Rubber seals Ø 1.5 cm for large impact injector 5096 and FIX-2005

Reference: HOS-2001

Nylon cleaning brush for HOS-2000 hose

Nylon cleaning brush for HOS-2000 connection hose, for cleaning excess windshield repair resin.

Reference: ADAPT-PBV

Adapter for vertical or reverse glazing

ADAPTER FOR VERTICAL OR INVERTED GLAZING Truck, bus, tractor, public works, combine harvester type.... The adaptor enables repairs to be carried out on vertical windscreens with a negative tilt of up to 20°. For use with injector 994, our 9620 bridge for TERMINATOR 1 and 2 cases, and 1320. Not compatible with FIX-2001, 2000, 367 and 51 bridges, cannot be...

Reference: DPG

Vacuum pump calibration tester for windshield repair

It's imperative to test the calibration of your vacuum pump at minimum once a year, to ensure quality repairs for your customers. French Standard regulation NF R61-980... Frequency of use: once a year. This new regulation allows to ensure that the pressure and vaccum cycles made from the pump are correct ( Pressure tolerance is 0,1 Bar) in order to avoid...

Reference: ISHP-BIG

Joints pour adaptateur pare-brise ADAPT-PBV - Lot de 10

Reference: FIX-5063-DESTOCK

Brand: REPAR'VIT

Aluminium screw for injection bridge 367

Aluminium screw for injection bridge 367, holds injectors 5095 and 5096 to the windshield to ensure a seal during resin injection.

Reference: 1110

Brand: REPAR'VIT

Pressure vacuum pump for REPAR'VIT 1330 kit

The pressure vacuum pump 1110 is used to assist the repair of the impact on your windshield, by creating an air vacuum. This helps to remove air and impurities from the impact before injecting the resin. Alternating pressure vacuum/pressure with your pump will inject the resin uniformly into the impact.

Reference: 931

Brand: REPARBRISE

Single 135 mm UV neon for 1046 and UVB-150 lamp

Single U.V. neon 135 mm - 931- for 1046 and UVB-150 lamp 

Reference: HOS-1000-T

2.50M vacuum pump connector hose for TERMINATOR 1 and 2 kits

Vacuum pump connector hose for TERMINATOR 1 and 2 kits - Ideal for repairing impacts on the Windshields of utility vehicles, trucks, buses, trams, etc....  Length: 2.50 M

Reference: 974

Special syringe for injecting resin to repair windshields

The syringe ref.974 will allow you to take the injection resin from inside the bottle or pipette and then inject it into the injector. You can also use the syringe to fill drill holes and cracks in your Windshield.

Reference: TER-CHARGEUR

Brand: TERMINATOR

Charger for TERMINATOR 1 AND 2 and ULTRAPOSE EVOLUTION kits

Charger for TERMINATOR 1 AND 2 and ULTRAPOSE EVOLUTION kits. Connect the charger to your TERMINATOR or ULTRAPOSE EVOLUTION to recharge the battery.

Reference: HOS-2000

1M connector hose for 1110 pump and PMP-ADVANTAGE

Connection hose for vacuum pump 1110 and PMP-ADVANTAGE and injector 5095 or 5096 for windshield repair. Length: 1M

Reference: HOS-2010

Rubber Seals (x2) for HOS-2000, HOS-2000-L, HOS-1000-T vacuum pump hoses

Set of 2 replacement rubber seals for HOS-2000, HOS-2000-L and HOS-1000-T hose It is important to change the rubber seals frequently to ensure that the windshield repair resin is injected correctly. The rubber seal is situated inside the connector on your hose. If there is a leak in the hose, you can change the seal by using a wrench and unscrewing the...

Reference: 818

Windshield heater for impact repair

The WINDSHIELD HEATER warms the repair area, usb powered, supplied with adapter + 5 thermometers Ref. 961 12v cigarette lighter and 220v mains, 2.5m cable, ideal for impact repairs, red or black depending on availability.

Reference: HOS-2000-L

2.50M long connector hose for Bus and Truck for 1110 and PMP-ADVANTAGE pumps

Long connection hose for bus and truck, vans, trams, etc... compatible with 1110 and PMP-ADVANTAGE vacuum pumps, our 5095 and 5096 injectors. Used in our 1330 and 1330SPECIAL kits, not compatible with our 1320 and TERMINATOR 1 and 2 kits. Length : 2.50M

Reference: 3200

Brand: REPARBRISE

REPARBRISE Injector: Cylinder + piston for injection of windshield repair resin

REPAIR injector composed of a high quality cylinder + piston. Composed of 5 lips which allow an additional depression and a faster repair. Adapts to our injection bridges ref.51 and 9620. To avoid any leaks due to seal wear, we recommend that you also order the interchangeable end caps ref 3202 when purchasing the injector.

