Reference: MS-180

Installation stick

Reference: MS-182

Installation stick with one round end shape and one flat end shape

Reference: MSP-211

BOX EXTRACTOR

Arm wiper pullers kit If you remove a bolted on windshield wiper a few months after the vehicle was builtthen it is usually not difficult to remove, but try removing the wiper arm two or threeyears after it was built. It can be almost impossible because manufacturers use onetype of metal on the wiper arm and a different type of metal on the wiper post. If...

Reference: MTS-068

Hook and pick set

Hook and pick setThis set of mini hooks is very helpful to remove joints and coverings while avoiding any possible damage.This practical set contains hooks in different shapes and a pick. The length of these tools is only 13mm! - 127 x 25 x 25 mm - 280 g

Reference: NET-VENT

Rubber cleaner

Rubber Cleaner is specially designed to clean and restore the appearance of all your rubber components such as seals, rubberized hubcaps, suction cups and similar surfaces. It effectively removes dirt and residues and restores the shine of rubber, prolonging its durability and appearance. Caution: This product is not recommended for certain plastics or...

Reference: NMT-448

Mechanical pick up

Mechanical pick up The use of telescopic magnet could be sometimes impossible to use because of non ferrous items. It is times like these when you need our Mechanical Pick-Up. It is designed with steel fingers that are spring-loaded that will grip an item up to 2,5 cm in diameter.

Reference: NSE-MUR6

Wall glass racks with 6 compartments

Wall glass racks with 6 compartmentsL: 680 mm x H: 560 mm2 cm between each tubesWeight : 9,8 KgLoading capacity : 96 KgDimensions L: 680 mm x H: 560 mm2 cm between each tubesDelivered without setting screw set

Reference: NSE-825

Telescopic Windshields rack - 5 compartments (optional wheels)

Telescopic Windshield Rack, 5 compartments. L: 800 mm x W: 540 mm x H: 635 mm Maximum height: 970 mm Weight: 22 kg Load capacity: 200 kg These windshield racks allow you to transport your windows safely, saving you the hassle of loading bulky cardboard boxes in the future. The racks are foldable, so take up very little space when empty. Adjustable to 3...

Reference: NSE-826

Telescopic Windshields rack - 9 compartments (optional wheels)

9-compartment telescopic windshield rack. H: 800 mm x W: 845 mm x H: 635 mm Maximum height: 970 mm Weight: 32.80 kg Load capacity: 200 kg

Reference: OL30

Olfa®knife, with one snap-off blade of 9mm

Olfa® knife, with one snap-off blade of 9 mm.Standard knives with a wide 18 mm blade are generally too wide to accomplish fine jobs. With its retractable blade of 9 mm wide, this knife allows a fine cutting with one hand.- 130 x 16 x 10 mm - 36 g

Reference: OPB

Windshield stand

Windshield standWindshield stand with 4 articulated rubber plates for thepreparing and installing of bonded windows. As it is used on bench vices, it is very practical and no effort is needed to move it.

Reference: OUV-CART

Urethane tube opener

Reference: P-04200101

Rubber foot

Rubber foot

Reference: PAIG-200

Wire gripping handles (corkscrew shape)

Wire gripping handlesIdeal solution to work rapidly and without problem. Feed the wire through the hole in the wedge shaft (fig A), loop it through the hole at the top of the shaft (fig B) and then bring it back into the large plastic handle. By pressing the wedge back into the handle, the wire is held in place (fig C). To shorten the wire, press down on...

Reference: PAST-V5315

White pellet for V54 pistol

The white pad for the V54 gun is an essential replacement part, compatible with models manufactured from January 2015 onwards. Designed to ensure the proper functioning and extrusion accuracy of the gun, it guarantees clean and efficient application in all your bonding operations. Features: White pad for V54 gun Compatible with models from January 2015...

Reference: PASTILLE-NOIRE

Plastic washer: Milwaukee 18V

Black plastic washer specially designed to adapt the Milwaukee 18V gun for use with 400 ml and 600 ml cartridges. It ensures perfect compatibility and optimal hold of the cartridge in the gun, guaranteeing smooth and controlled extrusion of the product.

Reference: PASTILLE-ROUGE

Plastic washer: Milwaukee 12V

Red plastic washer specially designed to adapt Milwaukee 12V gun for use with 400 ml and 600 ml cartridges. It ensures perfect compatibility and optimal hold of the cartridge in the gun, guaranteeing smooth and controlled extrusion of the product.

