• VBSA awarded ECOVADIS label

  • Banner

LED Light lamp ULTRA FAST CURING

1048
From 05.04.2024, our 1048 UV lamps will be equipped with a USB-C socket, so they will be supplied with a reinforced USB-C cable ref. 1048-CABLEUSBC and a charger ref. 818-220V.
Please log in to your account to display prices
Quantity

Accessoires indispensables

UV LAMP - 12V - Special Resin Curing
UV LAMP - 12V - Special Resin Curing
€0.00
Description

Our new polymerisation lamp will save you a lot of time.... A whole lot of time!

The resin will polymerise in just 50 seconds!

Normally, with a traditional UV lamp, it takes 10 to 15 minutes to cure!

But that's all over now!

Thanks to our new REF-1048 LED UV lamp, it only takes 50 seconds to cure!

50 seconds instead of 10 to 15 minutes for a repair.

Your time saving for 50 repairs, for example, will be more than 9h.

Product Details
1048
You might also like

Reference: 943

Brand: REPARBRISE

windshield repair pit finish resin

High-strength pit finish resin specially developed for repairs to damaged glass surfaces. With 1 pipette you can repair more than 60 items. VERY IMPORTANT FOR YOUR SAFETY: Our REPARBRISE resins comply with the AFNOR NF n°X50210 standard; on 01/01/87 and 30/09/2008 we passed the UTAC TEST European regulation n°43. Our REPARBRISE resins comply with the...

Reference: LR136

Brand: REPAREGLASS

Standard REPAREGLASS® injection resin LR136

Injection resin for repairing windshield impacts is an advanced solution, designed to provide a high-quality repair for impacts and cracks in your car windows. Thanks to its high-strength formula, this resin not only guarantees a restoration of the windshield's transparency, but also a reinforcement of its solidity, in order to extend its lifespan. High...

Reference: 934

Brand: REPARBRISE

Special carbide drill

Discover our carbide drill bit, specially designed for fast and precise drilling of the impact point when repairing star-shaped or bubble-shaped impacts. Its highly resistant design ensures clean, chip-free work for optimal preparation before resin injection.

Reference: 970

Brand: REPARBRISE

Rigid plastic / mylar squares for curing resin - Pack of 10

Our special rigid plastic sheets, also known as mylar sheets, are specially designed for the polymerisation of the resin on the surface for impact repair. 1. Optimal solution for resin polymerisation High-quality Mylar sheets: These rigid plastic sheets are designed to facilitate and optimise the polymerisation of finishing resin on windscreen impacts,...

Reference: 948

Special windshield repair scraper blades - Pack of 5

These scraping blades are specially designed to remove excess finishing resin after a windscreen repair. 1. Precise, scratch-free scraping Impeccable finish: These scraping blades are specially designed to effectively remove excess finishing resin after a windscreen repair. They enable precise scraping without damaging or scratching the repaired surface,...

Reference: 958

Brand: REPARBRISE

Suction cup gel for adhesion to glazing

Our suction cup gel is specially designed to strengthen the adhesion of suction cups on windshields and car windows. 1. Strengthening the adhesion of suction cups Stronger adhesion: This suction cup gel is specially formulated to improve the adhesion of suction cups used in windshield and car window repairs. It ensures a strong and stable hold, even on...

Reference: 945

Brand: REPARBRISE

Plexiglas mirror

The REPARBRISE 945 mirror, made of high-quality plexiglass, is designed to monitor the progress of windshield impact repairs in real time. Placed inside the vehicle, it provides a clear and continuous view of the impact throughout the repair process, ensuring precise and careful work.

Reference: 1046

Brand: REPARBRISE

UV LAMP - 12V - Special Resin Curing

12V UV lamp with timer To connect this lamp to the 230V mains, simply adapt our mini transformer Ref.512. Please note: the maximum amperage of the replacement fuses is 2A. It is important to replace the UV neon (ref.931) at a frequency defined in accordance with standard NF R61-980, i.e: Continuous operation for 15 hours or approximately 90 repairs....

Reference: LR1-2OZ

Brand: REPAREGLASS

REPAREGLASS ® Standard windshield finishing resin

The finishing resin for repairing impacts on windshields is an ideal solution for restoring the transparency and strength of your damaged automotive glass. This high-strength resin allows for effective impact repair, while maintaining a clear and solid finish. It is designed to provide a long-lasting repair, capable of withstanding the stresses of driving...

