go under these areas.
- 365 x 275 x 125 mm 2.110 g
The kit contains :
REF-ENJ147 - 1 Special air-powered knife, air consumption: 115l/min, air coupling (raccord dair) R1/4"
REF-ENT840 - 2 Cutting blade. Length: 19mm
REF-ENO841 - 3 Cutting blade. Length: 25mm
REF-ENL842 - 2 Cutting blade. Length: 38mm
REF-ENK148C - Padded carrying case 345 x 265 x100mm
BE CAREFUL: Ninja blades have been elaborated to fit on the Ninja knife.
They should not be used with other knives.
