VBSA awarded ECOVADIS label
Banner

Dispenser for BOB-CHAM or BOB-FIBRE cleaning paper - Seconde Life - N270

Reference DEV-BOB-CHAM-N270

In very good condition

Only a few minor cosmetic flaws - 1 Only one item available

2nd LIFE warranty: 6 months

Make it easier to use your wiper rolls with this sturdy and practical dispenser, designed to hold BOB-CHAM and BOB-FIBRE rolls. Ideal for workshop use, it ensures a smooth and controlled distribution of hand towels while guaranteeing quick and hygienic access.

Characteristics:

Compatible with BOB-CHAM and BOB-FIBRE rolls
Strong and stable: designed for intensive use
Easy to install and use
Delivered without roll

Please log in to your account to display prices

Quantity

Accessoires indispensables

	Wadding cleaning paper PEFC certification, PEFC Label. Suitable for food contact Controlled consumption thanks to sheet-by-sheet distribution. Sheet dimensions: 340 x 257 mm - perforated. Roll length: 350 m Diameter of the roll: 30 cm Grammage: 2 x 19g/m². Pack of two rolls of 1000 sheets = 2000 sheets Sold in sets of 2 rolls Supplied without supports	Cleaning paper made of cellulose wadding (2 rolls of 1000 sheets) €0.00
	Ecological wiping spool 100% recycled product Milk carton ECOLOGICAL WIPING SPOOL MADE OF CELLULOSE FIBRES PACK OF 2 ROLLS OF 1000 SHEETS Advantages: No discoloration No delamination or linting More absorbent than chamois rolls Raw material: cellulose fibre Sheet size: 220x300mm Roll length: 300m Diameter: 28cm Grammage: 18.5 ±1g Sold in sets of 2 rolls	Cleaning towels « Ecological » 100% recycled product Milk carton €0.00

Product Details

Product Details

Reference DEV-BOB-CHAM-N270

Glue remover and before painting cleaner 5L for bodywork cleaning

Warning: Do not use as an activator or windshield cleaner. CKW-free silicone remover - free from chlorine derivatives. Fast-drying surface cleaner that completely removes silicone, grease and oil before painting vehicles. Before painting, it easily removes sanding dust, mastics, undercoats and films of oil and grease (which form silicone), to provide a...

Microfiber for windows and polishing at VBSA France

Reference: CHAMB

Microfiber for glass and polishing 40 x 40 cm

The microfiber for windows and polishing 40 x 40 cm is the ideal tool for high-precision cleaning applications. With its composition of 70% polyester and 30% polyamide, this high-tech microfiber offers exceptional performance for cleaning car windows and polishing automotive surfaces. It is an effective replacement for traditional chamois leathers and...

Foam windshield and window cleaner. Mosquito remover. For industry, automotive and construction at VBSA - France

Reference: 768

Foam window / windshield cleaner 768 - Mosquito repellent

Effectively remove traces of oil, insects and dust with the foam-based 768 glass/windscreen cleaner. Ideal for use in industry, the automotive sector and construction, this product ensures impeccable cleanliness of glass surfaces. Characteristics: Powerful action: Dissolves traces of oil, insects and dirt in an instant Multi-purpose: Suitable for...

Universal cleaner for surface treatment without alcohol - 1 Litre - Windshield Bonding by VBSA - France

Reference: DEG-ADA

Universal cleaner for alcohol-free surface treatment - 1 Liter

Universal cleaner for alcohol-free surface treatment. For use in the decontamination process when applying windshield or other bonding. Can also be used as a solvent for applications of sound deadening products. Sold individually in 1L bottle or in box of 12.

Solvent-based cleaner for adhesion-activating windshield bonding - VBSA France

Reference: 520-30

520 cleaner for windshield bonding preparation

Solvent-based cleaner with adhesion-activating properties for pre-treating direct bonded pro windshields, Single-application wipe-off. Various packaging options: 30ml bottle - Ref.520-30 - Sold individually or in boxes of 25 250 ml bottle - Ref.520-250 - Sold individually or in boxes of 12 1L bottle - Ref.520-1 - Sold individually or in boxes of 12...

