Braided wire21 ml REPAREGLASSBraided wire The braided wire is made of three stainless steel resistant wires that are braided to one strand. The wire is anodized (with a traditional gold colour). It has a 0.80mm diameter.
Squared cutting wire
REPAREGLASS
Surprising, but true!
The cutting force of square wire is far superior to that of common round wire.
Try it out for yourself, you'll be amazed!
REF-VKD-22
Square wire. 0.6 x 0.6 mm, length: 22 m, wound on plastic spool.
691 NEWTON
Braided wire in a spool
REPAREGLASS
ø 0.80 mm, length: 22 m,
Wound on a plastic spool.
1083 NEWTON
The wire to be cut is twisted according to our exact specifications from three strong stainless steel wires. The wire is anodised in a typical "gold" colour.
L: 100M
2500 NEWTON
Nylon wire- Diam 1.1mm
ESPECIALLY DESIGN FOR THICK AND HEAVY PU
Ideal for :
-Old urethane
-Thick and heavy PU
-Trims which must not brake ( clips – fastener – spacers)
-Brakes at an high tensile strength
-Reusable length ( from about 2 to 4 applications)
-Do not scratch surfaces
-Could be use with most of the ratchet systems...
XKD-44 - SQUARE PIANO WIRE - 44M
976 NEWTON
Technical characteristics of our new REF-XKD-44 piano wire.
- This is a square piano wire with a larger cross-section0.7 x 0.7 mm than the VKD-44 (0.6 x 0.6 mm).
- The breaking strength of this rope is 36% higher than that of VKD-44.
- Available in 44 ml rolls
The Raptor™ is a cord and wire auto glass removal device designed from the ground-up to dramatically improve the power of the vacuum cup with the integration of our AirForce™ Constant Vacuum Cups. This technology has been specifically developed to create a quick placement and constant vacuum to the glass so the Raptor™ stays in place and resists...
MINI ANCHOR CUP
(include in the VIPER1124 kit)REF-MAC1125Compact size allows you to keep the wire closer to the glass surface .Design makes it easy to attach the wire and strong suction cup holdsin the toughest of situations. Measure 53 mm diameter ( the anchortab adding an extra 12,7 mm to that) and 38 mm high when the suctioncup si engaged.
Hook and pick setThis set of mini hooks is very helpful to remove joints and coverings while avoiding any possible damage.This practical set contains hooks in different shapes and a pick. The length of these tools is only 13mm! - 127 x 25 x 25 mm - 280 g
Urethane nozzle tool, top notchTM tool This tool allows you to cut rapidly and easily a proper V-notch on a urethane nozzle. This is important for an effective work! Indeed, before applying bond, a proper notch has to be cut. To use this tool, take a knife and cut the end of the nozzle tip to give yourself a bead. Next insert the top NotchTM tool inside...
REF. FSC-350SCRAPER (without blade)To scrape the old urethane bead. This scraper is universal due to thefact it can accept different blades width ( 13 mm – 16 mm – 20 mm)and angular bladesIts locking system with roll allow a quick and easy blade replacement
REF. PS-215Smoother / remover tool for Silicone / Urethane beadsThis tool allows to ensure to make a straight bead of silicone or urethane, but not only,it can remove also the old beads. The use of this product is with only one hand.