Reference: CROR-S

Brand: REPAREGLASS

Ball-tipped hook, with short shaft

Ball-tipped hook, with short shaft- 210 x 35 x 35 mm - 122 g

Reference: CS-696

Clipsaver door upholstery remover

EQUALIZER® ClipSaver door upholstery remover The front of the tool is tapered so it will fit easily under a clip. Spread the jaws slightly so they will go under and around the clip. Then, close the jaws and it removes the clip without damaging it. Great for the removal of door panels. - 230 x 76 x 51 mm - 205 g

Reference: CS-RC

TOOL-BOX WITHOUT ROLLING

Reference: CSG245RP

Air-powered caulking gun 310ml cartridges and 400ml saussages.

Air-powered caulking gun for 310ml cartridges and 400ml saussages.- Pneumatic gun- Variable speed switch with included valve.

Reference: CSG400

Compressed aircaulking gun, with piston rod, 400 and 600 ml saussages.

Air-powered caulking gun, with piston rod, 400 and 600ml saussages.This compressed air caulking gunworks with a piston rod.The aluminium cylinder can be easily dismantled, eather to clean it, or to replace the saussage.With its high-quality valve, the ejection pressure is strong.The ejection speed can be adjusted in progressive mode by using the...

Reference: CSG450RP

Air-powered caulking gun piston has 310ml cartridges and 400ml saussages.

Air-powered caulking gun piston has 310ml cartridges and 400ml saussages.

Reference: CT-749

Window and door clip removal tool

Window and doorclip removal toolThis tool is used to remove clips that are used with Opel and Ford brands, as well as with most of other vehicles that have clips.- 250 x 58 x 32 mm- 130 g

Reference: CTD-607

Recessed Cowling Clip Remover

Recessed Cowling Clip RemoverSome self-locking cowling clips are recessed down into the cowling. They are not the type that look like a Phillips or TORX®screw, but are the type that can be removed with a tool like the CGE-148. The only problem is the TPE657 will not reach downinto the recessed area and go under the head of the clip. If you manage to force...

Reference: CZ-444

Clip removal tool

Reference: DECAP-MIL

Battery-powered MILWAUKEE thermal scraper

The MILWAUKEE battery-powered thermal paint stripper is the ideal tool for mobile and versatile use. Compatible with batteries (PWR-5020 and PWR-5021) and chargers (PWR-5063 and PWR5064AC), it offers professional performance for your stripping, plastic welding, or heat-shrinking jobs. Highlights : Adaptable to MILWAUKEE batteries and chargers for maximum...

Reference: DES3-BACG

Large storage box

Reference: DES3-BACP

Small storage box

Reference: DES3-ROUL

Workshop trolley 3 levels

Reference: DEV-ROLL-N-CUT

ROLL-N-CUT wire reel

A suction-cup-mounted piano wire reel, which is positioned on the windscreen and allows the wire to be inserted all around the windscreen completely independently. Not compatible with ZLN-914.

Reference: DEV3-ROUL

Triple mobile reel on wheels

Simplify storage and access to your protective rolls with this mobile reel. Key features: Optimum mobility: Equipped with 4 rotating wheels, this mobile reel is easy to move, allowing you to use it anywhere in your workshop. Convenient storage: 3 storage levels, perfect for organizing and storing rolls of seat covers, floor mats, wiper spools and other...

Reference: DGL-201S

Wire gripping handle with sucker

This handle can be stuck to the glass to go around the vehicles front and grab it from the other side a real good idea and a really handy tool!

Reference: DIST1-SAV-DESTOCK

Soap dispenser with push extraction - 1Kg

Optimize the hygiene of your workshop with our push-button soap dispenser. Designed for intensive use, it allows for precise and controlled distribution of soap, ideal for hands exposed to oils, greases and other mechanical products. Made from robust materials, this dispenser is perfectly suited to the demanding environments of garages and repair shops....

Reference: DLH-511

Double-end moulding release tool

Double-end moulding release tool This heavy-duty tool is made of steel so it will not bend. It has a small rubber spacer through each end to the tool up off the glass about 1 mm. This is important for two reasons. First, it prevents the tool from scratching the glass. Secondly, it holds the end above the glass so there is less chance the tip will catch...