Talc-free and latex-free elastic and stretch Nitrile gloves, VBSA Protection France

Reference: CC-1058

NITRILE elastic and stretch gloves (NON-POINTED)

Our nitrile gloves provide an excellent biological barrier while guaranteeing optimal comfort thanks to their elasticity and stretchability. Designed without latex, they reduce the risk of allergies while providing effective protection against viruses and chemicals. Powder-free, they minimize the risk of contamination and are suitable for environments...

Pre-impregnated towels with silicone decontaminant for windshields and hands from VBSA - France

Reference: PB-1349

Silicone decontaminant pre-impregnated towels for windshield and hands

Clean and decontaminate effectively with our pre-impregnated wipes specially designed to remove glue, grease, silicone and other impurities. Features: Highly effective: Removes polyurethane, grease and dirt Multi-purpose: Cleans hands, tools, workbenches and toolboxes Silicone decontamination: Ideal for preparing a windshield before installation Pleasant...

Reference: F1-250

F1 transparent activator cleaner for F1K and F1FC windshield bonding

F1 cleaner activator can only be used with our F1FC and F1K Windshield Bonding. Apply a single coat with a felt applicator, then wipe clean with a dry lint-free cloth or cleaning towel (BOB-FIBRE or BOB-CHAM). Sold individually or in box of 12

Reference: BOB-CHAM

Cleaning paper made of cellulose wadding (2 rolls of 1000 sheets)

Wadding cleaning paper PEFC certification, PEFC Label. Suitable for food contact Controlled consumption thanks to sheet-by-sheet distribution. Sheet dimensions: 340 x 257 mm - perforated. Roll length: 350 m Diameter of the roll: 30 cm Grammage: 2 x 19g/m². Pack of two rolls of 1000 sheets = 2000 sheets Sold in sets of 2...

Wall-mounted reel dispenser to hang on workbench grid - VBSA France

Reference: DEV1MUR

Wall-mounted reel dispenser - workstation storage

Optimize the organization of your workspace with our wall-mounted metal spool dispenser, designed to easily hang your paper towel rolls or other consumables on your workbench grid. Robust and durable, it withstands daily wear and tear and ensures practical and efficient storage. Thanks to its easy installation, it allows you to keep your accessories...

Reference: SU1423

PB-1349 wall-attached towel holder

Optimize your workspace with this wall-mounted wipe holder, designed for quick and convenient access to wipes REF-PB-1349 (box not included). Features: Easy wall mounting: Ideal for use in the workshop or garage Compatible with wooden racks: Can be installed on our dedicated supports Secure hold: Keeps the box of wipes firmly in place and always within...

Workshop workbench with steel top - VBSA France

Reference: ETABLI-183

Workshop workbench with drawers and metal top

Workshop workbench with steel top (without grid, without wood top and without accessories) Discover our workshop workbench with drawers and steel top, ideal for safely storing your DIY tools and accessories. Drawer colors may vary according to availability. Product specifications:- Dim. L: 183cm - W :73cm - H:89cm OPTION n°1: REF-GRILLE-180- Perforated...

Steel wall grille for workshop workbench. For hanging various accessory brackets - VBSA France

Reference: GRILLE-180

Wall frame panel with perforated steel

Option n°1 for workshop workbench: - Perforated steel wall panel with neon compartment (neon not included)- Dim. L: 180cm - W: 90cm

Reference: BOB-FIBRE

Ecological cleaning paper made of cellulose biber - 100% recycled Milk carton ( 2 rolls of 1000 sheets)

Ecological wiping spool 100% recycled product Milk carton ECOLOGICAL WIPING SPOOL MADE OF CELLULOSE FIBRES PACK OF 2 ROLLS OF 1000 SHEETS Advantages: No discoloration No delamination or linting More absorbent than chamois rolls Raw material: cellulose fibre Sheet size: 220x300mm Roll length: 300m Diameter: 28cm Grammage: 18.5 ±1g Sold in sets...