Reference: PEZ-120

Anti-skid roof/hood liner

Protect the paintwork on your vehicle's roof or hood when you're working on it, with our non-slip protective canvas. Ideal for bodybuilders and garages, it offers a practical and safe solution for fitting tools, screws and small assembly equipment without the risk of damaging the vehicle's surface. Dimensions and weight : Dimensions: 1720 x 700 x 2 mm....

Reference: PH-1355

Spatula curved to remove the clips

Curved Door Upholstery Remover For removing plastic fasteners in confined places. It is the same upholstery remover as the one shown above, but it is instended for use on the front part of the door where the door jam will often interfere with the removal of the door panel. Place the notch in the tool over the fastener and pry the fastener out the hole. It...

Reference: PORTIQUE

2 in 1 Glass cradle for panoramic roof and windshield applications

Reference: PRO-LAV

Special protector part to protect glass cleaner sprayer solution

REF. PRO-LAVMany of the wipers system includes a glass cleaner sprayer solution.The hose is integrated to the arm wiper and runs thanks to its movements. The sprayer couldbe damaged with an arm wiper puller. The tightning nut of the puller has to be located on the specialprotector of the center area of the cleaner sprayer. Untight the bolt which is...

Reference: PS-12

Parer blades 12mm

Parer blades (scraper not include)REF-PS-12 Blade 12 mmThese parer blades are especially good for cleaning the pinchweldfrom excessively applied polyurethane in curves and corners.Thereby the special shape reduces the risk of damaging the paintcompared to standard scraper blades. The blades are suitable for ourscraper tools FSC-300SPECIAL and FSC-350...

Reference: DESTOCK-PS-215

Glue joint smoother/extractor

Simplify your finishing and joint removal jobs with this versatile tool designed for professionals. Key features: Dual function: Allows you to even out glue joints for a perfect finish and easily remove joints (silicone, PU). Convenient use: work is performed with one hand, saving time and facilitating handling. Precision and cleanliness: Guarantees...

Reference: PSD12

Parer blades diam.12mm

Parer blades (scraper not include) REF-PSD-12 Blade diameter 12 mThese parer blades are especially good for cleaning the pinchweldfrom excessively applied polyurethane in curves and corners.Thereby the special shape reduces the risk of damaging the paintcompared to standard scraper blades. The blades are suitable for ourscraper tools FSC-300SPECIAL and...

Reference: PSD6

Parer blade 6mm

Parer blades (scraper not include)REF-PSD-6 Blade diameter 6 mmThese parer blades are especially good for cleaning the pinchweldfrom excessively applied polyurethane in curves and corners.Thereby the special shape reduces the risk of damaging the paintcompared to standard scraper blades. The blades are suitable for ourscraper tools FSC-300SPECIAL and...

Reference: PSH-120-VERIBOR

Veribor suction cup pair Ø 120 mm

VERIBOR SUCTION CUP PAIR.REF. PSH-120-VERIBOR• Ø 120 mm : Loading capacity : 80 kg

Reference: PSI-200

Double nylon seat panel cover

Effectively protect the interior of your vehicles with this one-piece double seat cover, ideal for automotive professionals. Applications : Ideal for workshops, garages and car cleaning services. Also suitable for jobs requiring temporary protection of vehicle interiors.

Reference: PSL-150-1

Suction cup deluxe sold individualy (Ø 150 mm)

Suction cup deluxe sold individualy (Ø 150 mm)Easier and safer to attach that common suction lifters with clamp lever technology.The bell shaped rubber pads already adhere onto the glass surface with slight pressing even before pressing the lever.Possibility to pass a belt through. Load capacity for each lifter is 80 kg.

Reference: PSL-150-1VERIBOR

Veribor suction cup Ø 150 mm

VERIBOR SUCTION CUPREF-PSL-150-1VERIBOR• Ø 150 mm : Loading capacity : 80 kg

Reference: PTB

HDPE” standard dashboard protector

Avoids snagging the dashboard with the piano wire during cutting Move everything along the path of your piano wire

Reference: PTB-6030

Dashboard protection

Reference: PTB-L

Set of 4 high-quality dashboard protectors (HDPE)

Set of 4 windscreen and dashboard cut-out protectors (HDPE) - High quality Comprising :  - universal curved protector  - universal straight protector  - small universal curved protector  - small universal straight protector REF. PTB-L

Reference: PTB-LRCUT

Dashboard protection

Reference: PTB-SCUT

Flexible Dashboard protection

Reference: PWR-2016-111

Circular washer: Milwaukee 18V

Circular washer designed to adapt cartridges to Milwaukee 18V guns. Positioned behind the BLACK PACKET, it ensures optimal cartridge retention and perfect compatibility with the equipment. Essential for reliable and secure mounting.

