VBSA awarded ECOVADIS label
Banner
The Equalizer Ninja and Ninja GT are revolutionary auto glass removal tools that allow you to remove any glass fast and effortlessly. They have the look and feel of a cold knife, but cut with the power of 22,000 cutting strokes per minute. Here is how they work: the blade moves back and forth at
22,000 strokes per minute. As you pull the Equalizer Ninja forward, it is retracting and then thrusting
into the urethane at an astonishing rate of 367 times a second. Jobs that took several minutes now take
only seconds with now strain on your body. A unique feature is Ninja GT’s ability to cut under hoods,
trunk lids, or anything that hangs over the glass and obstructs your ability to cut. When you encounter
a hood, visor or trunk lid, you can position the blade around so it sits at a 90° angle. This makes the
tool short enough to go under these areas.
- 365 x 275 x 125 mm 2.110 g
The kit contains :
REF-ENJ147 - 1 Special air-powered knife, air consumption: 115l/min, air coupling (raccord dair) R1/4"
REF-ENT840 - 2 Cutting blade. Length: 19mm
REF-ENO841 - 3 Cutting blade. Length: 25mm
REF-ENL842 - 2 Cutting blade. Length: 38mm
REF-ENK148C - Padded carrying case 345 x 265 x100mm
BE CAREFUL: Ninja blades have been elaborated to fit on the Ninja knife.
They should not be used with other knives.
The Equalizer Ninja and Ninja GT are revolutionary auto glass removal tools that allow you to remove any glass fast and effortlessly. They have the look and feel of a cold knife, but cut with the power of 22,000 cutting strokes per minute. Here is how they work: the blade moves back and forth at |
EQUALIZER® Ninja standard kit
€0.00 |
|
cutting blade. lenght: 19mm |
cutting blade. lenght: 19mm
€0.00 |
|
Cutting blade. Length: 25mm |
Cutting blade. Length: 25mm
€0.00 |
|
Cutting blade. Length: 38mm |
Cutting blade. Length: 38mm
€0.00 |
The Equalizer Ninja and Ninja GT are revolutionary auto glass removal tools that allow you to remove any glass fast and effortlessly. They have the look and feel of a cold knife, but cut with the power of 22,000 cutting strokes per minute. Here is how they work: the blade moves back and forth at
22,000 strokes per minute. As you pull the Equalizer Ninja forward, it is retracting and then thrusting
into the urethane at an astonishing rate of 367 times a second. Jobs that took several minutes now take
only seconds with now strain on your body. A unique feature is Ninja GT’s ability to cut under hoods,
trunk lids, or anything that hangs over the glass and obstructs your ability to cut. When you encounter
a hood, visor or trunk lid, you can position the blade around so it sits at a 90° angle. This makes the
tool short enough to go under these areas.
- 365 x 275 x 125 mm 2.110 g
The kit contains :
REF-ENJ147 - 1 Special air-powered knife, air consumption: 115l/min, air coupling (raccord dair) R1/4"
REF-ENT840 - 2 Cutting blade. Length: 19mm
REF-ENO841 - 3 Cutting blade. Length: 25mm
REF-ENL842 - 2 Cutting blade. Length: 38mm
REF-ENK148C - Padded carrying case 345 x 265 x100mm
BE CAREFUL: Ninja blades have been elaborated to fit on the Ninja knife.
They should not be used with other knives.
Reference: ENJ147
The Equalizer Ninja and Ninja GT are revolutionary auto glass removal tools that allow you to remove any glass fast and effortlessly. They have the look and feel of a cold knife, but cut with the power of 22,000 cutting strokes per minute. Here is how they work: the blade moves back and forth at22,000 strokes per minute. As you pull the Equalizer Ninja...
Reference: ENT840
cutting blade. lenght: 19mm- 56 x 30 x 19 mm 40 gBE CAREFUL: Ninja blades have been elaborated to fit on the Ninja knife. They should not be used with other knives.
Reference: ENO841
Cutting blade. Length: 25mm - 60 x 30 x 25 mm 45 gBE CAREFUL: Ninja blades have been elaborated to fit on the Ninja knife. They should not be used with other knives.
Reference: ENL842
Cutting blade. Length: 38mm- 55 x 30 x 38 mm 50 gBE CAREFUL: Ninja blades have been elaborated to fit on the Ninja knife.They should not be usedwith other knives.
Reference: ROLL-OUT-2000
Windscreen cutting kitThis cutting tool allows to one operator only to cut outwindshields from inside the car.Supplied with DVD training and complete informations.
Reference: RAPTOR
The Raptor™ is a cord and wire auto glass removal device designed from the ground-up to dramatically improve the power of the vacuum cup with the integration of our AirForce™ Constant Vacuum Cups. This technology has been specifically developed to create a quick placement and constant vacuum to the glass so the Raptor™ stays in place and resists...
