Hose - Powerpush battery-operated pistol

Reference: PSL-150-1

Suction cup deluxe sold individualy (Ø 150 mm)

Suction cup deluxe sold individualy (Ø 150 mm)Easier and safer to attach that common suction lifters with clamp lever technology.The bell shaped rubber pads already adhere onto the glass surface with slight pressing even before pressing the lever.Possibility to pass a belt through. Load capacity for each lifter is 80 kg.

Reference: V-04200101NEW

Rubber plate new model

Rubber plate new model

Reference: 5026-400-14V-EU-N247

Powerpush Battery Gun Berlingots 400ml – 14V – Second life – N247

Brand new, still in its original box Only a few cosmetic defects shown in the photos – Only 1 unit available Second Life Warranty: 6 months Powerpush 14V Battery Gun The PowerPush gun is designed to deliver unmatched power and optimal efficiency, ensuring smooth and effortless application of PU in any situation. Powerclutch Transmission: Improves...

Reference: BATTERIE-18V

18V Lithium battery - 2 Ah and 5 Ah

Choose power and autonomy with our 18V Lithium batteries. Exceptional performance: Milwaukee batteries allow you to work in extreme conditions, in hot or very cold weather, down to -18°C. Electronics protected against water and dust infiltration, guaranteeing optimal longevity. Up to 2.5 times more autonomy, 20% more power and a twofold lifespan.

Reference: RACCORD1-4FEMELLE

Coupling for guns

This connector is designed to provide a quick, reliable, and leak-proof connection between your guns and your compressed air source. Made from robust and durable materials, it guarantees safe and optimal use in workshop conditions.

Reference: PWR-5063

Chargeur de batterie Milwaukee - 12 V et 18 V

This 18V charger is specially designed to efficiently recharge the batteries of your Milwaukee and PowerPush guns. Compatibility: 12V battery: PWR-5012 (2Ah), PWR-5013 (4Ah) 18V battery: PWR-5018 (2Ah), PWR-5021 (5Ah) Ensure maximum autonomy for your tools with this robust and high-performance charger.

Reference: V54-N523

VBSA 14.4V Cordless Gun - Second-hand - N523

General condition: No issues, Good condition Only the cosmetic defects shown in the photos are present - Only one unit available 2nde VIE Warranty: 6 months Designed for extruding standard 310 ml cartridges and 400 ml cartridges, it ensures smooth, controlled and effortless application. Main features: Compatible with 310 ml cartridges and 400 ml...

Reference: VSP-290

Pair of Suction Cups for Side Windows

his pair of suction cups is designed to hold the side window in the desired position during removal or adjustment operations. It allows the technician to work safely while keeping both hands free. Simply pass the tool cable over the vehicle door and attach the two suction cups to each side of the glass to ensure stable and reliable support throughout the...

Reference: GEZ-150-1

Set of vacuum lifter - -load capacity 30kg

Vacuum lifterØ 150 mm REPAREGLASSThese vacuum lifter have been specially designed for windsheild setting and removal.Their unique shape allows a good hand holding. The flowing shape and the smooth surface of the handles allow a greater control of large windows.To install a windshield, we ercommend beginning by doing a test. The setting of the windsheild...

Reference: VP-230SPECIALE-N338

Piston suction cup Ø 230 mm - Load capacity 350 kg - Highly curved windshield - Second VIE -N338

In good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Ø 230 mm Piston Suction Cup – For Heavy Loads and Curved Glass Surfaces Designed for handling very heavy loads up to 350 kg, this professional Ø 230 mm suction cup is ideal for working with highly curved glass, such as bus...

Reference: PSH-120-VERIBOR

Veribor suction cup pair Ø 120 mm

VERIBOR SUCTION CUP PAIR.REF. PSH-120-VERIBOR• Ø 120 mm : Loading capacity : 80 kg

Reference: VP-205-N353

Piston Suction Cup – Diameter 205 mm – Lifting Capacity 260 kg - Second Life - N353

Suction cup in very good condition - Please note: sold individually Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months SOLD INDIVIDUALLY – DELIVERED IN A CARRYING CASE This piston suction cup, with a 205 mm diameter, is specifically designed for heavy-duty lifting and handling. Its piston...

Reference: 9005B

Dent suction cup

Dent suction cup. Grips very well on any surface (car body, glass, hood–).- Diameter: 115mm- Load capacity: 40kg- Sold individually

Reference: NSE-KITTUBEB

Set of 6 wooden tubes for large wooden rack

Reference: 5013-4-961

Locking screw for handle - POWERPUSH battery-operated gun

Ensure the secure attachment of the handle of your POWERPUSH battery-operated pistol with this robust locking screw. Specially designed to hold the handle in place, it guarantees optimum stability during use, even under high pressure. Made of high-quality material, it offers increased durability and resistance. This screw is an essential element to keep...

Reference: VP-230SPECIALE

Piston suction cup Ø 230 mm - Load capacity 350 kg - Highly curved windshield

Ø 230 mm Piston Suction Cup – For Heavy Loads and Curved Glass Surfaces Designed for handling very heavy loads up to 350 kg, this professional Ø 230 mm suction cup is ideal for working with highly curved glass, such as bus windshields. Its built-in manual piston efficiently creates a vacuum, ensuring strong adhesion even on complex or curved surfaces. The...

