Vacuum lifter Ø 230 mm

Reference: RL-170

Suction cup with handle diameter 70 mm

Suction cup with handle diameter 70 mmDurable quality suction cup. Adaptable on glass, marble, ceramic.Ideal to remove and install quarter glass.Loading capacity : 12 kgREF. RL-170Sold individually

Reference: VP-2075-DESTOCK

Piston suction cup - Load capacity 200kg - Ø 207 mm

Sold individually - delivered in a case

Reference: PSL-150-1VERIBOR

Veribor suction cup Ø 150 mm

VERIBOR SUCTION CUPREF-PSL-150-1VERIBOR• Ø 150 mm : Loading capacity : 80 kg

Reference: VSP-290

Window holders (forside windows)

Window holders (forside windows)Hold up the door glass while you work. Simply loop the cable over the door frame and attach the suction cups to each side of the glass.- 177 x 200 x 76 mm - 70 g

Reference: PSH-120

Pair of suction cups - Load capacity: around 80kg

Pairof suction cups (Ø 120 mm)Vacuum cups allow you to hold safely a window that is ready to install. The edge of the window must not be touched once the window is ready for the installation. Each vacuum swivels up and down approximately 30° to fit radically contoured glass. Simply set the vacuum cups in place and push the thumb latches down to engage the...

Reference: VP-205

Vacuum lifter Ø 205 mm

Vacuum lifter Ø 205 mm (in a plastic case)Bell-shaped rubber pad with multiple – seal lip. For optimum hold. To fix with the integrated vacuum pump. Red safety ring at the pump plunger enables optical monitoring of the vacuum. Load capacity for the lifter is 260 kgSold individually Delivered in a case

Reference: DESTOCK-PRP21

Piston automatique - Equalizer Powerpump

Reference: VP-230

Vacuum lifter ø 230

Vacuum lifter Ø 230 mm(in a plastic case) Bell-shaped rubber pad with multiple seal lip.For optimum hold, also on strongly curved glasssurfaces.To fix with the integrated vacuum pump.Red safety ring at the pump plunger enables optical monitoring of the vacuum. Load capacity for the lifter is 120 kgDelivered in a plastic case.

Reference: RTD-499

Pair of ratcheting tie downs - length: 5m

Pair of ratcheting tie downsRatcheting tie downs are used by glaziers to secure freshly bonded-in glasses.Use these ratcheting tie downs together with our suction cups so as to hold vertical-glazed glasses in place while the urethane cures. The ratcheting tie downs are simply passed through the handles of the vacuum cups and tight-ened.- 165 x 165 x 10 mm...

Reference: KIT-VP-230-E

Electric suction cup kit - Diameter 200mm

KIT consisting of a suction cup (REF.VP-230), 2 lithium batteries 3W- 3.7V (REF.VP-230-E-BAT) and a charger (REF.VP-230-E-CHARG). Diameter: 200mm, Flat suction cup, cannot be used on curved glass. Ideal for flat windscreens such as lorries, buses, etc. Standard suction= 160kg Maximum vertical suction = 180 kg Maximum horizontal suction= 200 kg Charger and...

Reference: PE24

Automatic plunger for suction cup

Sold on its own without the suction cup. Recharges via USB-C

Reference: MTF-183

copy of PINCHWELD PROTECTOR -60CM

Pinchweld protector - 60cm

Reference: JP135

Automatic vacuum cups JetPacks'"

JetPacks'" EQUALIZER vacuum cups were designed from the ground-up to eliminate the need for manual pumping. Turn on theJetPacks'", place them on the glass and let them handle the pumping. If the cup loses vacuum, AIR FORCE'" vacuum technology takes over and keeps that crucial suction going until the cup has maximum vacuum again. JetPacks™ has a 175mm...

Reference: VP-230-E-CHARG

Charger for automated suction cup VP-230-E

Charger for automated suction cup VP-230-E

Reference: 9005B

Dent suction cup

Dent suction cup. Grips very well on any surface (car body, glass, hood–).- Diameter: 115mm- Load capacity: 40kg- Sold individually

Reference: PSH-120-VERIBOR

Veribor suction cup pair Ø 120 mm

VERIBOR SUCTION CUP PAIR.REF. PSH-120-VERIBOR• Ø 120 mm : Loading capacity : 80 kg