VBSA awarded ECOVADIS label
Banner
Adjustable windshield trestle with rubber plates with tool storage bag
115 cm x 182 cm x 88 cm
Load capacity: 180 kg
Rubber foot |
Rubber foot
€0.00 |
|
Adjustable windshield trestle with rubber plates |
Adjustable windshield trestle with rubber plates
€0.00 |
|
Adjustable windshield trestle |
Adjustable windshield trestle
€0.00 |
Adjustable windshield trestle with rubber plates with tool storage bag
115 cm x 182 cm x 88 cm
Load capacity: 180 kg
Reference: HDS-480NEW
Adjustable windshield trestleREPAREGLASS- width multi-adjustable for different lengths and weights so as carry all sizes of windshields.- Very sturdy version, load capacity up to 250Kg.- Made of electroplated steel, diameter: 30 mm.- Resistant foam at the base of the trestle.- 105 cm x 95 cm x 110 cm6.700 kg
Reference: 501FC-310
FOR VOUR SAFETY Our windshield bondings have been tested and validated by TUV (crash tes!) + OEM (used by manufac!urers as original equipment). Standard FMVSS208/212. Products on the market for over 20 years. FAST-drying, one-component polyurethane bonding agent that reacts with humidity in the air to form a strong and elastic seal. The adhesive is...
Reference: 520-30
Solvent-based cleaner with adhesion-activating properties for pre-treating direct bonded pro windshields, Single-application wipe-off. Various packaging options: 30ml bottle - Ref.520-30 - Sold individually or in boxes of 25 250 ml bottle - Ref.520-250 - Sold individually or in boxes of 12 1L bottle - Ref.520-1 - Sold individually or in boxes of 12...
Reference: 530-30
Our glass/metal primer is a black, the curing of which is both physical and chemical.content solvent to prepare the windshield and the pinchweld befor the bonding. Primer 530 promotes polyurethane adhesion and protects against UV rays. It also has preventive anti-corrosion properties. If there are traces of rust on the bodywork, it is imperative to use...
Reference: V54
Designed for extruding standard 310 ml cartridges and 400 ml cartridges, it ensures smooth, controlled and effortless application. Main features: Compatible with 310 ml cartridges and 400 ml cartridges Supplied complete: 3.0 Ah Li-ion battery, fast charger (1 hour), carrying case Weight with battery: 2.75 kg Speed variator: precise adjustment on the...
Reference: BOB-CHAM
Wadding cleaning paper PEFC certification, PEFC Label. Suitable for food contact Controlled consumption thanks to sheet-by-sheet distribution. Sheet dimensions: 340 x 257 mm - perforated. Roll length: 350 m Diameter of the roll: 30 cm Grammage: 2 x 19g/m². Pack of two rolls of 1000 sheets = 2000 sheets Sold in sets of 2...
Reference: ULTRAPOSE-EVOLUTION
Brand: L'ULTRAPOSE
This product has received significant recognition, having won the Bodywork of the Year 2017 award, which is a testament to its quality and innovation in the field. This system has several features and advantages that make it particularly attractive to professionals in the automotive bodywork and glazing industry: Motorised system for removing and...
Reference: RAPTOR
The Raptor™ is a cord and wire auto glass removal device designed from the ground-up to dramatically improve the power of the vacuum cup with the integration of our AirForce™ Constant Vacuum Cups. This technology has been specifically developed to create a quick placement and constant vacuum to the glass so the Raptor™ stays in place and resists...
Reference: BOB-FIBRE
Ecological wiping spool 100% recycled product Milk carton ECOLOGICAL WIPING SPOOL MADE OF CELLULOSE FIBRES PACK OF 2 ROLLS OF 1000 SHEETS Advantages: No discoloration No delamination or linting More absorbent than chamois rolls Raw material: cellulose fibre Sheet size: 220x300mm Roll length: 300m Diameter: 28cm Grammage: 18.5 ±1g Sold in sets...
Reference: DEC-50
This decontamination process is imperative if the windshield bonding is to last. The thermoformed packaging produces a chemical reaction on your windscreen, making it difficult to bond without a decontamination step before bonding. Thermoforming is carried out under a source of heat, which causes an excess of silicone on the surface, preventing the...
Reference: AP-100
Felt Applicators must be used to apply the primer or activating cleaner correctly to the Windshield or Bodyshop. Box of 100. Length 105 mm
Reference: BLACKNIT
Give your hands optimum protection with our powder-free black nitrile gloves, designed for professional, all-purpose use. Recommendations for use : Store in a cool, dry place, away from excessive heat (maximum temperature: 40°C). Open tin to be protected from UV rays and direct exposure to sunlight. Packaging: Sold in boxes of 100 pieces, ideal for...
Reference: PWR-5076
Plastic washer for holding nozzles, compatible with MILWAUKEE extruder guns. Ensures reliable, stable nozzle attachment during extrusion, preventing loosening during application.
Reference: ZK35
The ZIPKNIFE cold knife is specially designed to provide optimal control when cutting windshields. Its unique shape keeps the cutting head firmly in place while ensuring great freedom of movement. Thanks to its ergonomic design, it allows effective force to be applied in both directions, making cutting easier even in hard-to-reach areas. This knife is...
Reference: ZDK-395
The REPAREGLASS neoprene-coated cold knife is an essential tool for windshield installation professionals. Designed for cold cutting, it features a neoprene coating that provides a safer grip while protecting the painted surfaces of the vehicle. Used worldwide for over 30 years, this knife has evolved to meet today's requirements: modern paints are more...
