VBSA awarded ECOVADIS label
Banner
Suction cup in good condition - Please note: sold individually
Only cosmetic defects shown in the photos are present - 1 Only one item available
2nd LIFE warranty: 6 months
The suction cup allows you to lift a window pane that is ready to be installed safely (2 are required). The edge of the window pane must not be touched after it has been prepared for installation. To ensure that the window can be held securely, our suction cups have 30° joints that adapt perfectly to the concavity of the windows. Simply place the suction cups on the glass and press the levers down to create a vacuum. The window can now be transported safely.
The suction cups are made of extremely durable, fibre-reinforced plastic. Please note that these suction cups have been specially developed for use in the automotive industry.
REF. PSH-120
• Load capacity: 80 kg
• Ø 115 mm
390 x 236 x 100 mm
• 1,232 g
Pairof suction cups (Ø 120 mm) |
Pair of suction cups - Load capacity: around 80kg
€0.00 |
Reference: PSH-120
Pairof suction cups (Ø 120 mm)Vacuum cups allow you to hold safely a window that is ready to install. The edge of the window must not be touched once the window is ready for the installation. Each vacuum swivels up and down approximately 30° to fit radically contoured glass. Simply set the vacuum cups in place and push the thumb latches down to engage the...
Reference: 1046-N78
Brand: REPARBRISE
12V UV lamp with timer. To connect this lamp to a 230V mains supply, you just need to adapt our mini transformer Ref.512. General functioning: N/A This lamp has numerous scratches and signs of wear, as shown in the photos - 1 single item available SECOND LIFE guarantee: 6 months Caution: the maximum amperage of the replacement fuses is 2A. It is important...
Reference: 1046-N2
Brand: REPARBRISE
12V UV lamp with timer. To connect this lamp to a 230V mains supply, you just need to adapt our mini transformer Ref.512. General functioning: RAS Only aesthetic defects shown in the photos appear - 1 single item available SECOND LIFE guarantee: 6 months Caution: the maximum amperage of the replacement fuses is 2A. It is important to replace the UV neon...
Reference: ZAW-010-N123
Tool in average condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Tool for removing windscreen wipers. For front windscreen wipers that are mounted with screws and nuts. As the wiper blades on modern vehicles are longer, the wiper arms are fixed more securely in order to transmit...
Reference: CAISSE-N395
In very good condition Only a few minor cosmetic flaws - 1 Only one item available 2nd LIFE warranty: 6 months Storage case Length: 44cm - Width: 17cm - Height: 19cm
Reference: 1900-N164
Brand: REPARCHOC
Condition: fair - 1 item available 2nd LIFE warranty: 6 months Gun for 178 ml two-component cartridges for repairing plastics.
Reference: DESTOCK-1917-ULTRAPOSE-EVO
Brand: L'ULTRAPOSE
General condition: RAS ULTRAPOSE-EVOLUTION almost new, a few visible micro scratches - 1 Only one available 2nd LIFE warranty: 6 months This product has received significant recognition, having won the Bodywork of the Year 2017 award, which is a testament to its quality and innovation in the field. This system has several features and advantages that...
Reference: PORTIQUE-N189
General operation: RAS Only cosmetic defects shown in the photos are present - 1 Only one unit available 2nd LIFE warranty: 6 months 2-IN-1 GANTRY FOR PANORAMIC ROOF OR SPACE-SAVER old generation Gantry for installing and removing panoramic roofs with 2 operators. Very easy to use. It is equipped with 4 side-adjustable suction cups for greater comfort...
Reference: KRD2-N161
General operation: OK KRD2 has been used several times, so there are fewer consumables, the nozzles have traces of glue, as does the gun - Visible signs of wear - Only one unit available Second Life warranty: 6 months The REPAR'BOS KRD2 kit is specially designed for bodywork professionals who want to effectively repair dents caused by hail or minor...
