VBSA awarded ECOVADIS label
Banner
Sold in packs of 10
Compatible brands :
|
For Citroen |
|
|
C5 aircross |
Windshield clips |
Reference: 5555
Improve the acoustic comfort and durability of your vehicles with this versatile soundproofing plate. Key features: Self-adhesive: Fast, easy and time-saving application. Soundproofing and anti-vibration protection: Ideal for floors, doors, trunks, hoods and other sensitive vehicle areas. Exceptional malleability: Conforms perfectly to the shape of the...
Reference: DSB-2002
Effectively protect and soundproof car doors with this polyethylene foam film specially designed for professionals. Key features: Optimum protection: Acts as a barrier against vibration, moisture and impact, extending door life. Effective soundproofing: Reduces external noise for improved acoustic comfort inside the vehicle. Self-adhesive: Easy to apply...
Reference: CGE-148
Clip removal tool This tool is used to remove plastic clips on door linings. It fits easily down into the recessed area and then can slid under the head of the cowling clip. You then pull up on the center locking part and the clip can be removed. - 235 x 35 x 30 mm - 165 g
Reference: CCR-819
EQUALIZER® cowling clip removal tool If expension-type cowling worked the way they were designed, you would simply unscrew the plastic screw and the clip would come out. Unfortunately, they seldom work correctly. Our cowling clip removal tool has a small sharp screw that screws into the plastic head and pulls the screw out. The clip will then collapse and...
Reference: 501FC-310
FOR VOUR SAFETY Our windshield bondings have been tested and validated by TUV (crash tes!) + OEM (used by manufac!urers as original equipment). Standard FMVSS208/212. Products on the market for over 20 years. FAST-drying, one-component polyurethane bonding agent that reacts with humidity in the air to form a strong and elastic seal. The adhesive is...
Reference: CS-696
EQUALIZER® ClipSaver door upholstery remover The front of the tool is tapered so it will fit easily under a clip. Spread the jaws slightly so they will go under and around the clip. Then, close the jaws and it removes the clip without damaging it. Great for the removal of door panels. - 230 x 76 x 51 mm - 205 g
Reference: PH-1355
Curved Door Upholstery Remover For removing plastic fasteners in confined places. It is the same upholstery remover as the one shown above, but it is instended for use on the front part of the door where the door jam will often interfere with the removal of the door panel. Place the notch in the tool over the fastener and pry the fastener out the hole. It...
Reference: AP-6205
Tool declipsor SPRINGERTOOL The distinct precision curvature of the Springer Clip Removal Tool provides a varaible load distribution, safely moving the load point along the tool as more leverage is applied The tapered tip allows entry under closely fitted parts and the rounded edges avoid damage to the trim or vehicle. No matter a body shop you will be...
Reference: Q-BOND-PRO
Adhesive, filling and reiforcing powders for repairingQ-BOND professionnal kit Q-BOND is one of the finest products for repairing various types of breaks, cracks and other damages to wide range of items. It has received various awards for outstanding quality and superior performance. For more serious repairs there is the two-part system with unique...
Reference: GBM-27
The essential tool for precise, safe disassembly of bodywork and interior components. This set of 27 spatula levers is specially designed to meet the needs of bodybuilders and garages. It makes it easy to dismantle mirror faces, interior trim and other delicate components, without requiring the use of other protection. Advantages: Safe work: Allows work...
Reference: G-KNYL
Discover protective gloves that combine comfort and precision, perfect for detailed work. Made of flexible nylon, they offer excellent dexterity while guaranteeing a secure grip thanks to their polyurethane coating. Characteristics: Flexible and snug: Fit the hand perfectly for optimal comfort Polyurethane coating: Ensures better grip and increased...
Reference: CTD-607
Recessed Cowling Clip RemoverSome self-locking cowling clips are recessed down into the cowling. They are not the type that look like a Phillips or TORX®screw, but are the type that can be removed with a tool like the CGE-148. The only problem is the TPE657 will not reach downinto the recessed area and go under the head of the clip. If you manage to force...
Reference: 5510-1-1-004
Optimize the ergonomics of your POWERPUSH battery-powered glue gun with this sturdy and durable rack and pinion handle. Designed to offer maximum comfort of use, it guarantees easy and safe handling when gluing and sealing. Ideal for replacing a worn or damaged handle, it helps maintain the optimal performance of your POWERPUSH glue gun.
Reference: AIG-789
Many technicians remove windshields by starting the wire through the top and bottom center of the windshield, then cutting towards each side. So as to push the cutting wire into the urethane, especially where there is a wide surface of urethane, we recommend using the wire threader. The slot (1,2 mm only) and the cutting wire are pushed together into the...