Reference: NSE-BPM

WOODEN RACK FOR WINDSCREENS, QUARTER WINDOWS AND SMALL WINDOWS -6 COMPARTMENTS

Reference: RTD-499

Pair of ratcheting tie downs - length: 5m

Pair of ratcheting tie downsRatcheting tie downs are used by glaziers to secure freshly bonded-in glasses.Use these ratcheting tie downs together with our suction cups so as to hold vertical-glazed glasses in place while the urethane cures. The ratcheting tie downs are simply passed through the handles of the vacuum cups and tight-ened.- 165 x 165 x 10 mm...

Reference: PASTILLE-ROUGE

Plastic washer: Milwaukee 12V

Red plastic washer specially designed to adapt Milwaukee 12V gun for use with 400 ml and 600 ml cartridges. It ensures perfect compatibility and optimal hold of the cartridge in the gun, guaranteeing smooth and controlled extrusion of the product.

Reference: PWR-2019

MILWAUKEE Gun for saussages 400 ml + 600 ml, and cartridges 310 ml

18V Lithium Milwaukee cordless guns -Ejection pressure : 4500Nm -+ 20 % Speed -Upgrade performance up to 40 % compared to old version -Excellent for high viscosity PU -Red-Lithium Ion technology REF-PWR-2019: Gun for saussages 400 ml + 600 ml, and cartridges 310 ml

Reference: RT-550

Step ladder

Step ladderOpening size : 126 x 38 x 50 mmClose size : 95 x 30 x 33.5 mmFlat size : 95 x 30 mmLoading capacity : 150 KgsNet weight : 7.2 kgBrut weight : 8 kg

Reference: MICRO-CARBON

Carbon fiber microfiber - glass cleaning - pack of 5

Optimize your cleaning with our carbon fiber microfiber, designed for a flawless result on windows without leaving streaks or residue. Thanks to advanced carbon fiber technology, this ultra-soft microfiber effectively captures dust, dirt and fingerprints, while eliminating traces of water and cleaning products. Washable and reusable, it guarantees...

Reference: JU101

Universal mouldings • 9.5 mm x 22,8 m

Universal mouldingsExcellent forming and adhesion. Remain flexible even withlow temperatures. Butyl adhesive- No cracking, no weakness, no distorsion REF-JU101• 9.5 mm x 22,8 mFor T4 PLEASE ASK OUR KEYCHAIN SAMPLE WHICH WILL ALLOWS TO DISCOVEROUR UNIVERSAL MOULDING RANGE..Supplied with a detail list with many exemple of cars that cover.)

Reference: JU105

Universal mouldings • 16 mm x 22,8 m

Universal mouldingsExcellent forming and adhesion. Remain flexible even withlow temperatures. Butyl adhesive- No cracking, no weakness, no distorsion REF-JU105• 16 mm x 22,8 mFor T4 PLEASE ASK OUR KEYCHAIN SAMPLE WHICH WILL ALLOWS TO DISCOVEROUR UNIVERSAL MOULDING RANGE.Supplied with a detail list with many exemple of cars that cover.)

Reference: 1020-029

220V charger for 20V POWERPUSH (old gun)

This 220V charger is designed to be compatible with the POWERPUSH 20V models of our older guns, in particular the references 5026-400-20V-EU and 5026-600-20V-EU. It allows fast and reliable recharging, guaranteeing optimal performance for your tools without interruption. Ideal for keeping your POWERPUSH battery-operated guns always ready for use, this...

Reference: KANGOUROU

Body Panel Storage Stand – Professional Workshop Equipment

This body panel storage stand is designed to securely hold and organize removed vehicle parts such as doors, hoods, bumpers, and glass. Ideal for body shops and automotive glazing workshops, it improves workspace efficiency and safety. It allows safe storage of: doors hoods bumpers fenders automotive glass These supports help prevent damage and improve...

Reference: 9505140

Cutting pliers for universal joints

The KNIPEX rubber and universal joint cutter is a high-quality professional tool designed to cut various types of rubber joints easily and precisely. Its sturdy, ergonomic design makes for a comfortable grip and high precision when cutting. Ideal for bodybuilders, garages and other professionals who need to cut gaskets cleanly, these pliers are suitable...

Reference: PSI-200

Double nylon seat panel cover

Effectively protect the interior of your vehicles with this one-piece double seat cover, ideal for automotive professionals. Applications : Ideal for workshops, garages and car cleaning services. Also suitable for jobs requiring temporary protection of vehicle interiors.

Reference: STA668

Protection for trestles

PROTECTION FOR TRESTLESWho never thinked about replace its trestle foam ?We are offering our new neoprene fabric velcrostripwith sharkskin, made of 5 mm, with 5 cm wideNo need to remove the old covers, just wrap andsecure with the Velcro.REF. STA-668Sold individually ( 1 strip)Stand not include .Order 2 x STA-668 to protect one stand.Stand not include.

Reference: CSG245RP

Air-powered caulking gun 310ml cartridges and 400ml saussages.

This pneumatic gun is designed for the precise extrusion of 310 ml cartridges and 400 ml cartridges, offering glazing professionals a reliable and efficient solution for applying adhesives and sealants. It is equipped with an integrated control valve that allows precise control of the extrusion speed, ensuring clean, consistent, and effortless work....