• Banner

  • Banner

There are 248 products.

Showing 1-100 of 248 item(s)
Active filters

Reference: CS-RC14

Handable rolling Tool-box

REF-CS-RC14HANDABLE ROLLING TOOL-BOX :Technicians in the windshield installation reach some difficultiesdue to a lack of space during the work. Cart trolleys are difficultto carry out of the van. For this reason, VBSA is offering a newhandable rolling tool box which include not only the specificproducts for glass replacement but also general purpose...

Reference: 3007-K

UltraWiz® cold knife

Fully-adjustable cold knife. The only one available on the market today. Pull on the lever to release the blade, push down on the lever to block the blade (at any height). To exchange the blade, you do not need to unscrw the screw nut anymore, so you do not waste time anymore. With this new very handy knife, you really save time.

Reference: 3008-K

UltraWiz® cold knife

Softer, thinner compared to the 3007-K. The grip on the handle looks closer to a standard cold knife. So now you can choose between the 3007-K and the 3008-K.(recommended for people with small hands.)

Reference: AB10

9 mm snap-off blades for ol30 knives

9 mm Snap-off blades forOL30 knives (Package of 10 pieces) Olfa®knife Standard knives with a wide 18mm blade are generally too wide to accomplish fine jobs. With its retractable blade of 9mm wide, this knife allows a fine cutting with one hand. - 85 x 9 x 0,4 mm - 38 g (Package of 10 pieces)

Reference: AC1006

Drop Jaw Glass pliers

REF-AC1006For those of you who are cutting glass or getting ready to start,we are offering both of the most popular glass pliers used inthe Auto Glass industry. Our straight Jaw glass pliers measure20 cm length and have a flared jaw that goes from 1,27 cm atthe swivel to 2,54 cm at the tip. They are cast from steel andthen machined to a smooth finish in...

Reference: AD1007

Drop Jaw Glass pliers

REF-AD1007For those of you who are cutting glass or getting ready tostart, we are offering both of the most popular glass pliersused in the Auto Glass industry. Our Drop Jaw Glass pliersare more massive, measuring 22,8 cm long, and they have anose that flares from 1,27 cm to 2,54 cm at the nose.• Length : 20 cm Drop jaw

Reference: AF1009

Self oiling glass cutter

REF-AF1009Self oiling glass cutterDue to the translucent color, you can see how much oil is inthe cutter. It has an end cap with a seal so the oil will not leakfrom the end of the cutter.They are of the highestquality and havebecome one of themost-used glass cuttersin the world.• Sold individually

Reference: AG1010

Cutting oil

REF-AG1010Cutting oilWe also have cutting oil for these cutters.It is an odorless, synthetic lubricant specifically formulatedfor self –oiling cutters. Non-corrosive and water-soluble foreasy cleanup– 120 ml free Oil filler with each glass cutter

Reference: AIG-125

T-handles wire threader

Just lay the wire in the notched tip and pass it through the polyurethane by pushing the tool from the inside to the outside.In the way, you can release the window. Always place the flat surface of the wire threader on the window, so that the hollow tube is not deformed.- 120 x 26 x 10 mm - 20 g

Reference: AIG-300

Wire guide

The wire guide's long, narrow shaft allows positioning the wire so it prevents the dash and interior mouldings from being damaged. Recommended above all for cars with a high windshield slope or with a bottom window bond that is hardly accessible. Of course, the wire guide can also be used from the outside.- 350 x 38 x 38 mm - 220 g

Reference: AIG-730

T-handles wire threader

Just lay the wire in the notched tip and pass it through the polyurethane by pushing the tool from the inside to the outside.In the way, you can release the window. Always place the flat surface of the wire threader on the window, so that the hollow tube is not deformed.- 120 x 26 x 10 mm - 20

Reference: AIG-789

Straight wire threader

Many technicians remove windshields by starting the wire through the top and bottom center of the windshield, then cutting towards each side. So as to push the cutting wire into the urethane, especially where there is a wide surface of urethane, we recommend using the wire threader. The slot (1,2 mm only) and the cutting wire are pushed together into the...

