Reference: JCS452

Compact C-clip remover

Compact C-clip removerC-clip removers are an item that every technician has inhis toolbox, but those C-clips removers will not alwaysfit into the tight spots and compound curves on somevehicles. The Compact C-clips remover has a flat designthat will let you use it from all sides. This handy tool isdefinitely one that no technician should be without.REF....

Reference: JM5

Foam installation tape

Reference: JMFE

Expanding foam adhesive seal

Expanding foam adhesivejoint for soundproofingbetween the dashboard andthe windscreen.20 x 20 mm • Roll of 2 m

Reference: JPB391

Plastic razor blades

Plastic razor bladesThese plastic razor blades are suitable to remove stickers andlabels from glass surfaces.As the blade is made of plastic it cannot scratch the glass contraryto a metal blade that could.Box of 100 blades

Reference: JPU10

Soft universal mouldings • 10 mm x 22,8 m

Soft universal mouldings Strong adhesion. Very flexible ruber. Easy removal of theliner. REF-JPU10• 10 mm x 22,8 m PLEASE ASK OUR KEYCHAIN SAMPLE WHICH WILL ALLOWS TO DISCOVEROUR UNIVERSAL MOULDING RANGE.Supplied with a detail list with many exemple of cars that cover.)

Reference: JPU5

Soft universal mouldings • 5 mm x 22,8 m

Soft universal mouldings Strong adhesion. Very flexible ruber. Easy removal of theliner. REF-JPU5• 5 mm x 22,8 m PLEASE ASK OUR KEYCHAIN SAMPLE WHICH WILL ALLOWS TO DISCOVEROUR UNIVERSAL MOULDING RANGE.Supplied with a detail list with many exemple of cars that cover.)

Reference: JPU7

Soft universal mouldings • 7 mm x 22,8 m

Soft universal mouldings Strong adhesion. Very flexible ruber. Easy removal of theliner. REF-JPU7• 7 mm x 22,8 m PLEASE ASK OUR KEYCHAIN SAMPLE WHICH WILL ALLOWS TO DISCOVEROUR UNIVERSAL MOULDING RANGE.Supplied with a detail list with many exemple of cars that cover.)

Reference: JPU7M

Soft universal mouldings • 7 mm x 22,8 m

Soft universal mouldings Strong adhesion. Very flexible ruber. Easy removal of theliner. REF-JPU7M• 7 mm x 22,8 m PLEASE ASK OUR KEYCHAIN SAMPLE WHICH WILL ALLOWS TO DISCOVEROUR UNIVERSAL MOULDING RANGE.Supplied with a detail list with many exemple of cars that cover.)

Reference: JPU8

Soft universal mouldings • 8 mm x 22,8 m

Soft universal mouldings Strong adhesion. Very flexible ruber. Easy removal of theliner. REF-JPU8• 8 mm x 22,8 m PLEASE ASK OUR KEYCHAIN SAMPLE WHICH WILL ALLOWS TO DISCOVEROUR UNIVERSAL MOULDING RANGE.Supplied with a detail list with many exemple of cars that cover.)

Reference: JPU9

Soft universal mouldings • 9.5 mm x 22,8 m

Soft universal mouldings Strong adhesion. Very flexible ruber. Easy removal of theliner. REF-JPU9• 9.5 mm x 22,8 m PLEASE ASK OUR KEYCHAIN SAMPLE WHICH WILL ALLOWS TO DISCOVEROUR UNIVERSAL MOULDING RANGE.Supplied with a detail list with many exemple of cars that cover.)

Reference: JU100

Universal mouldings • 7 mm x 22,8 m

Universal mouldingsExcellent forming and adhesion. Remain flexible even withlow temperatures. Butyl adhesive- No cracking, no weakness, no distorsion REF-JU100• 7 mm x 22,8 mFor T4 PLEASE ASK OUR KEYCHAIN SAMPLE WHICH WILL ALLOWS TO DISCOVEROUR UNIVERSAL MOULDING RANGE.Supplied with a detail list with many exemple of cars that cover.)

