VBSA awarded ECOVADIS label
Banner
USB-C charging cable compatible with our 818-220V and 818-12V chargers, can be used for our 818 windscreen heater, our 1048 LED UV lamp, our LAMPE-3 and LAMPE-F headlamps.
Reference: 818
The WINDSHIELD HEATER warms the repair area, usb powered, supplied with adapter + 5 thermometers Ref. 961 12v cigarette lighter and 220v mains, 2.5m cable, ideal for impact repairs, red or black depending on availability.
Reference: 1048
Brand: REPARBRISE
From 05.04.2024, our 1048 UV lamps will be equipped with a USB-C socket, so they will be supplied with a reinforced USB-C cable ref. 1048-CABLEUSBC and a charger ref. 818-220V.
Reference: LAMPE-3
Illuminate even the most confined workspaces with this sturdy and versatile magnetic LED lamp. Built to last, it offers powerful, dimmable brightness tailored to the needs of professionals. Technical specifications: Autonomy: 3H. Lumens: 200. Recharge: USB-C.
Reference: 818-220V
USB 3.0 adapter charger - 5V = 2A (Max) INPUT: 100-240V - 50-60 Hz - 0.5A OUTPUT: 5V = 2A Compatible with our 1048-CABLEUSB cable, it can be used for our 818 windscreen heater, our 1048 LED UV lamp, our LAMPE-3 and our LAMPE-F headlamp.
Reference: 818-12V
12V cigar lighter charger compatible with charging cable 1048-CABLEUSB. Works with our UV-1048 lamp, our 818 windshield heater, our LAMPE-3 and our LAMPE-F headlamp.
Reference: 184
Brand: REPAREGLASS
Booklet of special flexible plastic sheets for crack repair. Our Special Flexible Plastic Sheets are specially designed to cure the resin on the surface of the crack repair. Lay the sheet over the crack resin and then use a UV lamp to cure the crack repair on the windshield. Warning: not compatible with finishing resin.
Reference: FIX-5063-DESTOCK
Brand: REPAR'VIT
Aluminium screw for injection bridge 367, holds injectors 5095 and 5096 to the windshield to ensure a seal during resin injection.
Reference: 983
Brand: REPARBRISE
Seals (X2) for large impact adapter 946. It is important to change the seals regularly to ensure a good seal when injecting the Windshield Repair Resin.
Reference: DPG
It's imperative to test the calibration of your vacuum pump at minimum once a year, to ensure quality repairs for your customers. French Standard regulation NF R61-980... Frequency of use: once a year. This new regulation allows to ensure that the pressure and vaccum cycles made from the pump are correct ( Pressure tolerance is 0,1 Bar) in order to avoid...
Reference: 940
LED lighted mirror (glass) for repairing windshield impacts, this mirror allows you to visualise the impact throughout its repair, it has LED lighting. Size. 6.5cm x 4cm
Reference: 645
Brand: REPARBRISE
12V carbide drill supplied with integrated chuck lock, for drilling the impact point on your windshield before injecting the resin. Use with our 934, 4509w and 701 carbide drills. This drill can also be used with a felt for polishing the impact after repair. 4M cable extension
Reference: 949
Brand: REPARBRISE
Bottle of polish specially designed to polish the point of impact on your windshield, for a quality finish 60ml bottle
Reference: 770
Brand: REPARBRISE
Eliminates traces of oil, insects and dust. Used in industry, cars and construction. For cleaning windshields, windows and outside mirrors. Sold in 20L drums Also available - 750ml aerosol - Ref.768 and 5L drum - Ref.769
Reference: 951
Brand: REPARBRISE
REPARBRISE® is used and approved by a large number of car manufacturers. Discover our glazing repair kit, complete with all the tools and accessories you need to carry out quality repairs to your windscreen. Ideal for professionals.
Reference: 1330
Brand: REPAR'VIT
REPAR'VIT® is used for various types of impact repairs: Bubble impacts Impacts with star-shaped bubbles Spangled impacts cracks Discover our glass repair case, complete with all the tools and accessories you need to carry out quality repairs to your windscreen. Ideal for professionals.
Reference: 994
Brand: REPARBRISE
Injector allowing you to inject windshield repair resin using a pressure vacuum pump. Used in KIT-1320 - TERMINATOR 1 AND 2, fits perfectly with our vertical or reversed windshield adaptor ref. ADAPT-PBV. It is suggested that you also order the injector to avoid leaks due to wear of the seal: - To replace the seal in contact with the windshield, use ref....
Reference: RK-100A
These squeegee blades offer an effective solution for cleaning and preparing glass and plastic surfaces. Ideal for removing adhesive residues, paint or stubborn dirt, they guarantee precise, careful work without damaging delicate surfaces. These blades combine durability and safety. Their razor-sharp cutting edge ensures optimum use for all workshop...