Reference: DPO-585

Rivet Stem Remover

Rivet Stem Remover It is often necessary to remove dor glasses without breaking them. Drilling out the rivet so you can remove the door glass is easy if you can remove the rivet stem. Rivet stems are made of steel and are impossible to drill out. Our rivet stem remover has contoured end so it will sit over the rivet and align perfectly with the rivet...

Reference: DST-734

T-handle wire threader with hole

REF-DST-734 T-handle wire threader with hole Just lay the wire in the notched tip and pass it through the polyurethane by pushing the tool from the inside to the outside.In the way, you can release the window. Always place the flat surface of the wire threader on the window, so that the hollow tube is not deformed.120 x 26 x 10 mm • 20 g

Reference: DST-734BUS

T-handle wire threader special bus and trucks

Special wire threader for bus and trucks with 2 holes ( for square or braided wire and nylon wire.) The end of the needle has a special designed in order to introduce easy the wire through the urethane. Push it in the urethane, insert the wire inside the tube, remove the wire threader and lead the wire throughout the urethane, in order to be able to pic...

Reference: ECHAFAUDAGE-2M50

MOBILE SCAFFOLDING 2M50

MOBILE SCAFFOLDINGIN ALUMINUM - LESS LONGSize of the platform of 2.50MAttention: Overall width: 2.67M with Ergots

Reference: ENL842

Cutting blade. Length: 38mm

Cutting blade. Length: 38mm- 55 x 30 x 38 mm 50 gBE CAREFUL: Ninja blades have been elaborated to fit on the Ninja knife.They should not be usedwith other knives.

Reference: ENO841

Cutting blade. Length: 25mm

Cutting blade. Length: 25mm - 60 x 30 x 25 mm 45 gBE CAREFUL: Ninja blades have been elaborated to fit on the Ninja knife. They should not be used with other knives.

Reference: ENT840

cutting blade. lenght: 19mm

cutting blade. lenght: 19mm- 56 x 30 x 19 mm 40 gBE CAREFUL: Ninja blades have been elaborated to fit on the Ninja knife. They should not be used with other knives.

Reference: ESB1304

EQUALIZER® blade 100 mm

EQUALIZER® blade 100mm.Serrated blades and sheathsThese patented blades are made of spring steel and specifically designed for our tools. They are sharpened with a unique double-serration method. Each serration is also serrated. this sharpening method gives our EQUALIZER® blades a smoother and faster cutting action than ever before. These blades will fit...

Reference: ESB1312

EQUALIZER® blade 300mm.

EQUALIZER® blade 300mm.Serrated blades and sheathsThese patented blades are made of spring steel and specifically designed for our tools. They are sharpened with a unique double-serration method. Each serration is also serrated. this sharpening method gives our EQUALIZER® blades a smoother and faster cutting action than ever before. These blades will fit...

Reference: ETABLI-183

Workshop workbench with drawers and metal top

Workshop workbench with steel top (without grid, without wood top and without accessories) Discover our workshop workbench with drawers and steel top, ideal for safely storing your DIY tools and accessories. Drawer colors may vary according to availability. Product specifications:- Dim. L: 183cm - W :73cm - H:89cm OPTION n°1: REF-GRILLE-180- Perforated...

Reference: EWA-1702

Windshield wiperarm removal tool

Extremely loadable. Made of massive metal. Can be used on virtually any passenger and commercial vehicle. Specially recommended for the BMW 5 and BMW 7 series.- 104 x 38 x 140 mm- 518 g

Reference: FB072

Cutting blade, cranked - 45 mm

Cutting blade, cranked - 45 mm

Reference: FB073

FEIN cutting blade, straight 35 mm

FEIN cutting blade, straight 35 mm (56 mm 12 g)

Reference: FB076

FEIN cutting blade, straight 35 mm (56 mm 12 g)

cutting length: 24mm 17g Sold individually

Reference: FB079

Hook blade 36 mm

cutting length : 36mm 17g Sold individually

Reference: FB081

Cutting blade, cranked 60 mm

Lame à découper, courbe profondeur de coupe : 60 mm longueur totale : 85 mm vendue à l'unité