Reference: KIT-TERMINATOR-LED

Brand: TERMINATOR

TERMINATOR: AUTOMATIC WINDSHIELD REPAIR SYSTEM WITH LED LIGHT LAMP

VBSA REVOLUTIONISES WINDSHIELD REPAIR  AUTOMATED WINDSHELD REPAIR SYSTEM WITH LED LAMP DRIES IN 50 SECONDS! The TERMINATOR motorised windscreen repair kit is an injection process with a motor. It is so intuitive that even someone who doesn't repair windscreens on a daily basis is able to carry out perfect repairs. The operator no longer has to stand in...

Reference: 818-220V

USB 3.0 adapter charger - 5V, 2Ah

Compact and powerful USB 3.0 power adapter, ideal for safely charging your devices. Compatible with our 1048-CABLEUSB cable, this adapter is perfectly suited for powering: The 818 windshield heater The 1048 UV LED lamp The LAMPE-3 The LAMPE-F headlamp

Reference: LUNETTE1048

UV protection glasses

When repairing windscreens, it is essential to wear UV protection goggles, especially when using UV LED lamps, such as our UV lamp 1048. These goggles provide optimal protection against ultraviolet rays, thus reducing the risks to the eyes and guaranteeing maximum safety. Characteristics: - Anti-UV filtration: Effective protection against UV exposure -...

Reference: 818-12V

12V cigar lighter charger

12V cigar lighter charger compatible with charging cable 1048-CABLEUSB. Works with our UV-1048 lamp, our 818 windshield heater, our LAMPE-3 and our LAMPE-F headlamp.

Reference: 1048-CABLEUSB

USB-C charger cable

This USB-C charging cable is compatible with our 818-220V and 818-12V chargers. It is specially designed to provide reliable and fast power to your repair equipment. It can be used with the following devices: 818 Windshield Heater 1048 LED UV Lamp LAMPE-3 LAMPE-F Headlamp

16 other products in the same category:

Reference: 1046-N185

Brand: REPARBRISE

2nde Vie - Old generation UV lamp -12V- Special resin polymerisation - N185

12V UV lamp with timer. To connect this lamp to a 230V mains supply, you just need to adapt our mini transformer Ref.512. General functioning: N/A This lamp has numerous scratches and signs of wear, as shown in the photos - 1 single item available SECOND LIFE guarantee: 6 months Caution: the maximum amperage of the replacement fuses is 2A. It is important...

Reference: 4510-N239

Brand: REPARBRISE

Long UV lamp 220V for polymerization of slot resin - 2nd life

In good condition Cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Our 220V long UV lamp is a practical tool for curing crack resin to repair cracks in your windshield. (less than 5 minutes) It's highly portable, with sufficient power to ensure the resin cures quickly and effectively. Lightweight and...

Reference: 1046-N80

Brand: REPARBRISE

2nde Vie - New generation UV lamp -12V- Special resin polymerisation - N80

12V UV lamp with timer. To connect this lamp to a 230V mains supply, you just need to adapt our mini transformer Ref.512. General functioning: RAS Only aesthetic defects shown in the photos appear - 1 single item available SECOND LIFE guarantee: 6 months Caution: the maximum amperage of the replacement fuses is 2A. It is important to replace the UV neon...

Reference: 1048-CABLEUSB

USB-C charger cable

This USB-C charging cable is compatible with our 818-220V and 818-12V chargers. It is specially designed to provide reliable and fast power to your repair equipment. It can be used with the following devices: 818 Windshield Heater 1048 LED UV Lamp LAMPE-3 LAMPE-F Headlamp

Reference: 4510NEW

Brand: REPARBRISE

220V long UV lamp for crack resin curing

Our 220V long UV lamp is a practical tool for curing crack resin to repair cracks in your windshield. (less than 5 minutes) It's highly portable, with sufficient power to ensure the resin cures quickly and effectively. Lightweight and ergonomic, it makes it easy to dry the 634 crack resin.

Reference: 818

Windshield heater for impact repair

The WINDSHIELD HEATER warms the repair area, usb powered, supplied with adapter + 5 thermometers Ref. 961 12v cigarette lighter and 220v mains, 2.5m cable, ideal for impact repairs, red or black depending on availability.