Reference: PMP-ADVANTAGE

Brand: REPAR'VIT

Pressure vacuum pump for REPAR'VIT kit 1330SPECIAL and 1300

The pressure vacuum pump is used to assist the repair of the impact on your windshield, by creating an air vacuum. This helps to remove air and impurities from the impact before injecting the resin. Alternating pressure vacuum/pressure with your pump will inject the resin uniformly into the impact.

Reference: 940

LED lighting mirror (glass)

LED lighted mirror (glass) for repairing windshield impacts, this mirror allows you to visualise the impact throughout its repair, it has LED lighting. Size. 6.5cm x 4cm

Reference: FIX-2006

Brand: REPAR'VIT

Standard resin filler injector for REF -2000 bridge

Standard resin filling chamber for REF-2000 bridge Ø 0,9 cm

Reference: 996

Brand: REPARBRISE

1M hydraulic connection hose for 993 pump

Connection hose with quick-fit connector (female on 1 side only) suitable only for 993 vacuum pump and 994 injector. Length: 1M

Reference: 994JOINT

Brand: REPAREGLASS

Seal for 994CLAP plunger for 994 injector

Valve seal 994CLAP for injector 994 1. Effective solution for repairing leaks Quick repair of leaks: This 994CLAP valve seal is designed to solve leak problems on the upper end of the 994 injector. By replacing this small black seal, you can eliminate leaks and ensure optimal operation of your injector. Increased reliability: By replacing the worn...

Reference: 3202

Brand: REPARBRISE

Exchangeable nozzles for REPARBRISE 3200 injector (pack of 5)

Exchangeable nozzles for REPARBRISE 3200 injector (pack of 5). When you repair a windshield impact, it's important that the injector has uniform sealing when the resin is injected. It is now essential to change the nozzle of the 3200 injector as soon as it becomes damaged.

Reference: 512

Miniature 220V/12V cigarette lighter voltage transformers

Miniature 220V/12V cigarette-lighter voltage transformers, for recharging equipment with a cigarette-lighter connector. Ex. UV lamp, drill, etc.

Reference: 5BX-2016

Ø 0.9 cm Rubber seals for standard impact injector 5095 and FIX-2006

Ø 0.9 cm rubber seals for large impact injector 5095 and FIX-2006. It is important to change the seals regularly to ensure a good seal when injecting windshield repair resin. 1 bag of 5 pieces

Reference: 983

Brand: REPARBRISE

Seals (X2) for large impact adapter 946

Seals (X2) for large impact adapter 946. It is important to change the seals regularly to ensure a good seal when injecting the Windshield Repair Resin.

Reference: 993

Brand: REPARBRISE

Pressure vacuum pump for REPAR'VIT Senior 1320 kit

Vacuum pump delivered with hose ref.996 (quick connector on injector side and direct connection on pump) The pressure vacuum pump is used to assist the repair of the impact on your windshield, by creating an air vacuum. This helps to remove air and impurities from the impact before injecting the resin. Alternating pressure vacuum/pressure with your pump...

Reference: 969

Long probe for impact repair

Large probe, for perfect centring of the repair and easier resin injection.

Reference: 770

Window / windshield cleaner 20L - Mosquito repellent -770

Effectively remove traces of oil, insects and dust with the foam-based 770 glass/windscreen cleaner. Ideal for use in industry, the automotive sector and construction, this product ensures impeccable cleanliness of glass surfaces. Characteristics: Powerful action: Dissolves traces of oil, insects and dirt in an instant Multi-purpose: Suitable for...

Reference: RS-2030

Pack of 5 special resin injection syringes for windshield repairs

Resin dispenser pack consisting of 5 syringes and 3 needles. The RS-2030 syringe lets you remove the injection resin from the bottle or pipette and inject it into the injector. You can also use the syringe to fill drill holes and cracks in your windscreen.

Reference: 768

Foam window / windshield cleaner 768 - Mosquito repellent

Effectively remove traces of oil, insects and dust with the foam-based 768 glass/windscreen cleaner. Ideal for use in industry, the automotive sector and construction, this product ensures impeccable cleanliness of glass surfaces. Characteristics: Powerful action: Dissolves traces of oil, insects and dirt in an instant Multi-purpose: Suitable for...

Reference: 959

Brand: REPARBRISE

Carbide-tip pen for windschield impact

Carbide-tipped pen, used to remove surface impurities on the impact before repairing it.