Standard injection resin LR919

Reference: LR943

Brand: REPAREGLASS

Standard pit finish resin LR943

Discover our LR943 finishing resin for repairing windshield impacts, a solution for restoring the transparency and strength of your car's glazing. (+/- 60 finishes) 1ML

Reference: 970

Brand: REPARBRISE

Rigid plastic / mylar squares for curing resin - Pack of 10

Our special rigid plastic squares, also known as mylar squares, are specially designed to polymerise the resin on the surface for impact repair. Lay the mylar sheet over the finishing resin and then use a UV lamp to polymerise the impact repair on the windshield. Bag of 10 squares.

Reference: 645

Brand: REPARBRISE

12V carbide drill for impact drilling

12V carbide drill supplied with integrated chuck lock, for drilling the impact point on your windshield before injecting the resin. Use with our 934, 4509w and 701 carbide drills. This drill can also be used with a felt for polishing the impact after repair. 4M cable extension

Reference: 959

Brand: REPARBRISE

Carbide-tip pen for windschield impact

Carbide-tipped pen, used to remove surface impurities on the impact before repairing it.

Reference: 945

Brand: REPARBRISE

Square mirror REPARBRISE (Plexiglass)

Reparbrise 945 Plexiglas square mirror for repairing windscreen impacts. This mirror allows you to view the impact throughout the repair process. Dimensions: 9.5cm x 9.5cm

Reference: 51

Brand: REPAREGLASS

51 REPAREGLASS® injection bridge for windshield repairs

Our 51 REPAREGLASS® injection bridge is a support for injecting windshield repair resin and is used with our 3200 injector.

Reference: 3200

Brand: REPARBRISE

REPARBRISE Injector: Cylinder + piston for injection of windshield repair resin

REPAIR injector composed of a high quality cylinder + piston. Composed of 5 lips which allow an additional depression and a faster repair. Adapts to our injection bridges ref.51 and 9620. To avoid any leaks due to seal wear, we recommend that you also order the interchangeable end caps ref 3202 when purchasing the injector.

Reference: 818

Windshield heater for impact repair

The WINDSHIELD HEATER warms the repair area, usb powered, supplied with adapter + 5 thermometers Ref. 961 12v cigarette lighter and 220v mains, 2.5m cable, ideal for impact repairs, red or black depending on availability.

Reference: SB-880

Impact-resistant safety goggles

Safety glasses It is absolutely essential to wear protective eyewear when working with glass. Our impact-resistant goggles can be conveniently worn over most glasses. The avant-garde shape of our goggles protects your eyes laterally and frontally.

Reference: 438

Brand: REPARBRISE

Miniature windshield on display - Size 250x110 mm

Mini windshield on display 250 x 110 mm, we have intentionally created a space in the centre so that you can add your logo. This mini windshield allows the customer to see the result of the repair after an impact on the windshield. We recommend placing it at customer reception.

Reference: 439

Brand: REPAREGLASS

Circular windshield impact protection stickers (customisable) - 100 pack

Round sticker Ø 3cm pack of 100 to personalise For impacted windshield, your customer has an impact and you can't repair it immediately. Protect the impact with our protective sticker for a few days, to avoid impurities in the windscreen. The round self-adhesive patch protects the impact. It protects it from moisture and impurities before the repair is...

Reference: CC-1058

NITRILE elastic and stretch gloves (NON-POINTED)

Raw material: Nitrile rubber. Does not contain natural rubberized latex. The components used to manufacture gloves may cause allergic reactions in some users. Good quality nitrile gloves providing an excellent biological barrier. Store in a cool, dry place, avoiding excessive heat (40°C, 104°F). Open box must be protected from direct sunlight and UV...

Reference: GAB-VBSA

Brand: REPARBRISE

Field of vision model to define windshield repair areas

REPAIR ZONE : Zone 2 : In this zone, repair is not authorised. Zone 1 : Where possible, repairs are authorised.. Using our field of vision template, you can easily determine the zones where repairs are possible or impossible. Refer to the AFNOR NF R19-601-1 standard, which sets out the different types of repair and the support processes required to...

Reference: POSTER-RPB

Manual windshield impact repair process poster - 50x70cm

Windshield repair posterPlease do not hesitate to ask for some poster when you proceed to ordering Available for export only with a product order. No delivery possible on its own

Reference: LP10

Magnifying glass (15x zoom) for visual impact on windscreen

Plastic magnifying glass (15x zoom) with transparent base. Excellent tool for identifying the type of impact, but also for viewing the impurities contained within it.

Reference: 1414-V2

Brand: REPARBRISE

Old windshield impact cleaning kit

Reference: BLACKNIT

Black protective nitrile gloves (powder-free), thick, special for various repairs

Give your hands optimum protection with our powder-free black nitrile gloves, designed for professional, all-purpose use. Recommendations for use : Store in a cool, dry place, away from excessive heat (maximum temperature: 40°C). Open tin to be protected from UV rays and direct exposure to sunlight. Packaging: Sold in boxes of 100 pieces, ideal for...