Reference: 1046-N77

Brand: REPARBRISE

2nde Vie - Old generation UV lamp -12V- Special resin polymerisation - N77

12V UV lamp with timer. To connect this lamp to a 230V mains supply, you just need to adapt our mini transformer Ref.512. General functioning: N/A This lamp has numerous scratches and signs of wear, as shown in the photos - 1 single item available SECOND LIFE guarantee: 6 months Caution: the maximum amperage of the replacement fuses is 2A. It is important...

Reference: 1046-N81

Brand: REPARBRISE

2nde Vie - Old generation UV lamp -12V- Special resin polymerisation - N81

12V UV lamp with timer. To connect this lamp to a 230V mains supply, you just need to adapt our mini transformer Ref.512. General functioning: N/A This lamp has numerous scratches and signs of wear, as shown in the photos - 1 single item available SECOND LIFE guarantee: 6 months Caution: the maximum amperage of the replacement fuses is 2A. It is important...

Reference: 1046

Brand: REPARBRISE

UV LAMP - 12V - Special Resin Curing

12V UV lamp with timer To connect this lamp to the 230V mains, simply adapt our mini transformer Ref.512. Please note: the maximum amperage of the replacement fuses is 2A. It is important to replace the UV neon (ref.931) at a frequency defined in accordance with standard NF R61-980, i.e: Continuous operation for 15 hours or approximately 90 repairs....

Reference: 818-220V

USB 3.0 adapter charger - 5V, 2Ah

Compact and powerful USB 3.0 power adapter, ideal for safely charging your devices. Compatible with our 1048-CABLEUSB cable, this adapter is perfectly suited for powering: The 818 windshield heater The 1048 UV LED lamp The LAMPE-3 The LAMPE-F headlamp

Reference: 1046-N6

Brand: REPARBRISE

2nde Vie - Old generation UV lamp -12V- Special resin polymerisation - N6

12V UV lamp with timer. To connect this lamp to a 230V mains supply, you just need to adapt our mini transformer Ref.512. General functioning: N/A This lamp has numerous scratches and signs of wear, as shown in the photos - 1 single item available SECOND LIFE guarantee: 6 months Caution: the maximum amperage of the replacement fuses is 2A. It is important...

Reference: 818-12V

12V cigar lighter charger

12V cigar lighter charger compatible with charging cable 1048-CABLEUSB. Works with our UV-1048 lamp, our 818 windshield heater, our LAMPE-3 and our LAMPE-F headlamp.

Reference: 1046-N7

Brand: REPARBRISE

2nde Vie - New generation UV lamp -12V- Special resin polymerisation - N7

12V UV lamp with timer. To connect this lamp to a 230V mains supply, you just need to adapt our mini transformer Ref.512. General functioning: RAS Only aesthetic defects shown in the photos appear - 1 single item available SECOND LIFE guarantee: 6 months Caution: the maximum amperage of the replacement fuses is 2A. It is important to replace the UV neon...

Reference: UVB-150-T

Battery-powered UV lamp for resin curing

Our battery-powered UV lamp is a practical tool for curing Windshield Repair Resin. It's highly portable, with sufficient power to ensure that the resin cures quickly and efficiently. The lamp is lightweight and ergonomic, making it easy to cure the resin. Supplied with 4 AA batteries

Reference: 1046-N2

Brand: REPARBRISE

2nde Vie - Old generation UV lamp -12V- Special resin polymerisation - N2

12V UV lamp with timer. To connect this lamp to a 230V mains supply, you just need to adapt our mini transformer Ref.512. General functioning: RAS Only aesthetic defects shown in the photos appear - 1 single item available SECOND LIFE guarantee: 6 months Caution: the maximum amperage of the replacement fuses is 2A. It is important to replace the UV neon...

Reference: 1048-N178

Brand: REPARBRISE

LED Light lamp ULTRA FAST CURING - Second Life - N178

General operation: RAS Very good condition - 1 Only one available Second Life warranty: 6 months Our new polymerisation lamp will save you a lot of time.... A whole lot of time! The resin will polymerise in just 50 seconds! Normally, with a traditional UV lamp, it takes 10 to 15 minutes to cure! But that's all over now! Thanks to our new REF-1048 LED UV...