Reference: FB083-DESTOCK

Hook blade with U shape - 10mm

REF-FB-083 Hook blade with U shapeCutting length: 10 mmSold individually

Reference: FB101

Hook blade with U shape - 60mm

REF-FB-101 Hook blade with U shapeCutting length: 60 mmSold individually

Reference: FB107

Hook blade with U shape - 60 mm

profondeur de coupe : 60 mmvendue à lunité

Reference: FB110

Hook blade with U shape - 40mm

REF-FB-110 Lame à crochet en U Profondeur de coupe 40 mmvendue à l’unité

Reference: FB111

Hook blade with U shape - 95 mm

profondeur de coupe : 95 mmvendue à l' unité

Reference: FB121

Cutting blade, straight - 26mm

Cutting blade, straightCutting length: 26 mmSold individually

Reference: FB123

Cutting blade, straight 40 mm

profondeur de coupe : 40 mm longueur totale : 74 mm vendue à l'unité

Reference: FB153

Cutting blade, straight 50 mm

Lame à découper Fein 50 mm

Reference: FB154

Hook blade with U shape- 45 mm

REF-FB-154 Lame à crochet en U Profondeur de coupe 45 mmvendue à l’unité

Reference: FB194

Hook blade 110 mm

LAME A CROCHET EN U - 110 mm

Reference: FB207

Hook blade with L shape - 25,4 mm

profondeur de coupe : 25,4 mmvendue à l'unité

Reference: FB208

Hook blade with L shape- 19mm

profondeur de coupe : 19 mmvendue à lunité

Reference: FB209

Hook blade with L shape - 38 mm

profondeur de coupe : 38 mmvendue à l'unité

Reference: FB211

Serrated hook blade with U shape - 24 mm

Lame à crochet crantéeprofondeur de coupe : 24 mmvendue à l'unité

Reference: FB212

Serrated hook blade with U shape - 36 mm

Lame à crochet crantéeprofondeur de coupe : 36 mmvendue à l'unité

Reference: FBS129

Scraper blade set

Jeu de 2 lames à racler. l'une large de 12 mm, l'autre de 25 mm

Reference: FICEL9M

String of 9 meters for TB-102

String of 9 meters for TB-102 (Rope insert tool).

Reference: DESTOCK-FRE-080-P

Retaining tool for hubcaps and metal strips

To prevent the corners of hubcaps from sticking out, they are often attached with adhesive tape. However, this method carries risks: adhesives can react chemically with the vehicle's paintwork, causing damage. The ideal solution? Our retaining tool, specially designed to secure hubcaps without compromising paint quality. Advantages : Optimum protection:...

Reference: FSB102

Saw disk ø 63 mm

disque de scie ø 63 mm vendu à l'unité

Reference: FSB103

Saw disk ø 80 mm

Disque de scie ø 80 mm vendu à l'unité

Reference: FSC-300SPECIAL

Brand: REPAREGLASS

Special scraper

REF. FSC-300SPECIALSCRAPER (without blade)To scrape the old urethane bead. This scraper is universal due to thefact it can accept different blades width ( 13 mm – 16 mm – 20 mm)and angular blades

Reference: FSC-350

Brand: REPAREGLASS

Special scraper

REF. FSC-350SCRAPER (without blade)To scrape the old urethane bead. This scraper is universal due to thefact it can accept different blades width ( 13 mm – 16 mm – 20 mm)and angular bladesIts locking system with roll allow a quick and easy blade replacement

Reference: FSC1.7

FEIN electric knife

The powerful oscillator for the vehicle industry. Ideal for removing bonded panes and carrying out vehicle repairs. Anti-vibration system. Up to 70% fewer vibrations as the external motor housing is completely separate. For permanently safe working. 450 Whigh-power motor with high copper content for outstanding cutting speeds and maximum work progress,...

Reference: FSC1.7L

FEIN electric knife + 12 blades

Fein electric knife + 9 blade: - with tool box and accessories- more lightweight- more refined- easy and rapid replacement of the wrench- speed adjuster-knife -BLADE REF-FB212 x2-BLADE REF-FB207 x3-BLADE REF-FB208 x1-BLADE REF-FB209 x1-BLADE REF-FB157 x1-BLADE REF-FB111 x1

Reference: FSL240

Pinchweld scraper with interchangeable blade

Pinchweld scraper with interchangeable bladeThis may be the last pinchweld scraper you will ever buy! From now on.You may just buy blades. When the blade finally wears out, remove the two screws, pull out the old blade, drop in a new blade and tighten the two screws. These pinchweld scrapers are made of spring steel and are hard enough so they will not...

