Ø 0.9 cm Rubber seals for standard impact injector 5095 and FIX-2006

Reference: SATELLITEDEPONT

Satellite for windshield crack repair kit

Satellite for 3200 injector for manual injection of crack resin to repair cracks in windscreens (including rubber and leg protection).

Reference: 994CLAP

Brand: REPAREGLASS

Plunger for Injector Inox 994

Inox 994 injector plunger for windshield impact repair

Reference: HOS-2010

Rubber Seals (x2) for HOS-2000, HOS-2000-L, HOS-1000-T vacuum pump hoses

Set of 2 replacement rubber seals for HOS-2000, HOS-2000-L and HOS-1000-T hose It is important to change the rubber seals frequently to ensure that the windshield repair resin is injected correctly. The rubber seal is situated inside the connector on your hose. If there is a leak in the hose, you can change the seal by using a wrench and unscrewing the...

Reference: 959

Brand: REPARBRISE

Carbide-tip pen for windschield impact

Carbide-tipped pen, used to remove surface impurities on the impact before repairing it.

Reference: 931

Brand: REPARBRISE

Single 135 mm UV neon for 1046 and UVB-150 lamp

Single U.V. neon 135 mm - 931- for 1046 and UVB-150 lamp 

Reference: PEZ-120

Anti-skid roof/hood liner

Protect the paintwork on your vehicle's roof or hood when you're working on it, with our non-slip protective canvas. Ideal for bodybuilders and garages, it offers a practical and safe solution for fitting tools, screws and small assembly equipment without the risk of damaging the vehicle's surface. Dimensions and weight : Dimensions: 1720 x 700 x 2 mm....

Reference: 617

Cylinder vacuum nozzle

Cylinder vacuum nozzle. Removes air trapped in the impact. Supplied with specific hose without connection and a smaller diameter. (for use with the 3200 cylinder and 993 vacuum pump).

Reference: 1110

Brand: REPAR'VIT

Pressure vacuum pump for REPAR'VIT 1330 kit

The pressure vacuum pump 1110 is used to assist the repair of the impact on your windshield, by creating an air vacuum. This helps to remove air and impurities from the impact before injecting the resin. Alternating pressure vacuum/pressure with your pump will inject the resin uniformly into the impact.

Reference: 512

Miniature 220V/12V cigarette lighter voltage transformers

Miniature 220V/12V cigarette-lighter voltage transformers, for recharging equipment with a cigarette-lighter connector. Ex. UV lamp, drill, etc.

Reference: 940

LED lighting mirror (glass)

LED lighted mirror (glass) for repairing windshield impacts, this mirror allows you to visualise the impact throughout its repair, it has LED lighting. Size. 6.5cm x 4cm

Reference: 994JOINT

Brand: REPAREGLASS

Seal for 994CLAP plunger for 994 injector

If you have problems with leaks on the top nozzle of the 994 injector, you will need to change the small black seal inside the 994CLAP plunger. Seal for 994CLAP plunger for 994 injector

Reference: FIX-2006

Brand: REPAR'VIT

Standard resin filler injector for REF -2000 bridge

Standard resin filling chamber for REF-2000 bridge Ø 0,9 cm

Reference: 994

Brand: REPARBRISE

Injector for windshield repair resin for KIT-1320 - TERMINATOR 1 AND 2

Injector allowing you to inject windshield repair resin using a pressure vacuum pump. Used in KIT-1320 - TERMINATOR 1 AND 2, fits perfectly with our vertical or reversed windshield adaptor ref. ADAPT-PBV. It is suggested that you also order the injector to avoid leaks due to wear of the seal: - To replace the seal in contact with the windshield, use ref....

Reference: 993

Brand: REPARBRISE

Pressure vacuum pump for REPAR'VIT Senior 1320 kit

Vacuum pump delivered with hose ref.996 (quick connector on injector side and direct connection on pump) The pressure vacuum pump is used to assist the repair of the impact on your windshield, by creating an air vacuum. This helps to remove air and impurities from the impact before injecting the resin. Alternating pressure vacuum/pressure with your pump...