Reference: PWR-2017

18V Lithium Milwaukee cordless guns

18V Lithium Milwaukee cordless guns -Ejection pressure : 4500Nm -+ 20 % Speed -Upgrade performance up to 40 % compared to old version -Excellent for high viscosity PU -Red-Lithium Ion technology Réf: PWR-2017: Gun for cartridges 310 ml and saussages 400 ml

Reference: PWR-2019

MILWAUKEE Gun for saussages 400 ml + 600 ml, and cartridges 310 ml

18V Lithium Milwaukee cordless guns -Ejection pressure : 4500Nm -+ 20 % Speed -Upgrade performance up to 40 % compared to old version -Excellent for high viscosity PU -Red-Lithium Ion technology REF-PWR-2019: Gun for saussages 400 ml + 600 ml, and cartridges 310 ml

Reference: PWR-5063

Chargeur de batterie Milwaukee - 12 V et 18 V

This 18V charger is specially designed to efficiently recharge the batteries of your Milwaukee and PowerPush guns. Compatibility: 12V battery: PWR-5012 (2Ah), PWR-5013 (4Ah) 18V battery: PWR-5018 (2Ah), PWR-5021 (5Ah) Ensure maximum autonomy for your tools with this robust and high-performance charger.

Reference: PWR-5074-NEW

Rack handle: MILWAUKEE 18V pistol grip

Replacement rack handle specially designed for MILWAUKEE 18V extruder guns. It ensures a comfortable grip, optimal control during extrusion, and smooth pressure transmission. Ideal for replacing a damaged or worn part and extending the life of your tool.

Reference: PWR-5076

Plastic nozzle holder for MILWAUKEE

Plastic washer for holding nozzles, compatible with MILWAUKEE extruder guns. Ensures reliable, stable nozzle attachment during extrusion, preventing loosening during application.

Reference: PWR-5064AC

MILWAUKEE battery charger for cigarette lighter - 12 V and 18 V

This MILWAUKEE cigarette lighter charger is the ideal solution for mobile professionals, particularly in the windshield repair and bonding or car cleaning sectors. Compact and practical, it allows you to recharge your batteries directly from your vehicle's cigarette lighter socket, for total autonomy even when on the move. Compatible with: 12 V...

Reference: RACCORD1-4FEMELLE

Coupling for guns

This connector is designed to provide a quick, reliable, and leak-proof connection between your guns and your compressed air source. Made from robust and durable materials, it guarantees safe and optimal use in workshop conditions.

Reference: RCH-163

Flexible pull handle with neoprene coating

The REPAREGLASS flexible pull handle with neoprene coating is designed for comfortable and safe use during cold cutting. It has the same features as the classic ZDK-395 handle, with the added advantage of a neoprene coating that improves grip while protecting painted surfaces on the vehicle. Perfect for use with ZDK-395 cold cutting knives, this flexible...

Reference: RK-100A

Squeegee blades for glass and plastic

These squeegee blades offer an effective solution for cleaning and preparing glass and plastic surfaces. Ideal for removing adhesive residues, paint or stubborn dirt, they guarantee precise, careful work without damaging delicate surfaces. These blades combine durability and safety. Their razor-sharp cutting edge ensures optimum use for all workshop...

Reference: RL-1382

SUCTION CUP OF MAINTENANCE OF windshield

Windshields adjustment suction cupStops the windshield in the correct place. ere is a simple solution to one ofthe most annoying problems a technician faces today.When a vehicle does not have stops it is difficult for one person to set thewindshield because he does not have anything to set it on.Here is the solution, before removing the old windshield put...

Reference: RL-170

Suction cup with handle diameter 70 mm

Suction cup with handle diameter 70 mmDurable quality suction cup. Adaptable on glass, marble, ceramic.Ideal to remove and install quarter glass.Loading capacity : 12 kgREF. RL-170Sold individually

Reference: RMI-309

Rearview Mirror Installer

Rearview Mirror Installer Use to install spring-loaded rearview mirrors with ease. Spring-loaded rearview mirrors are designed to detach from the windshield when hit by the air bag.  The Rearview Mirror Mounting Tool makes the job easy and reducing the risk of breaking the windshield.  To use: Set the upper jaw against the rearview mirror, put the nylon...