Reference: CAISSE-N396
In very good condition Only a few minor cosmetic flaws - 1 Only one item available 2nd LIFE warranty: 6 months Storage case Length: 44cm - Width: 17cm - Height: 19cm
Reference: 1046-N186
Brand: REPARBRISE
12V UV lamp with timer. To connect this lamp to a 230V mains supply, you just need to adapt our mini transformer Ref.512. General functioning: N/A This lamp has numerous scratches and signs of wear, as shown in the photos - 1 single item available SECOND LIFE guarantee: 6 months Caution: the maximum amperage of the replacement fuses is 2A. It is important...
Reference: KIT-AZOTE-MAXI-N4
ATTENTION 1 device available With integrated generator No operating faults. Minor cosmetic defects in the form of scratches and lack of paintwork.
Reference: 366-N20
Brand: REPARBRISE
Condition: fair - 1 item available 2nd LIFE warranty: 6 months 366 REPAR'VIT® Senior injection bridge, designed to ensure precise resin injection during windscreen repairs.
Reference: 945-N85
Brand: REPARBRISE
Vacuum cleaner in good condition. Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Reparbrise 945 Plexiglas square mirror for repairing windscreen impacts. This mirror allows you to view the impact throughout the repair process. Dimensions: 9.5cm x 9.5cm
Reference: 993-N32
Brand: REPARBRISE
Pump in very good condition. Only a few cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Vacuum pump delivered with hose ref.996 (quick connector on injector side and direct connection on pump) The pressure vacuum pump is used to assist the repair of the impact on your windshield, by creating an air...
Reference: BOS8-N240
General operation: RAS Dent removal lamp used very little in commercial demonstrations, a few micro scratches visible - 1 Only one available 2nd LIFE warranty: 6 months The essential tool for accurate and efficient bodywork dent repair! Thanks to its reflection system, this lamp allows you to clearly visualize deformations, providing a precision guide for...
Reference: 1046-N7
Brand: REPARBRISE
12V UV lamp with timer. To connect this lamp to a 230V mains supply, you just need to adapt our mini transformer Ref.512. General functioning: RAS Only aesthetic defects shown in the photos appear - 1 single item available SECOND LIFE guarantee: 6 months Caution: the maximum amperage of the replacement fuses is 2A. It is important to replace the UV neon...
Reference: DEV-BOB-CHAM-N272
In very good condition Only a few minor cosmetic flaws - 1 Only one item available 2nd LIFE warranty: 6 months Make it easier to use your wiper rolls with this sturdy and practical dispenser, designed to hold BOB-CHAM and BOB-FIBRE rolls. Ideal for workshop use, it ensures a smooth and controlled distribution of hand towels while guaranteeing quick and...
Reference: ASP-MIL-N155
Vacuum cleaner in good condition. Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Powerful 18V motor with a maxmum ai flow of 1246 L / min / 80 bar suction power.HEPA rated 99.7% high efficienc wet / dry filter : for fine dust collectionBuilt-in blower : provides 21 L / sec of air flow for...
Reference: PSL-150-1-N73
Suction cup in average condition - Please note, sold individually Cosmetic defects shown in the photos are present - Only one item available 2nd LIFE warranty: 6 months Reinforced suction cup for windshields, sold individually Load capacity: 80 kg. High-quality handle, optimal grip on curved glass. • Sold individually • Load capacity: 80 kg. • Ø 150 mm...
Reference: CAISSE-N398
In very good condition Only a few minor cosmetic flaws - 1 Only one item available 2nd LIFE warranty: 6 months Storage case Length: 44cm - Width: 17cm - Height: 19cm
Reference: SD-22-N139
Functional rope, only cosmetic defects - 1 item available 2nd LIFE guarantee: 6 months Braided wire in a spool REPAREGLASS ø 0.80 mm, length: 22 m, Wound on a plastic spool. 1083 NEWTON The wire to be cut is twisted according to our exact specifications from three strong stainless steel wires. The wire is anodised in a typical "gold" colour.