Reference: AP-6205

Tool declipsor

Tool declipsor SPRINGERTOOL The distinct precision curvature of the Springer Clip Removal Tool provides a varaible load distribution, safely moving the load point along the tool as more leverage is applied The tapered tip allows entry under closely fitted parts and the rounded edges avoid damage to the trim or vehicle. No matter a body shop you will be...

Reference: AST-120

Telescopic magnet

Telescopic magnetWhen you work above all in the door or chassis frame of the vehicle, a screw may fall and it may be impossible to pick it up with your fingers. With this telescopic magnet, you no longer have this problem. The telescopic device is extendable from 12 (corresponding to the size of a ballpoint pen ) to 60 cm. The strong magnet is capable to...

Reference: BOB-1.5-ROLL-OUT

Round wire in a spool REPAREGLASS - ø 0,80 mm, 1500 ml

Round wire in a spool The round profile and the small diameter make this wire a real problem solver for todays cars with narrow gaps between glass and body. It has the same high tensile strength than the VKD-44but offers at the same time as much lower risk to damage interior linings and dashboards.679 Newtonø 0,80 mm, 1500 ml

Reference: ROLL-OUT-2000

ROLL OUT Cutting tool

Windscreen cutting kitThis cutting tool allows to one operator only to cut outwindshields from inside the car.Supplied with DVD training and complete informations.

Reference: CCR-819

EQUALIZER® cowling clip removal tool

EQUALIZER® cowling clip removal tool If expension-type cowling worked the way they were designed, you would simply unscrew the plastic screw and the clip would come out. Unfortunately, they seldom work correctly. Our cowling clip removal tool has a small sharp screw that screws into the plastic head and pulls the screw out. The clip will then collapse and...

Reference: CG-200NEW

Pneumatic cut-out

Designed to easily and rapidly remove windsheilds, it cuts the bond with oscillating blades. It is characterized by a speed control thanks to its adjuster. Blades can be put in 12 different positions. Easy to handle in narrow places. Can also serve as scraper (Delivered with one blade and one wrench).

Reference: CG-200-GVF

Pneumatic cut-out + 6 blades

Designed to easily and rapidly remove windsheilds, it cuts the bond with oscillating blades. It is characterized by a speed control thanks to its adjuster. Blades can be put in 12 different positions. Easy to handle in narrow places. Can also serve as scraper (Delivered with one wrench).Pneumatic cut-out + 6 blades (FB-076 x 2 / FB-079 x 2 / FB-081 x 2)

Reference: CGE-148

Clip removal tool

Clip removal tool This tool is used to remove plastic clips on door linings. It fits easily down into the recessed area and then can slid under the head of the cowling clip. You then pull up on the center locking part and the clip can be removed. - 235 x 35 x 30 mm - 165 g

Reference: CM-536

Magnetic bowl

Magnetic bowlThe bowl can be placed almost everywhere on a vehicule because the bottom has a rubber cover to avoid scratches. The strong magnet surely holds thebowl itself and all magnetic content.Diameter:140 mm

Reference: CS-696

Clipsaver door upholstery remover

EQUALIZER® ClipSaver door upholstery remover The front of the tool is tapered so it will fit easily under a clip. Spread the jaws slightly so they will go under and around the clip. Then, close the jaws and it removes the clip without damaging it. Great for the removal of door panels. - 230 x 76 x 51 mm - 205 g

Reference: CTD-607

Recessed Cowling Clip Remover

Recessed Cowling Clip RemoverSome self-locking cowling clips are recessed down into the cowling. They are not the type that look like a Phillips or TORX®screw, but are the type that can be removed with a tool like the CGE-148. The only problem is the TPE657 will not reach downinto the recessed area and go under the head of the clip. If you manage to force...

Reference: CZ-444

Clip-Zip clip removal tool

Clip-Zip clip removal toolUsed to remove door panels clips and interior moulding clips. Simply slide the jaws of the tool under the head of the clip and squeeze down on the handle. The clip will be removed with ease from the panel or the body.- 220 x 90 x 33 mm - 205 g

Reference: DLH-511

Double-end moulding release tool

Double-end moulding release tool This heavy-duty tool is made of steel so it will not bend. It has a small rubber spacer through each end to the tool up off the glass about 1 mm. This is important for two reasons. First, it prevents the tool from scratching the glass. Secondly, it holds the end above the glass so there is less chance the tip will catch...