Reference: RMI-309

Rearview Mirror Installer

Rearview Mirror Installer Use to install spring-loaded rearview mirrors with easy Spring-loaded rearview mirrors are designed to detach from the windshield when hit by the air bag.  The Rearview Mirror Mounting Tool makes the job easy and reducing the risk of breaking the windshield.  To use: Set the upper jaw against the rearview mirror, put the nylon...

Reference: ROUL-NSE-FN

Castors with brake ( unit) for glass rack.

Castors with brake ( unit) for glass rack. 

Reference: RT-500

Wheel step ladder

Wheel step ladderLoad capacity: 225 kgsFacilitates working on high vehiclesSimply put it over the front wheel, if necessary swivel in from the front ( see fig.)Applicable for almost all saloon cars, vans, SUVs and all terrain vehicles with a wheel diameter of at least 600 mm.Note: This wheel step ladder is NOTapplicable forVWSharan / Ford Galaxy / Seat...

Reference: RT-520

Wheel-stepper

Reference: RT-550

Step ladder

Step ladderOpening size : 126 x 38 x 50 mmClose size : 95 x 30 x 33.5 mmFlat size : 95 x 30 mmLoading capacity : 150 KgsNet weight : 7.2 kgBrut weight : 8 kg

Reference: RTD-499

Pair of ratcheting tie downs - length: 5m

Pair of ratcheting tie downsRatcheting tie downs are used by glaziers to secure freshly bonded-in glasses.Use these ratcheting tie downs together with our suction cups so as to hold vertical-glazed glasses in place while the urethane cures. The ratcheting tie downs are simply passed through the handles of the vacuum cups and tight-ened.- 165 x 165 x 10 mm...

Reference: SB-880

Impact-resistant safety goggles

When working with glass, wearing protective eyewear is essential to ensure eye safety against shards and debris. Our shatterproof glasses offer side and front protection thanks to their ergonomic design. They can be worn over most prescription glasses, ensuring optimal comfort for all users. Features: - Complete protection: Protects the eyes against...

Reference: SB-887

Illuminating protective goggles

Work in complete safety, even in low light conditions, thanks to our illuminating safety glasses. Designed to offer dual functionality, these glasses effectively protect your eyes from shards, dust and projections while integrating powerful and discreet LED lighting on each side of the temples. Ideal for poorly lit environments, they provide clear and...

Reference: SC313

13mm scraper blades for ref. FSC-300SPECIAL

12 mm scraper blades for ref. FSC-300SPECIAL- Package of 10 blades- 65 x 20 x 70 mm - 26 g

Reference: SC316

Scraper blades for ref. FSC-300SPECIAL scrapers

16 mm scraper blades for ref. FSC-300SPECIAL- Package of 10 blades- 63 x 21 x 18 mm - 30 g

Reference: SC320

20mm scraperblades for ref. FSC-300SPECIAL

Reference: SD-21

Braided wire - ø 0,80 mm - 22.5M

Braided wire21 ml REPAREGLASSBraided wire The braided wire is made of three stainless steel resistant wires that are braided to one strand. The wire is anodized (with a traditional gold colour). It has a 0.80mm diameter.

Reference: SD-22

Braided wire in a spool - - ø 0,80 mm - 22ML

Braided wire in a spool REPAREGLASS ø 0.80 mm, length: 22 m, Wound on a plastic spool. 1083 NEWTON The wire to be cut is twisted according to our exact specifications from three strong stainless steel wires. The wire is anodised in a typical "gold" colour.

Reference: SERV-CANMAX

Modular mobile workshop trolley made from two materials - bare

Organize your tools efficiently with this mobile workshop trolley made from two materials, designed to offer robustness, practicality, and mobility in all your work environments. Its sturdy structure combined with two-material components ensures enhanced durability while providing optimal ease of use. Key features: Telescopic handle: makes transport easy...

Reference: SERV-FAT

Modular mobile workshop trolley made from two materials - bare

Designed for demanding professionals, this modular dual-material mobile workshop trolley combines robustness, modularity, and ample storage capacity. Its intelligent design allows easy access to all your tools while ensuring smooth and safe transport on all types of construction sites. Main features: Removable 50 cm tool box with integrated tool holder...