Reference: CLIPS-AGRAFES-55PCS-N47
Sets of 55 various windshield clips and staples
Reference: 1046-N80
Brand: REPARBRISE
12V UV lamp with timer. To connect this lamp to a 230V mains supply, you just need to adapt our mini transformer Ref.512. General functioning: RAS Only aesthetic defects shown in the photos appear - 1 single item available SECOND LIFE guarantee: 6 months Caution: the maximum amperage of the replacement fuses is 2A. It is important to replace the UV neon...
Reference: 04200202-N230
Windshield table with suction cups, equipped with a storage kit for tools (sold without accessories or tools) General functioning: N/A Only aesthetic defects shown in the photos appear on this rack - 1 Only one available 2ND LIFE warranty: 6 months Size 115 cm x 182 cm x 88 cm Load capacity: 180 kg Windshield table with suction cups and tool storage kit....
Reference: 1046-N6
Brand: REPARBRISE
12V UV lamp with timer. To connect this lamp to a 230V mains supply, you just need to adapt our mini transformer Ref.512. General functioning: N/A This lamp has numerous scratches and signs of wear, as shown in the photos - 1 single item available SECOND LIFE guarantee: 6 months Caution: the maximum amperage of the replacement fuses is 2A. It is important...
Reference: 1046-N75
Brand: REPARBRISE
12V UV lamp with timer. To connect this lamp to a 230V mains supply, you just need to adapt our mini transformer Ref.512. General functioning: N/A This lamp has numerous scratches and signs of wear, as shown in the photos - 1 single item available SECOND LIFE guarantee: 6 months Caution: the maximum amperage of the replacement fuses is 2A. It is important...
Reference: 1048-N234
Brand: REPARBRISE
General operation: RAS Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Our new polymerisation lamp will save you a lot of time.... A whole lot of time! The resin will polymerise in just 50 seconds! Normally, with a traditional UV lamp, it takes 10 to 15 minutes to cure! But that's all over...
Reference: DESTOCK-1915-ULTRAPOSE-EVO
Brand: L'ULTRAPOSE
General condition: RAS ULTRAPOSE-EVOLUTION almost new, a few visible micro scratches - 1 Only one available 2nd LIFE warranty: 6 months This product has received significant recognition, having won the Bodywork of the Year 2017 award, which is a testament to its quality and innovation in the field. This system has several features and advantages that...
Reference: DESTOCK-1912-ULTRAPOSE-EVO
Brand: L'ULTRAPOSE
General condition: RAS ULTRAPOSE-EVOLUTION almost new, a few visible micro scratches - 1 Only one available 2nd LIFE warranty: 6 months This product has received significant recognition, having won the Bodywork of the Year 2017 award, which is a testament to its quality and innovation in the field. This system has several features and advantages that...
Reference: CGE-148-N145
In good condition Only a few minor cosmetic defects appear - 1 Only one item available 2nd LIFE guarantee: 6 months Clip removal tool This tool is used to remove plastic clips on door linings. It fits easily down into the recessed area and then can slid under the head of the cowling clip. You then pull up on the center locking part and the clip can be...
Suction cup in good condition - Please note: sold individually
Only cosmetic defects shown in the photos are present - 1 Only one item available
2nd LIFE warranty: 6 months
The suction cup allows you to lift a window pane that is ready to be installed safely (2 are required). The edge of the window pane must not be touched after it has been prepared for installation. To ensure that the window can be held securely, our suction cups have 30° joints that adapt perfectly to the concavity of the windows. Simply place the suction cups on the glass and press the levers down to create a vacuum. The window can now be transported safely.
The suction cups are made of extremely durable, fibre-reinforced plastic. Please note that these suction cups have been specially developed for use in the automotive industry.
REF. PSH-120
• Load capacity: 80 kg
• Ø 115 mm
390 x 236 x 100 mm
• 1,232 g