Reference: FSP-4PCS

Set of 4 plastic scrapers

Set of 4 plastic scrapers

Reference: FZS-6020

Static protection strip for rocker panels

Effectively protect vehicle underbodies during repair work with our protective tape specially designed for automotive professionals. This sturdy tape offers protection against scratches, bumps and scuffs, preserving the condition of the underbody during workshop work. Made from impact-resistant material, it is easy to apply and adheres perfectly to the...

Reference: GBM-446

Professional Lever Set - Set of 5

The essential tool for precise, safe disassembly of bodywork and interior components. This set of 5 levers is specially designed to meet the needs of bodybuilders and garages. It makes it easy to dismantle mirror faces, interior trim and other delicate components, without requiring the use of other protections. Advantages: Safe work: Allows work on...

Reference: GCC-506

Glass run channel cleaner

Glass run channel cleanerIf you have ever cleaned glass out of a glass run channel, you know the problem. Broken pieces of tempered glass will hide behind the lip of the glass run chanel and scrape the door glass when you roll it up or down. The glass run channel cleaner reaches behind that lip to remove even the most stubbornly-wedged pieces of glass...

Reference: GEAR-500

Gearshift protection (500-speed gearbox)

Protect your gearshift levers during repair work with our dedicated cover, specially designed for automotive professionals. Practical and easy to install, this cover effectively protects the gearshift from dirt, oil and scratches, ensuring a clean and tidy workspace. Made from hard-wearing, non-slip material, this cover is designed for intensive use in...

Reference: GRAISSE-JOINT

Rubber gasket grease - 1kg

Optimize the maintenance and durability of rubber seals with our Rubber Seal Grease - 1kg, a product specially designed for bodywork professionals and garages. Applications: Ideal for maintaining door, trunk and windshield seals. Protects seals subjected to extreme thermal variations, UV and chemical exposure. Reduces squeaking and improves joint...

Reference: H1

Long Olfa®

Olfa® knifeKnife with a snap-off blade, 25 mm and 0,7 mm wide.The blade can be outside its housing up to a length of 10 cm and a thumb locking screw allows you to lock the blade in any position.Back of the knife features a rubber grip that lets the knife rest comfortably in your hand and keeps it from slipping.- 172 x 34 x 25 mm - 155 g

Reference: H600

Cutter 9 mm

9 mm cutter - supplied without bladeCompatible blades: Ref.AB-50S

Reference: HB10

Heavy-duty snap-off blade

Heavy-duty snap-off blade- package of 10 pieces- 140 x 25 x 0.7 mm - 106 g

Reference: HDS-480NEW

Adjustable windshield trestle

Adjustable windshield trestleREPAREGLASS- width multi-adjustable for different lengths and weights so as carry all sizes of windshields.- Very sturdy version, load capacity up to 250Kg.- Made of electroplated steel, diameter: 30 mm.- Resistant foam at the base of the trestle.- 105 cm x 95 cm x 110 cm6.700 kg

Reference: HDW5634FEUTRE

Felt for RAPTOR device

Felt for RAPTOR device

Reference: 8PY010600-031

SERVICE HOTLINE DEDIE OUTIL DIAGNOSTIQUE ET CIBLE

Not avalaible

Reference: HOU-250

LDPE plastic seat covers (roll of 200)

Ensure the cleanliness and protection of vehicle seats during maintenance and repair work with our roll of LDPE laminated seat covers, designed for automotive professionals. Each cover provides a waterproof and resistant barrier, effectively protecting against dust, dirt, oils and other common workshop residues. Features: Complete protection: protects...

Reference: HP564

Clear headliner protector

Reference: ISH-691

Handle for instalation stick

Reference: JCS452

Compact C-clip remover

Compact C-clip removerC-clip removers are an item that every technician has inhis toolbox, but those C-clips removers will not alwaysfit into the tight spots and compound curves on somevehicles. The Compact C-clips remover has a flat designthat will let you use it from all sides. This handy tool isdefinitely one that no technician should be without.REF....

