VBSA awarded ECOVADIS label
Banner
Sold in packs of 10
Type: Trim clips
Color: Metal
compatible brands :
|
For Renault |
|
|
Trafic, Clio 3 |
Metal trim clip |
Reference: 5555
Improve the acoustic comfort and durability of your vehicles with this versatile soundproofing plate. Key features: Self-adhesive: Fast, easy and time-saving application. Soundproofing and anti-vibration protection: Ideal for floors, doors, trunks, hoods and other sensitive vehicle areas. Exceptional malleability: Conforms perfectly to the shape of the...
Reference: DSB-2002
Effectively protect and soundproof car doors with this polyethylene foam film specially designed for professionals. Key features: Optimum protection: Acts as a barrier against vibration, moisture and impact, extending door life. Effective soundproofing: Reduces external noise for improved acoustic comfort inside the vehicle. Self-adhesive: Easy to apply...
Reference: CGE-148
Clip removal tool This tool is used to remove plastic clips on door linings. It fits easily down into the recessed area and then can slid under the head of the cowling clip. You then pull up on the center locking part and the clip can be removed. - 235 x 35 x 30 mm - 165 g
Reference: CCR-819
EQUALIZER® cowling clip removal tool If expension-type cowling worked the way they were designed, you would simply unscrew the plastic screw and the clip would come out. Unfortunately, they seldom work correctly. Our cowling clip removal tool has a small sharp screw that screws into the plastic head and pulls the screw out. The clip will then collapse and...
Reference: 501FC-310
FOR VOUR SAFETY Our windshield bondings have been tested and validated by TUV (crash tes!) + OEM (used by manufac!urers as original equipment). Standard FMVSS208/212. Products on the market for over 20 years. FAST-drying, one-component polyurethane bonding agent that reacts with humidity in the air to form a strong and elastic seal. The adhesive is...
Reference: CS-696
EQUALIZER® ClipSaver door upholstery remover The front of the tool is tapered so it will fit easily under a clip. Spread the jaws slightly so they will go under and around the clip. Then, close the jaws and it removes the clip without damaging it. Great for the removal of door panels. - 230 x 76 x 51 mm - 205 g
Reference: PH-1355
Curved Door Upholstery Remover For removing plastic fasteners in confined places. It is the same upholstery remover as the one shown above, but it is instended for use on the front part of the door where the door jam will often interfere with the removal of the door panel. Place the notch in the tool over the fastener and pry the fastener out the hole. It...
Reference: AP-6205
Tool declipsor SPRINGERTOOL The distinct precision curvature of the Springer Clip Removal Tool provides a varaible load distribution, safely moving the load point along the tool as more leverage is applied The tapered tip allows entry under closely fitted parts and the rounded edges avoid damage to the trim or vehicle. No matter a body shop you will be...
Reference: Q-BOND-PRO
Adhesive, filling and reiforcing powders for repairingQ-BOND professionnal kit Q-BOND is one of the finest products for repairing various types of breaks, cracks and other damages to wide range of items. It has received various awards for outstanding quality and superior performance. For more serious repairs there is the two-part system with unique...
Reference: GBM-27
The essential tool for precise, safe disassembly of bodywork and interior components. This set of 27 spatula levers is specially designed to meet the needs of bodybuilders and garages. It makes it easy to dismantle mirror faces, interior trim and other delicate components, without requiring the use of other protection. Advantages: Safe work: Allows work...
Reference: G-KNYL
Discover protective gloves that combine comfort and precision, perfect for detailed work. Made of flexible nylon, they offer excellent dexterity while guaranteeing a secure grip thanks to their polyurethane coating. Characteristics: Flexible and snug: Fit the hand perfectly for optimal comfort Polyurethane coating: Ensures better grip and increased...
Reference: CTD-607
Recessed Cowling Clip RemoverSome self-locking cowling clips are recessed down into the cowling. They are not the type that look like a Phillips or TORX®screw, but are the type that can be removed with a tool like the CGE-148. The only problem is the TPE657 will not reach downinto the recessed area and go under the head of the clip. If you manage to force...
Reference: KIT-AGRAFES-ECO24
SET OF WINDSHIELD CLIPS AND STAPLES Contains the 32 most frequently used references Box size: L: 46.5cm x W: 38cm x H: 7cm See all clips in the page description
Reference: DESTOCK-VB54
Specially designed for the V54 gun, this 14.4V lithium-ion battery offers optimal autonomy and power for all your windshield bonding applications. With a capacity of 3.0 Ah, it guarantees continuous, high-performance work, even during intensive use. Features: High-performance 3.0 Ah Li-Ion battery Voltage: 14.4V Compatible exclusively with the V54 gun...
Reference: CAISSE-N397
In very good condition Only a few minor cosmetic flaws - 1 Only one item available 2nd LIFE warranty: 6 months Storage case Length: 44cm - Width: 17cm - Height: 19cm
Reference: VP-230-N319
In good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Heavy-Duty Piston Suction Cup Ø 230 mm – Lifting Capacity up to 380 kg Looking for a reliable suction cup for heavy glass handling? Our Ø 230 mm piston suction cup is engineered for professionals who demand maximum lifting power,...