Reference: SERV-OPB-PRO-NUE

Empty cart trolley without glass rack ans without foam inside the drawers

Reference: SGR-380

Glass scraper, with 1 RK-100A blade

Glass scraper with 1 RK-100A bladeMainly used to rapidly and entirely remove bond residues on windows that will be reinstalled. Also used to remove stickers. Simply replace the old blade by a new one, no sharpening needed.

Reference: SK120

Replacement blade for fsl 240 pinchweld scraper l:13mm

Replacement blade for fsl 240 pinchweld scraper 13mm wide

Reference: SK130

Replacement blade for fsl 240 pinchweld scraper l:16mm

Replacement blade for fsl 240 pinchweld scraper l:16mm

Reference: SK150

Replacement blade for fsl 240 pinchweld scraper l:19mm

Replacement blade for fsl 240 pinchweld scraper l:19mm

Reference: SSU-190

Universal sharpening stone with handle

Reference: STA668

Protection for trestles

PROTECTION FOR TRESTLESWho never thinked about replace its trestle foam ?We are offering our new neoprene fabric velcrostripwith sharkskin, made of 5 mm, with 5 cm wideNo need to remove the old covers, just wrap andsecure with the Velcro.REF. STA-668Sold individually ( 1 strip)Stand not include .Order 2 x STA-668 to protect one stand.Stand not include.

Reference: TAP-500

Disposable floor mats (Box of 500)

Keep the interior of your customers' vehicles clean and protected with our disposable floor mat made of white crepe paper, specially designed for car repair professionals. Ideal for protecting original carpets against dirt, grease and work residues, this floor mat offers a hygienic and practical solution for every job. Characteristics: White crepe paper...

Reference: TB-102

Rope insert tool length of the rope: 9m (pour bus et poids lourds)

Rope insert tool.For the replacement of non-bonded windshields with rubber mouldings.The toll is delivered with a very resistant rope, the length of which (6 m) is enough. Can be used with private cars and trucks.

Reference: TB-415

Locking strip tool with 5 interchangeable eyelets

Locking strip tool With the 5 different eyelets and the pressure roller, this locking strip tool can install pratically all different types of locking strips.- 160 x Ø 25 mm - 215 g

Reference: TE-125

Torx t80 for arms of windshield pullers

This very wide piece is recommended for windshield removal on the BMW 5 and BMW 7 series.- 35 x 18 x 18 mm - 38 g

Reference: THH-540

Telescopic bonnet holder

Telescopic bonnet holder Keeps the bonnet or hatch open at any desired angle. Telescopic bonnet holder tepless adjustable from 54 to 120 cm.

Reference: TKS-100

Trapezoid blades

Trapezoid blades. In a pratical dispenser. Our replacement blades for utility knives are 0,6 mm thick, so they are very sturdy. These blades are in a safety dispenser with a suspension hook so as to avoid any risk of injury. You take new blades by sliding them out from the above side of the dispenser while youdispose of the worn out blades by sliding them...

Reference: TQ-1438

Angular scraper blades (x10) 16mm-53°

Angular scraper blades (x 10) 16 mm - 53° • Package 10 pcs The angular scraper blades facilitate the scraping of old urethane from the corners of the pinchweld.

Reference: TRI-176

Triangular wire - 0.85mm - 50ML

REF. TRI-176Triangular wire.0,85 x 0,85 mm,Length : 50 metersTensile strength : 691 Newton

Reference: TSA-ADAPT

Brand: L'ULTRAPOSE

Articulated arm for ULTRAPOSE BUS

Please note that the TSAD-ADAPT should not be used at the same time as the TSAD-VIS You can therefore adapt the TS-ADAPT with the TS-RALLONGE in order to dismantle the assembly easily.

Reference: TS-KITMOTORISE

Brand: L'ULTRAPOSE

Motorized kit with remote control

Reference: TS-RALLONGE

Brand: L'ULTRAPOSE

Extension arm

For easier removal of the TS-RALLONGE, we recommend our TS-ADAPT, which has a quick-release pin.

Reference: TS2016

GLASS SETTING/LIFTING TOOL FOR BUS AND TRUCKS

ULTRA-POSE BUS IS ADAPTED FOR THE REMOVAL AND INSTALLATION OF VERY LARGE WINDOWS BY A SINGLE OPERATOR (trucks, subways, buses, panoramic roofs...) ADVANTAGES Gearing system can be operated manually or with a screwdriver Wheel lock for straight forward and backward movement Foldable for easy transport and storage 1 person only to load and unload it from a...