Black nitrile protective gloves (powder-free), thick, special for miscellaneous repairs at VBSA - France

Reference: BLACKNIT

Black protective nitrile gloves (powder-free), thick, special for various repairs

Give your hands optimum protection with our powder-free black nitrile gloves, designed for professional, all-purpose use. Recommendations for use : Store in a cool, dry place, away from excessive heat (maximum temperature: 40°C). Open tin to be protected from UV rays and direct exposure to sunlight. Packaging: Sold in boxes of 100 pieces, ideal for...

Carbon fiber microfiber at VBSA - France

Reference: MICRO-CARBON

Carbon fiber microfiber - glass cleaning - pack of 5

Optimize your cleaning with our carbon fiber microfiber, designed for a flawless result on windows without leaving streaks or residue. Thanks to advanced carbon fiber technology, this ultra-soft microfiber effectively captures dust, dirt and fingerprints, while eliminating traces of water and cleaning products. Washable and reusable, it guarantees...

Reference: LA-200

Steel wool for removes difficult marks from all types of glass and inox parts

Steel wool specially designed to remove difficult marks from all types of glass (e.g. paint mist, whitish solvents, glue residues, etc.). DO NOT USE ON VEHICLE MIRRORS (rear-view mirrors) Can be used to improve adhesion to screen printing. Use dry. Blow well after use to remove metal dust. FOR WINDOWS : - removes light scratches - cleans dirt without...

30 other products in the same category:

Reference: VP-230-N321

Piston Suction Cup Ø 230 mm – Lifting Capacity 380 kg - Second Life - N321

In very good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Heavy-Duty Piston Suction Cup Ø 230 mm – Lifting Capacity up to 380 kg Looking for a reliable suction cup for heavy glass handling? Our Ø 230 mm piston suction cup is engineered for professionals who demand maximum lifting...

Reference: CGE-148-N145

Clip removal tool This tool is used to remove plastic clips on door linings - Second Life - N145

In good condition Only a few minor cosmetic defects appear - 1 Only one item available 2nd LIFE guarantee: 6 months Clip removal tool This tool is used to remove plastic clips on door linings. It fits easily down into the recessed area and then can slid under the head of the cowling clip. You then pull up on the center locking part and the clip can be...

Reference: VP-230SPECIALE-N330

Piston suction cup Ø 230 mm - Load capacity 350 kg - Highly curved windshield - Second VIE -N330

In very good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Ø 230 mm Piston Suction Cup – For Heavy Loads and Curved Glass Surfaces Designed for handling very heavy loads up to 350 kg, this professional Ø 230 mm suction cup is ideal for working with highly curved glass, such as bus...

Ball-tipped hook, with short shaft - Second LIFE - N147 at VBSA - France

Reference: CROR-S-N147

Brand: REPAREGLASS

Ball-tipped hook, with short shaft - Second LIFE - N147

In good condition Only a few minor cosmetic flaws - 1 Only one item available 2nd LIFE warranty: 6 months 210 x 35 x 35 mm • 122 g Ball-tipped hook, with short shaft

Reference: PSL-150-1-N73

Reinforced suction cup for windshield - 2nd LIFE - sold individually - N73

Suction cup in average condition - Please note, sold individually Cosmetic defects shown in the photos are present - Only one item available 2nd LIFE warranty: 6 months Reinforced suction cup for windshields, sold individually Load capacity: 80 kg. High-quality handle, optimal grip on curved glass. • Sold individually • Load capacity: 80 kg. • Ø 150 mm...

Single suction cup N670 - 2ème VIE - Load capacity: 80 kg at VBSA - France

Reference: PSH-120-1-N70

Single suction cup N70 - 2ème VIE - Load capacity: 80 kg

Suction cup in very good condition - Please note: sold individually Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months The suction cup allows you to lift a window pane that is ready to be installed safely (2 are required). The edge of the window pane must not be touched after it has been prepared...