Reference: 945

Brand: REPARBRISE

Square mirror REPARBRISE (Plexiglass)

Reparbrise 945 Plexiglas square mirror for repairing windscreen impacts. This mirror allows you to view the impact throughout the repair process. Dimensions: 9.5cm x 9.5cm

Reference: 5BX-02010

Rubber seals Ø 1.5 cm for large impact injector 5096 and FIX-2005

Ø 1.5 cm seals for large impact injector 5096 and FIX-2005. It is important to change the seals regularly to ensure a good seal when injecting windshield repair resin. 1 bag of 5 pieces

Reference: FIX-2025

Brand: REPAR'VIT

Replacement plunger piston for injection bridge and suction cup

Replacement piston for our bridges REF-2000, REF-367, REF-9620, and our suction cup REF-GEZ-543-1.

Reference: RS-2030

Pack of 5 special resin injection syringes for windshield repairs

Resin dispenser pack consisting of 5 syringes and 3 needles. The RS-2030 syringe lets you remove the injection resin from the bottle or pipette and inject it into the injector. You can also use the syringe to fill drill holes and cracks in your windscreen.

Reference: 996

Brand: REPARBRISE

1M hydraulic connection hose for 993 pump

Connection hose with quick-fit connector (female on 1 side only) suitable only for 993 vacuum pump and 994 injector. Length: 1M

Reference: 645

Brand: REPARBRISE

12V carbide drill for impact drilling

12V carbide drill supplied with integrated chuck lock, for drilling the impact point on your windshield before injecting the resin. Use with our 934, 4509w and 701 carbide drills. This drill can also be used with a felt for polishing the impact after repair. 4M cable extension

Reference: HOS-2000-L

2.50M long connector hose for Bus and Truck for 1110 and PMP-ADVANTAGE pumps

Long connection hose for bus and truck, vans, trams, etc... compatible with 1110 and PMP-ADVANTAGE vacuum pumps, our 5095 and 5096 injectors. Used in our 1330 and 1330SPECIAL kits, not compatible with our 1320 and TERMINATOR 1 and 2 kits. Length : 2.50M

Reference: HOS-1000-T

2.50M vacuum pump connector hose for TERMINATOR 1 and 2 kits

Vacuum pump connector hose for TERMINATOR 1 and 2 kits - Ideal for repairing impacts on the Windshields of utility vehicles, trucks, buses, trams, etc....  Length: 2.50 M

Reference: 161

Brand: REPAREGLASS

Cigar lighter extension cable for battery

Extension cable for batteries. To put on the cigar lighter.

Reference: HOS-2002

Cleaning brush for injector 5069 or 5062

Nylon cleaning brush for injector 5069 or 5062 to clean excess injection resin from the windscreen

Reference: ADAPT-PBV

Adapter for vertical or reverse glazing

ADAPTER FOR VERTICAL OR INVERTED GLAZING Truck, bus, tractor, public works, combine harvester type.... The adaptor enables repairs to be carried out on vertical windscreens with a negative tilt of up to 20°. For use with injector 994, our 9620 bridge for TERMINATOR 1 and 2 cases, and 1320. Not compatible with FIX-2001, 2000, 367 and 51 bridges, cannot be...

Reference: FIX-2005

Brand: REPAR'VIT

Large impact resin filler injector for REF -2000 bridge

Large impact resin filler injector for REF-2000 Ø 1.5 cm bridge.

Reference: IFA-300

Infrared thermometer for glass temperature control

Infrared thermometer for checking the temperature on your Windshield. 

Reference: 983

Brand: REPARBRISE

Seals (X2) for large impact adapter 946

Seals (X2) for large impact adapter 946. It is important to change the seals regularly to ensure a good seal when injecting the Windshield Repair Resin.

Reference: HOS-2000

1M connector hose for 1110 pump and PMP-ADVANTAGE

Connection hose for vacuum pump 1110 and PMP-ADVANTAGE and injector 5095 or 5096 for windshield repair. Length: 1M

Reference: 985

Vaccum plug for suction of impact impurities

Vaccum plug to remove impurities from the windshield impact. Diameter 3cm The Vaccum plug is used with the vacuum pump ref.993.