Reference: TSAD-VIS

Brand: L'ULTRAPOSE

Adaptor arm for TS3500

Please note that the TSAD-VIS should not be used at the same time as the TSAD-ADAPT

Reference: TSP-292

Protective foam for bodywork (set of 2)

Effectively protect your vehicle in tight spaces with our bodywork protection foam. Ideal for parking garages or workshops where cars are parked very close together and are difficult to move. Characteristics: Dense rubberized foam: One side is made of dense rubberized foam that provides optimal protection against impacts and scratches. Flexible suction...

Reference: ULB-582

TRAPEZOIDAL BLADES (x 10 )

Trapezoidal blades ( x 10 )

Reference: ULTRAPOSE1

ULTRAPOSE 1 - Windshield installation and removal tool for a single operator

The UltraPose1 tool from VBSA – An innovative solution for installing windshields The UltraPose1 is a revolutionary tool designed for installing and removing windshields, rear windows, and panoramic roofs on most vehicles. Designed for single-operator use, it offers unparalleled time savings, safety and comfort during workshop operations. - New feature –...

Reference: V54

VBSA 14.4V battery-powered gun

Designed for extruding standard 310 ml cartridges and 400 ml cartridges, it ensures smooth, controlled and effortless application. Main features: Compatible with 310 ml cartridges and 400 ml cartridges Supplied complete: 3.0 Ah Li-ion battery, fast charger (1 hour), carrying case Weight with battery: 2.75 kg Speed variator: precise adjustment on the...

Reference: VB05305

Door panel clips - CITROEN

CITROEN: Berlingo, Xsara, C 3, C 5, C 8, C 2, C 4, Xsara ll Sold in bags of 10 Type: Panel stop Color: White Material: Nylon Polyamide PA6

Reference: VB05305

Door panel clips - PEUGEOT

PEUGEOT: 206, 306, 406, 307, 607, 407, 807, 1007, 207, Ranch, 308 Sold in bags of 10 Type: Panel stop Color: White Material: Nylon Polyamide PA6

Reference: VB05305

Door panel clip - RENAULT

RENAULT : Scenic Sold in bags of 10 Type: Panel stop Color: White Material: Nylon Polyamide PA6

Reference: VB10011

Plastic cage nuts bay grille - PEUGEOT

PEUGEOT - All types of vehicles Sold in bags of 10 Plastic nuts for sheet metal screws - N°9

Reference: VB3106002

BODYSIDE TRIM CLIPS - SKODA

MOULURES ET BANDEAUXSold in packs of 10 VW - SKODA

Reference: VB10431

Windshield glass clip - PEUGEOT

PEUGEOT: 106 - 206 - 306 - 1007 Sold in packs of 10 Type: Windshield glass Fixing Color: Grey

Reference: VB1102002

WS-CLP A-PILLAR WHITE - OPEL

OPEL Astra G (98-04) - WS-Clip A-pillar white Sold in packs of 10 REF-VB1102002 ( x 10 ) n°27 Weight: 0.001 kg

Reference: VB1102003

WS-CLIP A-PILLAR GREY - OPEL

OPEL Astra G (98-04) - WS-Clip A-pillar greySold in packs of 10 REF-VB1102002 ( x 10 ) n° 20 Weight: 0.001 kg

Reference: VB1102005

WS-FASTENER WATERPANEL - OPEL

OPEL Astra H & Astra GTC (04-09) - WS-Fastener waterpanel whiteSold in packs of 10 REF-VB1102005 Staple for wipers motor cap ( x 10 ) n°28 Weight: 0.0018 kg

Reference: VB4000701

DISTANCE WEDGE - OPEL

DISTANCE WEDGE, Black, N°79 OPEL Omega A (86-93), Corsa C (00 -06)Sold in packs of 10 REF-VB1102007Poids: 0.004 kg

Reference: VB4000801

WS-SPACER SEL-ADHESIVE - OPEL

Spacer, self-adh., transparent, 56 pcs.   Sold in packs of 56Agila A (00-07)Astra H & GTC(04-09)Astra H GTC(05-09)Astra G (98-04)Corsa C (00-06)Corsa D (06-)Fontera I (91-98)Frontera B(99-04)Vectra B (95-02)

Reference: VB11079

WINDSCREEN APERTURE - RENAULT

Sold in packs of 10

Reference: VB11085

CLIP COWL AIR INTAKE GRID - RENAULT

Sold in packs of 10

Reference: VB11370

WINDSCREEN MOULDING - RENAULT

VITRAGE - MOULURE DE PARE-BRISESold in packs of 10 Renault MODUS