9620 REPARBRISE® aluminium injection bridge for PB repair - 2nd LIFE - N87 Windscreen repair | VBSA | France

Reference: 9620-N87

Brand: REPARBRISE

9620 REPARBRISE® aluminum injection bridge for PB repair - Seconde LIFE -N87

In good condition Only a few minor cosmetic defects appear - 1 Only one item available 2nd LIFE guarantee: 6 months The 9620 REPARBRISE® injection bridge is a sturdy aluminum support designed to ensure precise resin injection during windshield repairs. It is compatible with the 3200 manual injector and the 994 vacuum/pressure injector, offering great...

Reference: PORTIQUE-N189

2 in 1 Glass cradle for panoramic roof and windshield applications - Seconde LIFE - N189

General operation: RAS Only cosmetic defects shown in the photos are present - 1 Only one unit available 2nd LIFE warranty: 6 months 2-IN-1 GANTRY FOR PANORAMIC ROOF OR SPACE-SAVER old generation Gantry for installing and removing panoramic roofs with 2 operators. Very easy to use. It is equipped with 4 side-adjustable suction cups for greater comfort...

Reference: VP-230SPECIALE-N333

Piston suction cup Ø 230 mm - Load capacity 350 kg - Highly curved windshield - Second VIE -N333

Reference: DEV-BOB-CHAM-N271

Dispenser for BOB-CHAM or BOB-FIBRE cleaning paper - Seconde Life - N271

In very good condition Only a few minor cosmetic flaws - 1 Only one item available 2nd LIFE warranty: 6 months Make it easier to use your wiper rolls with this sturdy and practical dispenser, designed to hold BOB-CHAM and BOB-FIBRE rolls. Ideal for workshop use, it ensures a smooth and controlled distribution of hand towels while guaranteeing quick and...

Reference: VP-230SPECIALE-N336

Piston suction cup Ø 230 mm - Load capacity 350 kg - Highly curved windshield - Second VIE -N336

Average condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Ø 230 mm Piston Suction Cup – For Heavy Loads and Curved Glass Surfaces Designed for handling very heavy loads up to 350 kg, this professional Ø 230 mm suction cup is ideal for working with highly curved glass, such as bus...

Reference: VP-230SPECIALE-N328

Piston suction cup Ø 230 mm - Load capacity 350 kg - Highly curved windshield - Second VIE -N328

In good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Ø 230 mm Piston Suction Cup – For Heavy Loads and Curved Glass Surfaces Designed for handling very heavy loads up to 350 kg, this professional Ø 230 mm suction cup is ideal for working with highly curved glass, such as bus...

Tool for removing windscreen wipers 2nd LIFE - N143 Windshied removal - VBSA - France

Reference: ZAW-010-N143

Wiper puller for bolted-on wipers - Second Life - N143

Tool in very good condition. Only a few cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Tool for removing windscreen wipers. For front windscreen wipers that are mounted with screws and nuts. As the wiper blades on modern vehicles are longer, the wiper arms are fixed more securely in order to...

Reference: AEB405-N194

Pneumatic knife: Equalizer® EXCALIBUR® DELUXE - 2nd LIFE - N194

Kit in good condition. The case may be incomplete (blades). Only cosmetic defects shown in the photos are present. Only one item available. 2nd LIFE warranty: 6 months Recommended for cutting the lower parts of the windscreen, rear windows and quarter windows. Cutting the interior of the vehicle. Compact and lighter, it is even easier to handle,...