Reference: DPO-585

Rivet Stem Remover

Rivet Stem Remover It is often necessary to remove dor glasses without breaking them. Drilling out the rivet so you can remove the door glass is easy if you can remove the rivet stem. Rivet stems are made of steel and are impossible to drill out. Our rivet stem remover has contoured end so it will sit over the rivet and align perfectly with the rivet...

Reference: DST-734

T-handle wire threader with hole

REF-DST-734 T-handle wire threader with hole Just lay the wire in the notched tip and pass it through the polyurethane by pushing the tool from the inside to the outside.In the way, you can release the window. Always place the flat surface of the wire threader on the window, so that the hollow tube is not deformed.120 x 26 x 10 mm • 20 g

Reference: DST-734BUS

T-handle wire threader special bus and trucks

Special wire threader for bus and trucks with 2 holes ( for square or braided wire and nylon wire.) The end of the needle has a special designed in order to introduce easy the wire through the urethane. Push it in the urethane, insert the wire inside the tube, remove the wire threader and lead the wire throughout the urethane, in order to be able to pic...

Reference: ECL784

EQUALIZER® cutting lubricant

EQUALIZER® Lubrifiant de Coupe Adapté à tous les appareils de coupe Equalizer®. Pour réduire la friction entre la lame et le fourreau de nos appareils de coupe EQUALIZER® nous recommandons d'utiliser ce produit lubrifiant. Moins de friction signifie découpe facilitée et plus rapide, avec moins de chaleur dégagée, donc moins de salissement par le...

Reference: EEB793

EQUALIZER® blade 100mm

EQUALIZER® blades and sheathsEQUALIZER® blade 100mmThe blade is made of unbreakable mild steel.In case the blade bends,use pliers to straighten it up. Use a bech grinder, a strip sander, a file or a whetstone. You do not need to remove the blade to sharpen it. Our blades are made of specific material.Their round edges prevent them from being bent inside...

Reference: EEB795

EQUALIZER® blade 200 mm

EQUALIZER® blades and sheathsEQUALIZER® blade 200 mmThe blade is made of unbreakable mild steel.In case the blade bends,use pliers to straighten it up. Use a bech grinder, a strip sander, a file or a whetstone. You do not need to remove the blade to sharpen it. Our blades are made of specific material.Their round edges prevent them from being bent inside...

Reference: EEB797

EQUALIZER® blade 300 mm

EQUALIZER® blades and sheathsEQUALIZER® blade 300 mmThe blade is made of unbreakable mild steel.In case the blade bends,use pliers to straighten it up. Use a bech grinder, a strip sander, a file or a whetstone. You do not need to remove the blade to sharpen it. Our blades are made of specific material.Their round edges prevent them from being bent inside...

Reference: ESB1304

EQUALIZER® blade 100 mm

EQUALIZER® blade 100mm.Serrated blades and sheathsThese patented blades are made of spring steel and specifically designed for our tools. They are sharpened with a unique double-serration method. Each serration is also serrated. this sharpening method gives our EQUALIZER® blades a smoother and faster cutting action than ever before. These blades will fit...

Reference: ESB1308

EQUALIZER® blade 200 mm

Serrated blades and sheathsEQUALIZER® blade 200 mmThese patented blades are made of spring steel and specifically designed for our tools. They are sharpened with a unique double-serration method. Each serration is also serrated. this sharpening method gives our EQUALIZER® blades a smoother and faster cutting action than ever before. These blades will fit...

Reference: ESB1312

EQUALIZER® blade 300mm.

EQUALIZER® blade 300mm.Serrated blades and sheathsThese patented blades are made of spring steel and specifically designed for our tools. They are sharpened with a unique double-serration method. Each serration is also serrated. this sharpening method gives our EQUALIZER® blades a smoother and faster cutting action than ever before. These blades will fit...