Reference: FIX-2005
Brand: REPAR'VIT
Large impact resin filler injector for REF-2000 Ø 1.5 cm bridge.
Reference: 1320LED
Brand: REPAR'VIT
REPAR'VIT® is used and listed by a large number of car manufacturers. Meets AFNOR NF n° X5021 and REACH standards. Discover our glazing repair kit, complete with all the tools and accessories you need to carry out quality repairs to your windscreen. Ideal for professionals.
Reference: TER-CHARGEUR
Brand: TERMINATOR
Charger for TERMINATOR 1 AND 2 and ULTRAPOSE EVOLUTION kits. Connect the charger to your TERMINATOR or ULTRAPOSE EVOLUTION to recharge the battery.
Reference: 969
Large probe, for perfect centring of the repair and easier resin injection.
Reference: LR136
Brand: REPAREGLASS
Discover our injection resin for repairs to windshield impacts, a high-strength, long-lasting solution for restoring the transparency and strength of your car's glazing. (over 80 repairs). 15 ml bottle
Reference: 499
Cigar-lighter power strip. Allows you to recharge appliances such as UV lamps, drills, hoovers, etc. Ideal for buses and trucks.
Reference: 921N
Brand: REPARBRISE
Windshield injection resin supplied without injector. Discover our 921 injection resin for repairing windshield impacts, a high-strength, long-lasting solution for restoring the transparency and strength of your car windows. Our REPARBRISE resins comply with the AFNOR NF n°X50210 standard; on 01/01/87 and 30/09/2008 we passed the UTAC TEST European...
Reference: 818-12V
12V cigar lighter charger compatible with charging cable 1048-CABLEUSB. Works with our UV-1048 lamp, our 818 windshield heater, our LAMPE-3 and our LAMPE-F headlamp.
Reference: PACK-RESINES
WINDSHIELD REPAIR CONSUMABLES PACK REPARBRISE 15 to 20 REPAIRS! Our special windshield repair consumables pack includes a range of essential consumables for easy windshield repairs: - 3 x REF-921N REPARBRISE Resins (AFNOR & UTAC regulation no. 43 conform) - 1 x REF-3200 Injector - 1 x REF-943 Finishing resin - 1 x REF-948 pack of 5 Scraper blades -...
Reference: 634
Our 634 resin is specially designed to repair cracks in windshields quickly and effectively.
Reference: 818
The WINDSHIELD HEATER warms the repair area, usb powered, supplied with adapter + 5 thermometers Ref. 961 12v cigarette lighter and 220v mains, 2.5m cable, ideal for impact repairs, red or black depending on availability.
Reference: POSTER-1320
Windshield impact repair process poster - 1320 - 50x70cm Please do not hesitate to ask for some poster when you proceed to ordering Available for export only with a product order. No delivery possible on its own
Reference: FIX-2025
Brand: REPAR'VIT
Replacement piston for our bridges REF-2000, REF-367, REF-9620, and our suction cup REF-GEZ-543-1.
Reference: 994JOINT
Brand: REPAREGLASS
If you have problems with leaks on the top nozzle of the 994 injector, you will need to change the small black seal inside the 994CLAP plunger. Seal for 994CLAP plunger for 994 injector
Reference: FLEXI-BLADE
Flexible wiper blade made in silicone. Allow to ease the removal of the water from surface to be dried. Appliable on the glass and metal.
Reference: 3200
Brand: REPARBRISE
REPAIR injector composed of a high quality cylinder + piston. Composed of 5 lips which allow an additional depression and a faster repair. Adapts to our injection bridges ref.51 and 9620. To avoid any leaks due to seal wear, we recommend that you also order the interchangeable end caps ref 3202 when purchasing the injector.
Reference: 1046
Brand: REPARBRISE
12V UV lamp with timer To connect this lamp to the 230V mains, simply adapt our mini transformer Ref.512. Please note: the maximum amperage of the replacement fuses is 2A. It is important to replace the UV neon (ref.931) at a frequency defined in accordance with standard NF R61-980, i.e: Continuous operation for 15 hours or approximately 90 repairs....
Reference: M-TERMINATOR
Brand: TERMINATOR
TERMINATOR MACHINE ONLYContain: 1 terminator machine + 1 battery + 1 charger AUTOMATIC WINDSCREEN REPAIR SYSTEM The TERMINATOR motorised windscreen repair kit is an injection process with a motor. It is so intuitive that even someone who doesn't repair windscreens on a daily basis is able to carry out perfect repairs. The operator no longer has to stand...
USB-C charging cable compatible with our 818-220V and 818-12V chargers, can be used for our 818 windscreen heater, our 1048 LED UV lamp, our LAMPE-3 and LAMPE-F headlamps.