Reference: Z30
This blade series enables you to use a cold knife where you could never use it before ! The 60 mm long blade isintended to cut all those hard to reach PU bondings that are far away from the glasses edge and where a normalcold knife blade could never reach. But also all lowerglass edges with surmounting wings and bonnets are aperfect field of application...
Reference: TSAD-VIS
Brand: L'ULTRAPOSE
Please note that the TSAD-VIS should not be used at the same time as the TSAD-ADAPT
Reference: PASTILLE-ROUGE
Red plastic washer specially designed to adapt Milwaukee 12V gun for use with 400 ml and 600 ml cartridges. It ensures perfect compatibility and optimal hold of the cartridge in the gun, guaranteeing smooth and controlled extrusion of the product.
Reference: 5026-400-14V-EU-N245
In good condition Only a few cosmetic defects shown in the photos – Only 1 unit available Second Life Warranty: 6 months Powerpush 14V Battery Gun The PowerPush gun is designed to deliver unmatched power and optimal efficiency, ensuring smooth and effortless application of PU in any situation. Powerclutch Transmission: Improves extrusion recovery speed...
Reference: PILE-RAPTOR522
Battery pack for RAPTOR kit Warning: these batteries are compatible with RAPTOR kits from serial number R0005372 upwards. For kits purchased before this number, you will need to order the reference PILE-RAPTORX4.
Reference: VP-230-N322
In very good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Heavy-Duty Piston Suction Cup Ø 230 mm – Lifting Capacity up to 380 kg Looking for a reliable suction cup for heavy glass handling? Our Ø 230 mm piston suction cup is engineered for professionals who demand maximum lifting...
Reference: VP-230-N323
Average condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Heavy-Duty Piston Suction Cup Ø 230 mm – Lifting Capacity up to 380 kg Looking for a reliable suction cup for heavy glass handling? Our Ø 230 mm piston suction cup is engineered for professionals who demand maximum lifting power,...
Reference: CANMAX-DELUXE22
The robust, practical and mobile storage solution for all your tools The Deluxe22 tool trolley is designed for demanding professionals looking for a mobile, modular and durable storage system. With a capacity of 82 liters, it allows you to easily transport and organize your tools and accessories, even the most bulky ones. Main features: Telescopic...
Reference: CGE-148
Clip removal tool This tool is used to remove plastic clips on door linings. It fits easily down into the recessed area and then can slid under the head of the cowling clip. You then pull up on the center locking part and the clip can be removed. - 235 x 35 x 30 mm - 165 g
Reference: TB-415
Locking strip tool With the 5 different eyelets and the pressure roller, this locking strip tool can install pratically all different types of locking strips.- 160 x Ø 25 mm - 215 g
Reference: DLH-511
Double-end moulding release tool This heavy-duty tool is made of steel so it will not bend. It has a small rubber spacer through each end to the tool up off the glass about 1 mm. This is important for two reasons. First, it prevents the tool from scratching the glass. Secondly, it holds the end above the glass so there is less chance the tip will catch...
Reference: CCR-819
EQUALIZER® cowling clip removal tool If expension-type cowling worked the way they were designed, you would simply unscrew the plastic screw and the clip would come out. Unfortunately, they seldom work correctly. Our cowling clip removal tool has a small sharp screw that screws into the plastic head and pulls the screw out. The clip will then collapse and...
Reference: VB56305
Sold in packs of 10 Type: Panel stopper Color: White Material: Acetal - POM
Reference: PWR-5064
Designed for demanding professionals, this MILWAUKEE charger allows you to quickly and efficiently recharge your 12 V batteries. Thanks to its sequential charging technology, each cell is recharged individually for optimized charging time and extended battery life. Compatible with the following MILWAUKEE batteries: PWR-5012 (12V – 2.0 Ah) PWR-5013 (12V...
Reference: VP-230SPECIALE-N338
In good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Ø 230 mm Piston Suction Cup – For Heavy Loads and Curved Glass Surfaces Designed for handling very heavy loads up to 350 kg, this professional Ø 230 mm suction cup is ideal for working with highly curved glass, such as bus...
Reference: ECHAFAUDAGE-2M50
MOBILE SCAFFOLDINGIN ALUMINUM - LESS LONGSize of the platform of 2.50MAttention: Overall width: 2.67M with Ergots
Reference: GEZ-543-1-N343
Suction cup in good condition - Please note: sold individually Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months This piston suction cup is specially designed for installing and removing automotive glass. Its ergonomic handle ensures a secure and comfortable grip, even when handling large glass...
Reference: ULTRAPOSE1-DELUXE
Brand: L'ULTRAPOSE
The UltraPose1 tool - New Version with PE24 Automatic Vacuum Pistons VBSA pushes the boundaries of performance and simplicity even further with the UltraPose1 Deluxe, an advanced version of the windshield installation tool equipped with two PE24 automatic vacuum pistons. Designed for demanding professionals, this tool allows the installation and removal...
Reference: CTD-607
Recessed Cowling Clip RemoverSome self-locking cowling clips are recessed down into the cowling. They are not the type that look like a Phillips or TORX®screw, but are the type that can be removed with a tool like the CGE-148. The only problem is the TPE657 will not reach downinto the recessed area and go under the head of the clip. If you manage to force...
Sold in packs of 10
Type: Trim clips
Color: Metal