Reference: FSC-300SPECIAL

Brand: REPAREGLASS

Special scraper

REF. FSC-300SPECIALSCRAPER (without blade)To scrape the old urethane bead. This scraper is universal due to thefact it can accept different blades width ( 13 mm – 16 mm – 20 mm)and angular blades

Reference: FSC-350

Brand: REPAREGLASS

Special scraper

REF. FSC-350SCRAPER (without blade)To scrape the old urethane bead. This scraper is universal due to thefact it can accept different blades width ( 13 mm – 16 mm – 20 mm)and angular bladesIts locking system with roll allow a quick and easy blade replacement

Reference: FSC1.7

FEIN electric knife

The powerful oscillator for the vehicle industry. Ideal for removing bonded panes and carrying out vehicle repairs. Anti-vibration system. Up to 70% fewer vibrations as the external motor housing is completely separate. For permanently safe working. 450 Whigh-power motor with high copper content for outstanding cutting speeds and maximum work progress,...

Reference: FSC1.7L

FEIN electric knife + 12 blades

Fein electric knife + 9 blade: - with tool box and accessories- more lightweight- more refined- easy and rapid replacement of the wrench- speed adjuster-knife -BLADE REF-FB212 x2-BLADE REF-FB207 x3-BLADE REF-FB208 x1-BLADE REF-FB209 x1-BLADE REF-FB157 x1-BLADE REF-FB111 x1

Reference: FSL240

Pinchweld scraper with interchangeable blade

Pinchweld scraper with interchangeable bladeThis may be the last pinchweld scraper you will ever buy! From now on.You may just buy blades. When the blade finally wears out, remove the two screws, pull out the old blade, drop in a new blade and tighten the two screws. These pinchweld scrapers are made of spring steel and are hard enough so they will not...

Reference: FT01826

Self oiling glass cutter

ONE OF THE MOST BOOKED KNIVESIN THE WORLD ! REF. FT-01826Self oiling glass cutterSteel cutting wheel angled at 130° and has a steel Ball end• Sold individually• Length : 13 cm

Reference: FTL-402-NEW

Replacement bulb

Replacement bulbAscrew has been lost?There is a leak in the engine compartment?Aconnector is hidden under the dash?This mini torch with flexible shaft will give you theneeded light in dark or hidden places.It can even become one of the most useful tools to you. Needs two LR6/ AM3/AAbatteries (delivered without bat-teries).

Reference: GCC-506

Glass run channel cleaner

Glass run channel cleanerIf you have ever cleaned glass out of a glass run channel, you know the problem. Broken pieces of tempered glass will hide behind the lip of the glass run chanel and scrape the door glass when you roll it up or down. The glass run channel cleaner reaches behind that lip to remove even the most stubbornly-wedged pieces of glass...

Reference: GS-410

Extendable glass scraper

EXTENDABLE GLASS SCRAPERThis extandable scraper allows to access easily in the tight zones.The tool has a storage compartment for blades in its handle ( Oneplastic razor blade – Type JPB391 , and one stainless steel bladetype RK100A delivered.)REF. GS-410

Reference: H1

Long Olfa®

Olfa® knifeKnife with a snap-off blade, 25 mm and 0,7 mm wide.The blade can be outside its housing up to a length of 10 cm and a thumb locking screw allows you to lock the blade in any position.Back of the knife features a rubber grip that lets the knife rest comfortably in your hand and keeps it from slipping.- 172 x 34 x 25 mm - 155 g

Reference: JCS452

Compact C-clip remover

Compact C-clip removerC-clip removers are an item that every technician has inhis toolbox, but those C-clips removers will not alwaysfit into the tight spots and compound curves on somevehicles. The Compact C-clips remover has a flat designthat will let you use it from all sides. This handy tool isdefinitely one that no technician should be without.REF....

Reference: JPB391

Plastic razor blades

Plastic razor bladesThese plastic razor blades are suitable to remove stickers andlabels from glass surfaces.As the blade is made of plastic it cannot scratch the glass contraryto a metal blade that could.Box of 100 blades