Reference: ENT840
Lame à découper de 19 mm de longueur- 56 x 30 x 19 mm 40 gATTENTION : Les lames Ninja sont étudiées pour aller spécialement sur le couteau Ninja, elles ne sont pas faites pour aller sur d'autres couteaux.
Reference: ESB1304
Lames et Fourreaux dentelés EQUALIZER ® Lame 100 mm Les nouvelles lames en dents de scie EQUALIZER ® sont fabriquées avec des dents en acier et sont affûtées d'une manière unique à double dentelure. Cette méthode d'affûtage donne à nos nouvelles lames EQUALIZER ® une coupe plus lisse et plus performante. Ces lames équiperont chaque outils EQUALIZER ® :...
Reference: ENJ147
Couteaux pneumatiques pour la coupe à froidL’Equalizer Ninja est un nouveau couteau pour découper absolument révolutionnaire qui peut être mis en oeuvre sur tous les modèles de véhicules. Au premier abord, on ne voit en lui qu’un simple appareil conventionnel pour la coupe à froid, mais avec la puissance que luiconfèrent ses 22.000 oscillations par...
Reference: ESB1312
Lames et Fourreaux dentelés EQUALIZER ® Lame 300 mm Les nouvelles lames en dents de scie EQUALIZER ® sont fabriquées avec des dents en acier et sont affûtées d'une manière unique à double dentelure. Cette méthode d'affûtage donne à nos nouvelles lames EQUALIZER ® une coupe plus lisse et plus performante. Ces lames équiperont chaque outils EQUALIZER ® :...
Reference: EES808
Equalizer® Fourreaux Le fourreau, système unique breveté, constitue l’originalité même de l’EQUALIZER®. Formé d’un manchon protecteur, il entoure la lame, évitant ainsi toute détérioration du revêtement du tableau de bord et des garnitures. Les fourreaux existent dans trois tailles différentes, 10, 20 et 30 cm. La plus petite taille est utilisée le plus...
Reference: EES812
Equalizer® Fourreaux Le fourreau, système unique breveté, constitue l’originalité même de l’EQUALIZER®. Formé d’un manchon protecteur, il entoure la lame, évitant ainsi toute détérioration du revêtement du tableau de bord et des garnitures. Les fourreaux existent dans trois tailles différentes, 10, 20 et 30 cm. La plus petite taille est utilisée le plus...
Reference: EGK150
Le Ninja™ GT est une version renforcée du Ninja™. Elle dispose de deux roulements à billes, d'un moteur plus puissant et d'un silencieux d'échappement qui achemine l'air qui s'échappe à l'écart du véhicule. Il possède une capacité unique à couper sous les capots, les couvercles de coffre et tout ce qui surplombe la vitre et obstrue votre capacité à...
Reference: ENL842
Lame à découper de 38 mm de longueur- 55 x 30 x 38 mm 50 gATTENTION : Les lames Ninja sont étudiées pour aller spécialement sur le couteau Ninja, elles ne sont pas faites pour aller sur d'autres couteaux.
Reference: EES804
Equalizer® Fourreaux Le fourreau, système unique breveté, constitue l’originalité même de l’EQUALIZER®. Formé d’un manchon protecteur, il entoure la lame, évitant ainsi toute détérioration du revêtement du tableau de bord et des garnitures. Les fourreaux existent dans trois tailles différentes, 10, 20 et 30 cm. La plus petite taille est utilisée le plus...
Reference: ENO841
Lame à découper de 25 mm de longueur- 60 x 30 x 25 mm 45 gATTENTION : Les lames Ninja sont étudiées pour aller spécialement sur le couteau Ninja, elles ne sont pas faites pour aller sur d'autres couteaux.
The Equalizer Ninja and Ninja GT are revolutionary auto glass removal tools that allow you to remove any glass fast and effortlessly. They have the look and feel of a cold knife, but cut with the power of 22,000 cutting strokes per minute. Here is how they work: the blade moves back and forth at
22,000 strokes per minute. As you pull the Equalizer Ninja forward, it is retracting and then thrusting
into the urethane at an astonishing rate of 367 times a second. Jobs that took several minutes now take
only seconds with now strain on your body. A unique feature is Ninja GT’s ability to cut under hoods,
trunk lids, or anything that hangs over the glass and obstructs your ability to cut. When you encounter
a hood, visor or trunk lid, you can position the blade around so it sits at a 90° angle. This makes the
tool short enough to go under these areas.
- 365 x 275 x 125 mm 2.110 g
The kit contains :
REF-ENJ147 - 1 Special air-powered knife, air consumption: 115l/min, air coupling (raccord dair) R1/4"
REF-ENT840 - 2 Cutting blade. Length: 19mm
REF-ENO841 - 3 Cutting blade. Length: 25mm
REF-ENL842 - 2 Cutting blade. Length: 38mm
REF-ENK148C - Padded carrying case 345 x 265 x100mm
BE CAREFUL: Ninja blades have been elaborated to fit on the Ninja knife.
They should not be used with other knives.