Reference: JM5

Anti-overflow foam gasket - 5.5m

A must-have for precise, clean and professional windshield installation. This anti-spill foam gasket is specially designed to guarantee a flawless finish when installing windscreens. Its main function is to compensate for irregularities and prevent excessive glue overflow, ensuring a uniform and neat application. It also contributes to a perfect seal and...

Reference: JMFE

Expanding foam adhesive joint - 2m

The ideal solution for perfect soundproofing and optimum fit between dashboard and windshield. Advantages : Easy to fit: Integrated adhesive ensures fast, reliable attachment. Vibration reduction: Improves acoustic comfort in the cabin by reducing noise and friction. Versatility: Suitable for both repairs and replacement of the original gasket.

Reference: JPB391

Plastic razor blades

Plastic razor bladesThese plastic razor blades are suitable to remove stickers andlabels from glass surfaces.As the blade is made of plastic it cannot scratch the glass contraryto a metal blade that could.Box of 100 blades

Reference: JPU10

Soft universal mouldings • 10 mm x 22,8 m

Soft universal mouldings Strong adhesion. Very flexible ruber. Easy removal of theliner. REF-JPU10• 10 mm x 22,8 m PLEASE ASK OUR KEYCHAIN SAMPLE WHICH WILL ALLOWS TO DISCOVEROUR UNIVERSAL MOULDING RANGE.Supplied with a detail list with many exemple of cars that cover.)

Reference: JPU5

Soft universal mouldings • 5 mm x 22,8 m

Soft universal mouldings Strong adhesion. Very flexible ruber. Easy removal of theliner. REF-JPU5• 5 mm x 22,8 m PLEASE ASK OUR KEYCHAIN SAMPLE WHICH WILL ALLOWS TO DISCOVEROUR UNIVERSAL MOULDING RANGE.Supplied with a detail list with many exemple of cars that cover.)

Reference: JPU7

Soft universal mouldings • 7 mm x 22,8 m

Soft universal mouldings Strong adhesion. Very flexible ruber. Easy removal of theliner. REF-JPU7• 7 mm x 22,8 m PLEASE ASK OUR KEYCHAIN SAMPLE WHICH WILL ALLOWS TO DISCOVEROUR UNIVERSAL MOULDING RANGE.Supplied with a detail list with many exemple of cars that cover.)

Reference: JPU7M

Soft universal mouldings • 7 mm x 22,8 m

Soft universal mouldings Strong adhesion. Very flexible ruber. Easy removal of theliner. REF-JPU7M• 7 mm x 22,8 m PLEASE ASK OUR KEYCHAIN SAMPLE WHICH WILL ALLOWS TO DISCOVEROUR UNIVERSAL MOULDING RANGE.Supplied with a detail list with many exemple of cars that cover.)

Reference: JPU8

Soft universal mouldings • 8 mm x 22,8 m

Soft universal mouldings Strong adhesion. Very flexible ruber. Easy removal of theliner. REF-JPU8• 8 mm x 22,8 m PLEASE ASK OUR KEYCHAIN SAMPLE WHICH WILL ALLOWS TO DISCOVEROUR UNIVERSAL MOULDING RANGE.Supplied with a detail list with many exemple of cars that cover.)

Reference: JPU9

Soft universal mouldings • 9.5 mm x 22,8 m

Soft universal mouldings Strong adhesion. Very flexible ruber. Easy removal of theliner. REF-JPU9• 9.5 mm x 22,8 m PLEASE ASK OUR KEYCHAIN SAMPLE WHICH WILL ALLOWS TO DISCOVEROUR UNIVERSAL MOULDING RANGE.Supplied with a detail list with many exemple of cars that cover.)

Reference: JU100

Universal mouldings • 7 mm x 22,8 m

Universal mouldingsExcellent forming and adhesion. Remain flexible even withlow temperatures. Butyl adhesive- No cracking, no weakness, no distorsion REF-JU100• 7 mm x 22,8 mFor T4 PLEASE ASK OUR KEYCHAIN SAMPLE WHICH WILL ALLOWS TO DISCOVEROUR UNIVERSAL MOULDING RANGE.Supplied with a detail list with many exemple of cars that cover.)