Reference: WP738-E
Used to remove urethane and butyl from the pinchweld. The tool has a hardened steel blade of 24 mm wide that can be sharpened dozens of times. - 200 x 29 x 29 mm - 120 g
Reference: PWR-5064AC
This MILWAUKEE cigarette lighter charger is the ideal solution for mobile professionals, particularly in the windshield repair and bonding or car cleaning sectors. Compact and practical, it allows you to recharge your batteries directly from your vehicle's cigarette lighter socket, for total autonomy even when on the move. Compatible with: 12 V...
Reference: VB19105
Sold in packs of 10 Door panel staples - No. 20 Type: Composite panel stopper Color: White
Reference: VP-205-N353
Suction cup in very good condition - Please note: sold individually Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months SOLD INDIVIDUALLY – DELIVERED IN A CARRYING CASE This piston suction cup, with a 205 mm diameter, is specifically designed for heavy-duty lifting and handling. Its piston...
Reference: MTS-068
Hook and pick setThis set of mini hooks is very helpful to remove joints and coverings while avoiding any possible damage.This practical set contains hooks in different shapes and a pick. The length of these tools is only 13mm! - 127 x 25 x 25 mm - 280 g
Reference: KPM-5052-2
Version : MAN TGA 2024 Quantité : 5 pièces
Reference: FB082-DESTOCK
Only 1 blade in stock FEIN curved blade - Z curve, with fixed depth stop Total length: 80mm - Length of cutting edge: 14mm
Reference: PRP21-OCCASION
OCCASION AUTOMATIC PISTON - Used for our customer demonstrations. Only one piston available Replaces the manual plunger, automatically sucks in the suction cup when the button is pressed, can be used manually if the battery is flat. 5-hour autonomy Supplied with USB-C charging cable Fits ULTRAPOSE1, ULTRAPOSE3, VP-230 and VP-230SPECIALE
Reference: G-C0
Ensure your safety when working with live equipment thanks to our insulating gloves in natural latex, specially designed to offer optimum protection against electrical risks. Compliant with the strictest standards, these gloves guarantee reliable insulation and increased resistance to extreme conditions. Compliance and Standards: EN 60903: 2003 -...
Reference: JPU7
Soft universal mouldings Strong adhesion. Very flexible ruber. Easy removal of theliner. REF-JPU7• 7 mm x 22,8 m PLEASE ASK OUR KEYCHAIN SAMPLE WHICH WILL ALLOWS TO DISCOVEROUR UNIVERSAL MOULDING RANGE.Supplied with a detail list with many exemple of cars that cover.)
Reference: FSC1.7L
Discover the FEIN electric knife, a must-have tool in the automotive glazing industry. Designed for professionals, this knife combines power, optimized ergonomics, and cutting precision, all with exceptional maneuverability thanks to its low weight. Included in the kit: FEIN electric knife 12 cutting blades: 2 x REF-FB212 3 x REF-FB207 2 x REF-FB208 1 x...
Reference: L110
Simplify storage and use of your protective rolls with this reel on wheels. Key features: Versatile: This dispenser is designed to support a variety of rolls, such as electrostatic film, marouflage paper and other consumables, with rolls up to 1175 mm long. Adjustable, sliding “T” rod: Allows the roll to be locked at the desired height, offering...
Reference: DSS-175
One-man wire cut-out toolREPAREGLASSOne-man wire cut-out toolThis tool acts like another person sitting inside the vehicle pulling the wire back after you havemade your cutting stroke.Attached to the swivel is a spring that acts as a second person; you pull the wire out to make your cut and the springs pulls the wire back in. The spring is attached to a...
Reference: VB10011
Sold in bags of 10 Plastic nuts for sheet metal screws - N°9
Reference: FB083-DESTOCK
REF-FB-083 Hook blade with U shapeCutting length: 10 mmSold individually
Reference: 3007-K
The adjustable REPAREGLASS cold knife is designed to offer efficiency, speed, and precision when cutting. Thanks to its adjustment lever, you can extend or retract the blade in one simple movement, easily adjusting the cutting depth without having to unscrew the retaining nut. No more wasted time: this innovative system saves you considerable time while...
Reference: 8PZ010611-981
kit radar 1 (VW - BMW) pour CSC TOOL et CSC TOOL MOBILE
Reference: RACCORD1-4FEMELLE
This connector is designed to provide a quick, reliable, and leak-proof connection between your guns and your compressed air source. Made from robust and durable materials, it guarantees safe and optimal use in workshop conditions.
Sold in packs of 10
