VBSA awarded ECOVADIS label
Banner
Charger - Charge maintenance (50 A) for total maintenance of WET, GEL, AGM, MF, PbCa, EFB and Li batteries with voltages ranging from 6/12V to 24V.
Warning: not compatible with MEGA MAC REMONTE
Its innovative technology guarantees the best performance in this field, up to 50% better than traditional battery chargers.
Its Pulse technology guarantees optimal battery charging in 8 phases.
- Automatically charges and maintains batteries with technology even in difficult environmental conditions (low temperatures)
- Supports 6/12/24V batteries (all technologies)
- Diagnostic mode for ECU analysis activities (Geometry, HELLA GUTMANN, adaptation, on-line coding, reprogramming, ECU updates), requiring stability and power.
- Keeping the batteries of the demonstration vehicles on display in the showrooms in good health
- Reliable power source for safe battery changes (back-up of on-board electronics)
- Revolutionary recovery of sulphated or heavily discharged batteries and restoration of optimum characteristics with periodic regeneration
- Battery tester, displays terminal voltage, starting capacity (CCA) and checks the operation of the vehicle's alternator;
- Booster mode | helps vehicles start when the battery is discharged
Based on SMPS (Switch Mode Power Supply) technology. In the event of power cuts or repeated use, the CH50A can restore the last settings made. Numerous protections available. Equipped with a PFC device.
| Supply voltage | 220-230 V |
| POWER ABSORBED ON LOAD | 600 W |
| CHARGING VOLTAGE | 6 / 12 / 24 V |
| EFFECTIVE LOAD CURRENT | 45 / 45 / 23 A |
| COUR. CHARGE CONV. EN60335-2-29 | 40 / 40 / 20 A |
| COUR.DEMARR. 1V/C EN60335-2-29 | 40 (Boost) / 70 (Start) A |
| CAPACITE' NOM. REFERENCE MIN. | 10 A |
| CAPACITE'NOM. REFERENCE MAX | 600 Ah |
| ADJUSTMENT POSITIONS | 7 |
| SIZE | 33 x 10 x 16 cm |
| WEIGHT | 3,7 kg |
Reference: 818-220V
USB 3.0 adapter charger - 5V = 2A (Max) INPUT: 100-240V - 50-60 Hz - 0.5A OUTPUT: 5V = 2A Compatible with our 1048-CABLEUSB cable, it can be used for our 818 windscreen heater, our 1048 LED UV lamp, our LAMPE-3 and our LAMPE-F headlamp.
Reference: ENROUL-DEV
Black metal wall-mounted dispenser. Wall-mounted, can be easily attached to a partition, workbench or wooden rack. Quick assembly, easy to use thanks to its tightening knob. Tube diameter between 2.5 and 3cm (diameter may vary slightly according to availability).
Reference: BMR-1488
Lever to unclip the side window frame for easy removal
Reference: KIT-VP-230-E
KIT consisting of a suction cup (REF.VP-230), 2 lithium batteries 3W- 3.7V (REF.VP-230-E-BAT) and a charger (REF.VP-230-E-CHARG). Diameter: 200mm, Flat suction cup, cannot be used on curved glass. Ideal for flat windscreens such as lorries, buses, etc. Standard suction= 160kg Maximum vertical suction = 180 kg Maximum horizontal suction= 200 kg Charger and...
Reference: ASP-2024-FLEXIBLE10M
Flexible hose length 10 M for hoover ASP-2024 Not compatible with ASP-1000 and ASP-2021
Reference: MBS
Our MBS cartridge preservative will enable you to store and preserve your opened windscreen glue, sealant or silicone cartridges in a hermetically sealed, dry environment that avoids any chemical fumes. How do I use it? Nothing could be simpler: - Insert the cartridge - Then place a filter containing moisture-absorbing silica gel beads on top. - Close...
Reference: MICRO-CARBON
A new carbon microfibre that cleans windows without leaving any residue, and leaves no fibre deposits. It's made from : - 60% rPET (recycled polyester), 20% carbon and 20% polyamide. Sold in bags of 5: Dimensions: 40 x 50cm
Reference: G-C0
Honey-coloured natural latex gloves with non-contoured cuff. Complies with European standard EN 60903: 2003 and international standard IEC 60903: 2002. Directive 89/686/EEC on personal protective equipment classifies insulating gloves for live working as category III (major risks - fatal or incapacitating). Resistance to low temperatures (-25°C),...
Reference: ADAPT-PBV
ADAPTER FOR VERTICAL OR INVERTED GLAZING Truck, bus, tractor, public works, combine harvester type.... The adaptor enables repairs to be carried out on vertical windscreens with a negative tilt of up to 20°. For use with injector 994, our 9620 bridge for TERMINATOR 1 and 2 cases, and 1320. Not compatible with FIX-2001, 2000, 367 and 51 bridges, cannot be...
Reference: 818-12V
12V cigar lighter charger compatible with charging cable 1048-CABLEUSB. Works with our UV-1048 lamp, our 818 windshield heater, our LAMPE-3 and our LAMPE-F headlamp.
Reference: KPM-4169
Dimension: 69 x 41 x 2,0 mm Version: DAF CF(2) / DAF LF(2) / DAF XF(2) / IVECO Stralis(2) / VOLVO FL(2) Color: Black Quantity: 5 pieces