Reference: JU101

Universal mouldings • 9.5 mm x 22,8 m

Universal mouldingsExcellent forming and adhesion. Remain flexible even withlow temperatures. Butyl adhesive- No cracking, no weakness, no distorsion REF-JU101• 9.5 mm x 22,8 mFor T4 PLEASE ASK OUR KEYCHAIN SAMPLE WHICH WILL ALLOWS TO DISCOVEROUR UNIVERSAL MOULDING RANGE..Supplied with a detail list with many exemple of cars that cover.)

Reference: JU105

Universal mouldings • 16 mm x 22,8 m

Universal mouldingsExcellent forming and adhesion. Remain flexible even withlow temperatures. Butyl adhesive- No cracking, no weakness, no distorsion REF-JU105• 16 mm x 22,8 mFor T4 PLEASE ASK OUR KEYCHAIN SAMPLE WHICH WILL ALLOWS TO DISCOVEROUR UNIVERSAL MOULDING RANGE.Supplied with a detail list with many exemple of cars that cover.)

Reference: JU107

Universal mouldings 19 mm x 22,8 m

Universal mouldingsExcellent forming and adhesion. Remain flexible even withlow temperatures. Butyl adhesive- No cracking, no weakness, no distorsion REF-JU107- 19 mm x 22,8 mFor T4 PLEASE ASK OUR KEYCHAIN SAMPLE WHICH WILL ALLOWS TO DISCOVER OUR UNIVERSAL MOULDING RANGE.Supplied with a detail list with many exemple of cars that cover.)

Reference: JU108

Universal mouldings • 25 mm x 22,8 m

Universal mouldingsExcellent forming and adhesion. Remain flexible even withlow temperatures. Butyl adhesive- No cracking, no weakness, no distorsion REF-JU108• 25 mm x 22,8 mFor T4 PLEASE ASK OUR KEYCHAIN SAMPLE WHICH WILL ALLOWS TO DISCOVEROUR UNIVERSAL MOULDING RANGE.Supplied with a detail list with many exemple of cars that cover.)

Reference: JU109

Universal mouldings • 31 mm x 22,8 m

Universal mouldingsExcellent forming and adhesion. Remain flexible even withlow temperatures. Butyl adhesive- No cracking, no weakness, no distorsion REF-JU109• 31 mm x 22,8 mFor T4 PLEASE ASK OUR KEYCHAIN SAMPLE WHICH WILL ALLOWS TO DISCOVEROUR UNIVERSAL MOULDING RANGE.Supplied with a detail list with many exemple of cars that cover.)

Reference: KIT-NETGUN

Barrel Cleaning Kit

Reference: KIT-NETGUN

Barrel Cleaning Kit

This kit allows to clean the residus of urethane that are sticks inside the caulking gun barrel.Barrel: Ref. NETGUN-TUBEWipe (x10): Ref. NETGUN-TISSUExpanded dim.: 45 x 45cmCleaner: Ref. NETGUN-CLEAN

Reference: KIT-NETGUN

Barrel Cleaning Kit

Reference: KIT-NETGUN

Barrel Cleaning Kit

Reference: KIT-NETGUN

Barrel Cleaning Kit

Reference: NSE-B

Professional extendable lashing bars for light commercial vehicles.

Reference: L110

Dispenser for masking paper

Reference: L2

Olfa® knife

Olfa®knife This knife is made of high impact plastic, has a stainless steel blade housing and a positive locking thumb wheel so that you can set the blade at any length. The back of the knife features a rubber grip that lets the knife rest comfortably in your hand and keeps it from slipping. The famous model. - 146 x 40 x 20 mm - 110 g

Reference: LB-780

Inflator set

Reference: LB10

Rigid not segmented blades for l2 and xl2 knives

Rigid not segmented blades, for L2 and XL2 knives Package of 10 pieces - 110 x 18 x 0.5 mm - 65 g

Reference: LB10S

Rigid segmented blades for L2 and XL2 knives

Rigid segmented blades, for L2 and XL2 knivespackage of 10 pieces- 110 x 18 x 0.5 mm - 86 g

Reference: LFA-402

Flexlight bulb

flexlight mini torch with flexible shaftA screw has been lost? There is a leak in the engine compartment? A connector is hidden under the dash? This mini torch with flexible shaft will give you the needed light-in dark or hidden places. It can even become one of the most useful tools to you. Needs two LR6/AM3/AA batteries (delivered without batteries ).-...