Reference: JU101

Universal mouldings • 9.5 mm x 22,8 m

Universal mouldingsExcellent forming and adhesion. Remain flexible even withlow temperatures. Butyl adhesive- No cracking, no weakness, no distorsion REF-JU101• 9.5 mm x 22,8 mFor T4 PLEASE ASK OUR KEYCHAIN SAMPLE WHICH WILL ALLOWS TO DISCOVEROUR UNIVERSAL MOULDING RANGE..Supplied with a detail list with many exemple of cars that cover.)

Reference: JU105

Universal mouldings • 16 mm x 22,8 m

Universal mouldingsExcellent forming and adhesion. Remain flexible even withlow temperatures. Butyl adhesive- No cracking, no weakness, no distorsion REF-JU105• 16 mm x 22,8 mFor T4 PLEASE ASK OUR KEYCHAIN SAMPLE WHICH WILL ALLOWS TO DISCOVEROUR UNIVERSAL MOULDING RANGE.Supplied with a detail list with many exemple of cars that cover.)

Reference: JU107

Universal mouldings 19 mm x 22,8 m

Universal mouldingsExcellent forming and adhesion. Remain flexible even withlow temperatures. Butyl adhesive- No cracking, no weakness, no distorsion REF-JU107- 19 mm x 22,8 mFor T4 PLEASE ASK OUR KEYCHAIN SAMPLE WHICH WILL ALLOWS TO DISCOVER OUR UNIVERSAL MOULDING RANGE.Supplied with a detail list with many exemple of cars that cover.)

Reference: JU108

Universal mouldings • 25 mm x 22,8 m

Universal mouldingsExcellent forming and adhesion. Remain flexible even withlow temperatures. Butyl adhesive- No cracking, no weakness, no distorsion REF-JU108• 25 mm x 22,8 mFor T4 PLEASE ASK OUR KEYCHAIN SAMPLE WHICH WILL ALLOWS TO DISCOVEROUR UNIVERSAL MOULDING RANGE.Supplied with a detail list with many exemple of cars that cover.)

Reference: JU109

Universal mouldings • 31 mm x 22,8 m

Universal mouldingsExcellent forming and adhesion. Remain flexible even withlow temperatures. Butyl adhesive- No cracking, no weakness, no distorsion REF-JU109• 31 mm x 22,8 mFor T4 PLEASE ASK OUR KEYCHAIN SAMPLE WHICH WILL ALLOWS TO DISCOVEROUR UNIVERSAL MOULDING RANGE.Supplied with a detail list with many exemple of cars that cover.)

Reference: KIT-NETGUN

Barrel Cleaning Kit

Reference: KIT-NETGUN

Barrel Cleaning Kit

This kit allows to clean the residus of urethane that are sticks inside the caulking gun barrel.Barrel: Ref. NETGUN-TUBEWipe (x10): Ref. NETGUN-TISSUExpanded dim.: 45 x 45cmCleaner: Ref. NETGUN-CLEAN

Reference: KIT-NETGUN

Barrel Cleaning Kit

Reference: KIT-NETGUN

Barrel Cleaning Kit

Reference: KIT-NETGUN

Barrel Cleaning Kit

Reference: NSE-B

Professional extendable lashing bars for light commercial vehicles.

Reference: L110

Reel on wheels for electrostatic film - Marouflage paper, etc...

Simplify storage and use of your protective rolls with this reel on wheels. Key features: Versatile: This dispenser is designed to support a variety of rolls, such as electrostatic film, marouflage paper and other consumables, with rolls up to 1175 mm long. Adjustable, sliding “T” rod: Allows the roll to be locked at the desired height, offering...

Reference: L2

Olfa® knife

Olfa®knife This knife is made of high impact plastic, has a stainless steel blade housing and a positive locking thumb wheel so that you can set the blade at any length. The back of the knife features a rubber grip that lets the knife rest comfortably in your hand and keeps it from slipping. The famous model. - 146 x 40 x 20 mm - 110 g

Reference: LB-780

Inflator set

Reference: LB10

Rigid not segmented blades for l2 and xl2 knives

Rigid not segmented blades, for L2 and XL2 knives Package of 10 pieces - 110 x 18 x 0.5 mm - 65 g