Reference: VP-230SPECIALE-N335

Piston suction cup Ø 230 mm - Load capacity 350 kg - Highly curved windshield - Second VIE -N335

Reference: VP-230SPECIALE-N337

Piston suction cup Ø 230 mm - Load capacity 350 kg - Highly curved windshield - Second VIE -N337

Mirror Reparbrise Plexiglas Windshield impact repair - Second Life - N36 at VBSA - France

Reference: 945-N36

Brand: REPARBRISE

Square mirror REPARBRISE (Plexiglass) - Second Life - N36

Mirror in transition state Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Reparbrise 945 Plexiglas square mirror for repairing windscreen impacts. This mirror allows you to view the impact throughout the repair process. Dimensions: 9.5cm x 9.5cm

Pressure vacuum pump for REPAR'VIT Senior 1320 kit - -2nd LIFE - N32 at VBSA - France

Reference: 993-N32

Brand: REPARBRISE

Pressure vacuum pump for REPAR'VIT Senior 1320 kit - -2nd LIFE - N32

Pump in very good condition. Only a few cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Vacuum pump delivered with hose ref.996 (quick connector on injector side and direct connection on pump) The pressure vacuum pump is used to assist the repair of the impact on your windshield, by creating an air...

Reference: PSL-150-1-N72

Reinforced suction cup for windshield - 2nd LIFE - sold individually - N72

Reference: VP-230-N319

Piston Suction Cup Ø 230 mm – Lifting Capacity 380 kg - Second Life - N319

In good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Heavy-Duty Piston Suction Cup Ø 230 mm – Lifting Capacity up to 380 kg Looking for a reliable suction cup for heavy glass handling? Our Ø 230 mm piston suction cup is engineered for professionals who demand maximum lifting power,...

Reference: AEB405-N195

Pneumatic knife: Equalizer® EXCALIBUR® DELUXE - 2nd LIFE - N195

51 REPAREGLASS® injection bridge for windshield repair - Seconde LIFE - N18 for windshield repair | VBSA | France

Reference: 51-N18

Brand: REPAREGLASS

51 REPAREGLASS® injection bridge for windshield repair - Seconde LIFE - N18

In good condition Only a few minor cosmetic flaws - 1 Only one item available 2nd LIFE warranty: 6 months The REPAREGLASS® 51 injection bridge is an essential support for professional windshield repairs. Designed to hold the 3200 injector firmly in place, it allows for precise and stable injection of resin directly into the impact area. Compatible with...

Reference: KIT-POLIGLASS-BAT-N156

Battery Scratch removal kit - POLIGLASS - Second Life - N156

General operation: RAS This kit has been used several times, so there are fewer consumables - Visible signs of wear - Only one item available 2nd LIFE warranty: 6 months Battery Scratch removal kit - POLIGLASSKIT-POLIGLASS-BAT VBSA present his polisher which allows removing different kinds of scratches (windshields, side-windows, windows) caused from the...

Mirror Reparbrise Plexiglas Windshield impact repair - Second Life - N38 at VBSA - France

Reference: 945-N38

Brand: REPARBRISE

Square mirror REPARBRISE (Plexiglass) - Second Life - N38

Reference: 969-N101

Large probe for impact repair - 2nd LIFE - N101

Good condition. Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months The large probe is an essential tool for windshield repair professionals. It allows for perfect centering of the impact area, ensuring optimal resin injection. Its size and precision facilitate work on complex impacts, for...

Reference: DEV-BOB-CHAM-N272

Dispenser for BOB-CHAM or BOB-FIBRE cleaning paper - Seconde Life - N272

2-in-1 roof rack for panoramic roof or windscreen - 2nd LIFE - N190 at VBSA - France

Reference: PORTIQUE-N190

2 in 1 Glass cradle for panoramic roof and windshield applications - Seconde LIFE - N190

General operation: RAS Only cosmetic defects shown in the photos are present - 1 Only one unit available 2nd LIFE warranty: 6 months 2-IN-1 GANTRY FOR PANORAMIC ROOF OR SPACE-SAVER new generation Gantry for installing and removing panoramic roofs with 2 operators. Very easy to use. It is equipped with 4 side-adjustable suction cups for greater comfort...

Tool for removing windscreen wipers 2nd LIFE - N108 Windshied removal - VBSA - France

Reference: ZAW-010-N108