Reference: LS1134

Loop wire starter

REF. LS1134 - Loop wire starterAn innovative, patent-pending idea for those vehicles when you insert the wire starterand there is not enough room to see the hole of the wire starter. Also, works great forstarting line / cord that can be difficult to secure on a conventional wire starter.Comes with 5 extra wire loops.

Reference: LT-415-1

5 adaptable eylets

5 replacement eylets

Reference: LU1271

Forearm protection gloves

When a technician is working inside a door to dismantle or reassemble a window, it's essential to protect his forearms. The metal fittings and parts inside can be dangerous (sharp). These gloves are made from double-layer Kevlar for extra protection.

Reference: DESTOCK-MBV-SHE

Life hammer for breaking glass and cutting belts

REF. MBV-SHELife hammer 2 in 1This life hammer allows to break the tempered windows, its ceramic head will break the windowautomatically. Easy to use not only for adults but also for children by a secure way.This life hammer is used also to release persons from the security belt in case of automotiveaccident, thanks to its integrated blade

Reference: MK201

Lockout tool set

REF. MK-201Lockout tool setIt can easily happen that you lock yourself out, while working on customer cars. This setallows to solve this situation. Open the car door without damaging the paint, moulds andliners.. The tool kit is supplied with instruction manual.Careful, this set will not work on recent vehicles with electronically controlled locking systems

Reference: MRC1105-R3

Hook for ROLL-N-CUT kit

Crochet pour kit ROLL -N -CUT

Reference: MRC1105-R4

Ratchet for ROLL-N-CUT kit

1 Ratchet For ROLL-N-CUT kit

Reference: MRL6

Mini scrapers

This scraper can be carried in the pocket - no risk of injury.The replacement of the blade is easy and secure. When not in use, the blade is simply flipped so as to avoid any injury. When you want to use the scraper, pull the closing device, flip the blade and your scraper is ready to use!1 Package of 6 pieces.- 50 x 44 x 38 mm - 45 g

Reference: MS-180

Installation stick

Reference: MS-182

Installation stick with one round end shape and one flat end shape

Reference: MSP-211

BOX EXTRACTOR

Arm wiper pullers kit If you remove a bolted on windshield wiper a few months after the vehicle was builtthen it is usually not difficult to remove, but try removing the wiper arm two or threeyears after it was built. It can be almost impossible because manufacturers use onetype of metal on the wiper arm and a different type of metal on the wiper post. If...

Reference: MTS-068

Hook and pick set

Hook and pick setThis set of mini hooks is very helpful to remove joints and coverings while avoiding any possible damage.This practical set contains hooks in different shapes and a pick. The length of these tools is only 13mm! - 127 x 25 x 25 mm - 280 g

Reference: NET-VENT

Rubber cleaner

Rubber cleanerCleans and restore the appearance of new to all rubbers such as gaskets, rubberized hubcaps, suction cups, etc.Please note that the product is not suitable for certain plastics and paints.

Reference: NMT-448

Mechanical pick up

Mechanical pick up The use of telescopic magnet could be sometimes impossible to use because of non ferrous items. It is times like these when you need our Mechanical Pick-Up. It is designed with steel fingers that are spring-loaded that will grip an item up to 2,5 cm in diameter.

Reference: NSE-MUR6

Wall glass racks with 6 compartments

Wall glass racks with 6 compartmentsL: 680 mm x H: 560 mm2 cm between each tubesWeight : 9,8 KgLoading capacity : 96 KgDimensions L: 680 mm x H: 560 mm2 cm between each tubesDelivered without setting screw set

Reference: NSE-825

Telescopic Windshields rack - 5 compartments (optional wheels)

Telescopic Windshields rack 5 compartments. L: 800 mm x W: 540 mm x H: 635 mm Maximum height: 970 mm Weight: 22 kg Load capacity: 200 kg

Reference: NSE-826

Telescopic Windshields rack - 9 compartments (optional wheels)

9-compartment telescopic windshield rack. H: 800 mm x W: 845 mm x H: 635 mm Maximum height: 970 mm Weight: 32.80 kg Load capacity: 200 kg

Reference: OL30

Olfa®knife, with one snap-off blade of 9mm

Olfa® knife, with one snap-off blade of 9 mm.Standard knives with a wide 18 mm blade are generally too wide to accomplish fine jobs. With its retractable blade of 9 mm wide, this knife allows a fine cutting with one hand.- 130 x 16 x 10 mm - 36 g

Reference: OPB

Windshield stand

Windshield standWindshield stand with 4 articulated rubber plates for thepreparing and installing of bonded windows. As it is used on bench vices, it is very practical and no effort is needed to move it.