Reference: NSE-825
Telescopic Windshield Rack, 5 compartments. L: 800 mm x W: 540 mm x H: 635 mm Maximum height: 970 mm Weight: 22 kg Load capacity: 200 kg These windshield racks allow you to transport your windows safely, saving you the hassle of loading bulky cardboard boxes in the future. The racks are foldable, so take up very little space when empty. Adjustable to 3...
Reference: UCM1529-1600
Our seals for plastic windows have been designed to solve the problems associated with the difficulty of maintaining a good seal on plastic windows after the windshield has been replaced, or even when it has to be replaced when it is damaged, torn or broken. This specific roll of seal has been designed for simple, effective installation thanks to its...
Reference: 5026-400-20V-EU-N264
In good condition Only a few cosmetic defects shown in the photos – Only 1 unit available Second Life Warranty: 6 months Powerpush 20V Battery Gun The PowerPush gun is designed to deliver unmatched power and optimal efficiency, ensuring smooth and effortless application of PU in any situation. Powerclutch Transmission: Improves extrusion recovery speed...
Reference: CS-696
EQUALIZER® ClipSaver door upholstery remover The front of the tool is tapered so it will fit easily under a clip. Spread the jaws slightly so they will go under and around the clip. Then, close the jaws and it removes the clip without damaging it. Great for the removal of door panels. - 230 x 76 x 51 mm - 205 g
Reference: CREMAILLERE-MILWAUKEE
Replacement rack compatible with Milwaukee 18V battery-powered guns. Available in 310-400 ml and 600 ml versions, they allow the use of cartridges or pods according to your needs.
Reference: TS-RALLONGE
Brand: L'ULTRAPOSE
For easier removal of the TS-RALLONGE, we recommend our TS-ADAPT, which has a quick-release pin.
Reference: THH-540
Telescopic bonnet holder Keeps the bonnet or hatch open at any desired angle. Telescopic bonnet holder tepless adjustable from 54 to 120 cm.
Reference: VP-230SPECIALE-N338
In good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Ø 230 mm Piston Suction Cup – For Heavy Loads and Curved Glass Surfaces Designed for handling very heavy loads up to 350 kg, this professional Ø 230 mm suction cup is ideal for working with highly curved glass, such as bus...
Reference: VP-230SPECIALE-N333
In very good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Ø 230 mm Piston Suction Cup – For Heavy Loads and Curved Glass Surfaces Designed for handling very heavy loads up to 350 kg, this professional Ø 230 mm suction cup is ideal for working with highly curved glass, such as bus...
Reference: SERV-OPB-T2
Also note that this drawer is in selection for the "Servante à la carte" (custom design) formula
Reference: RL-170
Suction cup with handle diameter 70 mmDurable quality suction cup. Adaptable on glass, marble, ceramic.Ideal to remove and install quarter glass.Loading capacity : 12 kgREF. RL-170Sold individually
Reference: WK3
Lame BTB multi-fonction plate 200mm(utilisation générale)
Reference: PACK20-REGCAP-MAXI
BUY + AND SAVE + Thanks to its reclosable format, the gel can be kept for future repairs, guaranteeing optimal use. Designed to ensure at least 60 repairs, this kit is ideal for professionals and workshops. Pack contents: - 20 x 12 ml REG-CAPLUIE-MAXI gels - 4 pushers for easy and precise application - 60 nozzles to guarantee a controlled flow without...
Reference: VKD-22A
Brand: REPAREGLASS
Squared cutting wire REPAREGLASS Surprising, but true! The cutting force of square wire is far superior to that of common round wire. Try it out for yourself, you'll be amazed! REF-VKD-22 Square wire. 0.6 x 0.6 mm, length: 22 m, wound on plastic spool. 691 NEWTON
Reference: VP-230-N321
In very good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Heavy-Duty Piston Suction Cup Ø 230 mm – Lifting Capacity up to 380 kg Looking for a reliable suction cup for heavy glass handling? Our Ø 230 mm piston suction cup is engineered for professionals who demand maximum lifting...
Reference: PSD6
The 6 mm diameter windshield cleaning blades are designed to effectively remove excess adhesive from the windshield seal, particularly in curved areas and hard-to-reach edges. Their specific shape allows for precise cleaning while reducing the risk of damage to the paintwork, unlike standard scraping blades. Also available in 12 mm rectangular (REF-PS-12)...
Reference: RTD-499
Pair of ratcheting tie downsRatcheting tie downs are used by glaziers to secure freshly bonded-in glasses.Use these ratcheting tie downs together with our suction cups so as to hold vertical-glazed glasses in place while the urethane cures. The ratcheting tie downs are simply passed through the handles of the vacuum cups and tight-ened.- 165 x 165 x 10 mm...
Reference: AIG-730
T-handles wire threader for cutting steel or nylon thread
Reference: REG-CAPLUIE-MAXI
BUY + AND SAVE + 12ML rain sensor repair gel, 3 times more gel than standard packaging on the market! For some makes of vehicle, such as VW and Mercedes, the rain sensor cannot be reused when the windscreen is changed and must therefore be replaced. The two-component silicone gel makes it possible to reuse round and angular rain and light sensors...
Adjustable windshield trestle with rubber plates with tool storage bag
115 cm x 182 cm x 88 cm
Load capacity: 180 kg