Reference: OUV-CART

Urethane tube opener

Reference: P-04200101

Rubber foot

Rubber foot

Reference: PAIG-200

Wire gripping handles (corkscrew shape)

Wire gripping handlesIdeal solution to work rapidly and without problem. Feed the wire through the hole in the wedge shaft (fig A), loop it through the hole at the top of the shaft (fig B) and then bring it back into the large plastic handle. By pressing the wedge back into the handle, the wire is held in place (fig C). To shorten the wire, press down on...

Reference: PAST-V5315

White disk for saussage use - For AKP-060

White disk for saussage use - For REF. AKP-060

Reference: PAST-V5315

White disk for saussage use - For V53 and V54

White disk for saussage use - For V53 and V54

Reference: PASTILLE-NOIR

Blue disk to adapt saussages from cartridges

REF-PASTILLEBLEUBlue disk to adapt saussages from cartridges

Reference: PASTILLE-ROUGE

Blue disk to adapt saussages from cartridges

Blue disk to adapt saussages from cartridges

Reference: PEZ-120

Brand: REPAREGLASS

Anti-skid roof/hood liner

The car's roof offers a convenient place to deposit tools, screws and other small assembly materials. To avoid damaging the paintwork on the roof, you'll need to use our protective canvas. It's made of vinyl and acts as a soft, non-slip cushion between the vehicle's roof and your tools.

Reference: PH-1355

Spatula curved to remove the clips

Curved Door Upholstery Remover For removing plastic fasteners in confined places. It is the same upholstery remover as the one shown above, but it is instended for use on the front part of the door where the door jam will often interfere with the removal of the door panel. Place the notch in the tool over the fastener and pry the fastener out the hole. It...

Reference: PLAN-BOIS

Working platform in wood (beech) for workshop workbench

Option N°2 for workshop workbench: Discover our workbench worktop, made from high-quality beech wood. Ideal for your workshop or garage. L:183 - W: 73cm - Thickness 4cm Sold alone without workbench

Reference: PORTIQUE

2 in 1 Glass cradle for panoramic roof and windshield applications

Reference: PRO-LAV

Special protector part to protect glass cleaner sprayer solution

REF. PRO-LAVMany of the wipers system includes a glass cleaner sprayer solution.The hose is integrated to the arm wiper and runs thanks to its movements. The sprayer couldbe damaged with an arm wiper puller. The tightning nut of the puller has to be located on the specialprotector of the center area of the cleaner sprayer. Untight the bolt which is...

Reference: PS-12

Parer blades 12mm

Parer blades (scraper not include)REF-PS-12 Blade 12 mmThese parer blades are especially good for cleaning the pinchweldfrom excessively applied polyurethane in curves and corners.Thereby the special shape reduces the risk of damaging the paintcompared to standard scraper blades. The blades are suitable for ourscraper tools FSC-300SPECIAL and FSC-350...

Reference: DESTOCK-PS-215

Smoother / remover tool for Silicone / Urethane beads

Smoother / remover tool for Silicone / Urethane beadsThis tool allows to ensure to make a straight bead of silicone or urethane, but not only,it can remove also the old beads. The use of this product is with only one hand.

Reference: PSD12

Parer blades diam.12mm

Parer blades (scraper not include) REF-PSD-12 Blade diameter 12 mThese parer blades are especially good for cleaning the pinchweldfrom excessively applied polyurethane in curves and corners.Thereby the special shape reduces the risk of damaging the paintcompared to standard scraper blades. The blades are suitable for ourscraper tools FSC-300SPECIAL and...

Reference: PSD6

Parer blade 6mm

Parer blades (scraper not include)REF-PSD-6 Blade diameter 6 mmThese parer blades are especially good for cleaning the pinchweldfrom excessively applied polyurethane in curves and corners.Thereby the special shape reduces the risk of damaging the paintcompared to standard scraper blades. The blades are suitable for ourscraper tools FSC-300SPECIAL and...

Reference: PSH-120-VERIBOR

Veribor suction cup pair Ø 120 mm

VERIBOR SUCTION CUP PAIR.REF. PSH-120-VERIBOR• Ø 120 mm : Loading capacity : 80 kg

Reference: PSI-200

Double nylon seat panel cover

Double seat cover One-piece protective cover made from fully cleanable nylon (in washing machine) to cover seats, central controls and vehicle floor. Dimensions: 156 x 244cm

Reference: PSL-150-1

Suction cup deluxe sold individualy (Ø 150 mm)

Suction cup deluxe sold individualy (Ø 150 mm)Easier and safer to attach that common suction lifters with clamp lever technology.The bell shaped rubber pads already adhere onto the glass surface with slight pressing even before pressing the lever.Possibility to pass a belt through. Load capacity for each lifter is 80 kg.

Reference: PSL-150-1VERIBOR

Veribor suction cup Ø 150 mm

VERIBOR SUCTION CUPREF-PSL-150-1VERIBOR• Ø 150 mm : Loading capacity : 80 kg

Reference: PTB

HDPE” standard dashboard protector

Avoids snagging the dashboard with the piano wire during cutting Move everything along the path of your piano wire

Reference: PTB-6030

Dashboard protection

Reference: PTB-L

Set of 4 high-quality dashboard protectors (HDPE)

Set of 4 windscreen and dashboard cut-out protectors (HDPE) - High quality Comprising :  - universal curved protector  - universal straight protector  - small universal curved protector  - small universal straight protector REF. PTB-L

Reference: PTB-LRCUT

Dashboard protection

Reference: PTB-SCUT

Flexible Dashboard protection

Reference: PTO10

High density foam

Reference: PWR-2016-111

Circular disc for MILWAUKEE

Circular disc(Back to PASTILLE-BLEU)

Reference: PWR-2016-115

Aluminum disk forsaussage 400-600ml

Aluminum disk forsaussage 400-600ml(Front of PASTILLE-BLEU)

Reference: PWR-2017

18V Lithium Milwaukee cordless guns

18V Lithium Milwaukee cordless guns -Ejection pressure : 4500Nm -+ 20 % Speed -Upgrade performance up to 40 % compared to old version -Excellent for high viscosity PU -Red-Lithium Ion technology Réf: PWR-2017: Gun for cartridges 310 ml and saussages 400 ml

Reference: PWR-2019

MILWAUKEE Gun for saussages 400 ml + 600 ml, and cartridges 310 ml

18V Lithium Milwaukee cordless guns -Ejection pressure : 4500Nm -+ 20 % Speed -Upgrade performance up to 40 % compared to old version -Excellent for high viscosity PU -Red-Lithium Ion technology REF-PWR-2019: Gun for saussages 400 ml + 600 ml, and cartridges 310 ml

Reference: PWR-5018

Lithium battery 18 V – 2 Ah for MILWAUKEE gun 18V Lithium

Lithium battery 18 V 2 Ah

Reference: PWR-5021

LITHIUM BATTERY 18V - 5.0 AH - MILWAUKEE GUN 18V LITHIUM

Lithium battery 18 V – 5.0 Ah MILWAUKEE gun 18V Lithium 2.5 times more autonomy and up to 20% more power and lifetime multiplied by 2 !

Reference: PWR-5063

Charger for Milwaukee 18V guns

Charger for Milwaukee 18V guns

Reference: PWR-5065

TUBE 310-400ml for MILWAUKEE

REF-PWR-5065Tube 310-400ml (246mm)

Reference: PWR-5066

TUBE 600ml for MILWAUKEE

REF-PWR-5066 Tube 600ml (376mm)

Reference: PWR-5084-18V

Rod for MILWAUKEE 18V

REF-PWR-5084-18VRod for 600ml(475mm)

Reference: PWR-5074

Handle rod for MILWAUKEE14.4V

REF-PWR-5074Handle rod

Reference: PWR-5074-NEW

Handle rod for MILWAUKEE 18 V

Handle rod for MILWAUKEE 18 V

Reference: PWR-5076

Plastic nozzle holder for MILWAUKEE

Plastic nozzle holder for MILWAUKEE

Reference: PWR-5064AC

MILWAUKEE Battery charger 12V

MILWAUKEE Battery charger 12V. Characteristics : Charge the Milwaukee batteries on the road, ideal for the techniciens who have the need to charge their batteries during their travel with the cigarette lighter 12V.Different purposed as windshield bonding, cleaning of the vehicle. Can charge every batteries 12V and 18V from Milwaukee. Sequential charge (...

Reference: QC-050

Charger 7.2V for AKP-050L

Charger 7.2V

Reference: RACCORD1-4FEMELLE

Air plunger for CSG-245RP-CSG-450RP - CSG-400 guns

Air plunger for ref. CSG-245RP-ref. CSG-450RP - ref. CSG-400 guns

Reference: RCH-163

Neoprene covered flexible pull handle

Neoprene covered flexible pull handle.REPAREGLASSUsed with ZDK-395 cold knives.180 x 90 x 23 mm - 100 g

Reference: 5510-3-002

Rod for POWERPUSH

Rod for cartridge 310ml REF-5023-3-130 Rod for saussage 400ml REF-5510-3-002 Rod for saussage 600ml REF-5023-3-190

Reference: RK-100A

Squeegee blades for glass and plastic

These squeegee blades offer an effective solution for cleaning and preparing glass and plastic surfaces. Ideal for removing adhesive residues, paint or stubborn dirt, they guarantee precise, careful work without damaging delicate surfaces. These blades combine durability and safety. Their razor-sharp cutting edge ensures optimum use for all workshop...

Reference: RL-1382

SUCTION CUP OF MAINTENANCE OF windshield

Windshields adjustment suction cupStops the windshield in the correct place. ere is a simple solution to one ofthe most annoying problems a technician faces today.When a vehicle does not have stops it is difficult for one person to set thewindshield because he does not have anything to set it on.Here is the solution, before removing the old windshield put...

Reference: RL-170

Suction cup with handle diameter 70 mm

Suction cup with handle diameter 70 mmDurable quality suction cup. Adaptable on glass, marble, ceramic.Ideal to remove and install quarter glass.Loading capacity : 12 kgREF. RL-170Sold individually

Reference: RMI-309

Rearview Mirror Installer

Rearview Mirror Installer Use to install spring-loaded rearview mirrors with ease. Spring-loaded rearview mirrors are designed to detach from the windshield when hit by the air bag.  The Rearview Mirror Mounting Tool makes the job easy and reducing the risk of breaking the windshield.  To use: Set the upper jaw against the rearview mirror, put the nylon...

Reference: RMI-309

Rearview Mirror Installer

Rearview Mirror Installer Use to install spring-loaded rearview mirrors with easy Spring-loaded rearview mirrors are designed to detach from the windshield when hit by the air bag.  The Rearview Mirror Mounting Tool makes the job easy and reducing the risk of breaking the windshield.  To use: Set the upper jaw against the rearview mirror, put the nylon...

Reference: ROUL-NSE-FN

Castors with brake ( unit) for glass rack.

Castors with brake ( unit) for glass rack. 

Reference: RT-500

Wheel step ladder

Wheel step ladderLoad capacity: 225 kgsFacilitates working on high vehiclesSimply put it over the front wheel, if necessary swivel in from the front ( see fig.)Applicable for almost all saloon cars, vans, SUVs and all terrain vehicles with a wheel diameter of at least 600 mm.Note: This wheel step ladder is NOTapplicable forVWSharan / Ford Galaxy / Seat...

Reference: RT-520

Wheel-stepper

Reference: RT-550

Step ladder

Step ladderOpening size : 126 x 38 x 50 mmClose size : 95 x 30 x 33.5 mmFlat size : 95 x 30 mmLoading capacity : 150 KgsNet weight : 7.2 kgBrut weight : 8 kg