
Reference: 51855
U shape 19 mm Equalizer cutting blade
REF. 51855U shape 19 mm Equalizer cutting blade
REF. 51857
U shape 38 mm Equalizer cutting blade
![]()
![]() REF. 51855 |
U shape 19 mm Equalizer cutting blade
€0.00 |
|
![]()
![]() REF. 51854 |
50 mm Equalizer straight offset cutting blade
€0.00 |
REF-51857
Lame Equalizer U38 mm
Les lames existent aussi:
REF-51855
Lame Equalizer U19 mm
REF-51854
Lame Equalizer courbe 50 mm
Reference: 51855
REF. 51855U shape 19 mm Equalizer cutting blade
Reference: 51857
REF. 51857U shape 38 mm Equalizer cutting blade
Reference: 51854
REF. 5185450 mm Equalizer straight offset cutting blade
Reference: Z10RD
REF-Z10RDNew ULTRAWIZ Cold knife bladeSold individually - Extra thin Cutting length: 19 mmCARTON OF 10
Reference: Z60
This blade series enables you to use a cold knife where you could never use it before ! The 60 mm long blade is intended to cut all those hard to reach PU bondings thatare far away from the glasses edge and where a normalcold knife blade could never reach. But also all lowerglass edges with surmounting wings and bonnets are aperfect field of application...
Reference: RAPTOR
The Raptor™ is a cord and wire auto glass removal device designed from the ground-up to dramatically improve the power of the vacuum cup with the integration of our AirForce™ Constant Vacuum Cups. This technology has been specifically developed to create a quick placement and constant vacuum to the glass so the Raptor™ stays in place and resists...
Reference: AP-6205
Tool declipsor SPRINGERTOOL The distinct precision curvature of the Springer Clip Removal Tool provides a varaible load distribution, safely moving the load point along the tool as more leverage is applied The tapered tip allows entry under closely fitted parts and the rounded edges avoid damage to the trim or vehicle. No matter a body shop you will be...
Reference: 3007-K
Fully-adjustable cold knife. The only one available on the market today. Pull on the lever to release the blade, push down on the lever to block the blade (at any height). To exchange the blade, you do not need to unscrw the screw nut anymore, so you do not waste time anymore. With this new very handy knife, you really save time.
Reference: ENO841
Cutting blade. Length: 25mm - 60 x 30 x 25 mm 45 gBE CAREFUL: Ninja blades have been elaborated to fit on the Ninja knife. They should not be used with other knives.
Reference: H1
Olfa® knifeKnife with a snap-off blade, 25 mm and 0,7 mm wide.The blade can be outside its housing up to a length of 10 cm and a thumb locking screw allows you to lock the blade in any position.Back of the knife features a rubber grip that lets the knife rest comfortably in your hand and keeps it from slipping.- 172 x 34 x 25 mm - 155 g
Reference: TRI-176
REF. TRI-176Triangular wire.0,85 x 0,85 mm,Length : 50 metersTensile strength : 691 Newton
Reference: ZK45
The compact ZIPKNIFE cold knife is designed for cutting in hard-to-reach areas. Uses all standard cold knife blades Without blade.
Reference: BAT-FSC1.7
This 18 V - 2.4 Ah Li-ion battery is specially designed to power FEIN battery-powered knives of previous generations. Offering reliable and consistent performance, it is ideal for extending the life of your compatible FEIN tools. Key features: Li-ion technology: Ensures stable autonomy and fast recharging. 2.4 Ah capacity: Optimized for work requiring...
Reference: TB-102
Rope insert tool.For the replacement of non-bonded windshields with rubber mouldings.The toll is delivered with a very resistant rope, the length of which (6 m) is enough. Can be used with private cars and trucks.
Reference: LBB-10
Rigid blades "BLACK" segmented pack of 10 pieces for L2 and XL2
Reference: ENL842
Cutting blade. Length: 38mm- 55 x 30 x 38 mm 50 gBE CAREFUL: Ninja blades have been elaborated to fit on the Ninja knife.They should not be usedwith other knives.
Reference: FSC1.7L
Fein electric knife + 9 blade: - with tool box and accessories- more lightweight- more refined- easy and rapid replacement of the wrench- speed adjuster-knife -BLADE REF-FB212 x2-BLADE REF-FB207 x3-BLADE REF-FB208 x1-BLADE REF-FB209 x1-BLADE REF-FB157 x1-BLADE REF-FB111 x1
Reference: DESTOCK-UW-4018
Knife with 1 blade - steel with plastic handle, for use with TKS-100 blades
Reference: FB110
REF-FB-110 Lame à crochet en U Profondeur de coupe 40 mmvendue à l’unité
Reference: BOB-1.5-ROLL-OUT
Round wire in a spool The round profile and the small diameter make this wire a real problem solver for todays cars with narrow gaps between glass and body. It has the same high tensile strength than the VKD-44but offers at the same time as much lower risk to damage interior linings and dashboards.679 Newtonø 0,80 mm, 1500 ml
Reference: MTS-068
Hook and pick setThis set of mini hooks is very helpful to remove joints and coverings while avoiding any possible damage.This practical set contains hooks in different shapes and a pick. The length of these tools is only 13mm! - 127 x 25 x 25 mm - 280 g
Reference: DST-734BUS
Special wire threader for bus and trucks with 2 holes ( for square or braided wire and nylon wire.) The end of the needle has a special designed in order to introduce easy the wire through the urethane. Push it in the urethane, insert the wire inside the tube, remove the wire threader and lead the wire throughout the urethane, in order to be able to pic...
Reference: LM-460
Long knife with 1 blade Some vehicles have extra-long dashes. So you have to cut the bond from the inside. As long as the band of urethane is not too thick, you can use knives designed to cut urethane. Two lengths are available: 46 cm (standard) and 61 cm (designed for vehicles with a high windshield slope and with ewtra-long dashes). Both are made of...
Reference: 113656
Set of 4 wheels for handble rolling tool-box (Ref. CS-RC14)
Reference: PILE-RAPTORX4
Rechargeable batteries for RAPTOR kit - Warning note that these batteries are compatible with our RAPTOR kits with a serial number prior to R0005372. If in doubt, please contact us. Sold in packs of 4 For information: 4 batteries are required for the RAPTOR device.
Reference: SGR-380
Glass scraper with 1 RK-100A bladeMainly used to rapidly and entirely remove bond residues on windows that will be reinstalled. Also used to remove stickers. Simply replace the old blade by a new one, no sharpening needed.
Reference: VKD-44A
Brand: REPAREGLASS
SQUARED CUTTING WIRE in a spool REPAREGLASS Surprising but true! The cutting resistance of the squared wire is far higher than the one of the common round wire. Try it, you will see!Squared wire - 0,6 x 0,6 mm,- length: 44m, on plastic spool.- 100 x 22 mm - 110 g
Reference: WK28RM
Right hand, inverted BTB blade, 25 mmManual or pneumatic use.
Reference: CT-749
Window and doorclip removal toolThis tool is used to remove clips that are used with Opel and Ford brands, as well as with most of other vehicles that have clips.- 250 x 58 x 32 mm- 130 g
REF. 51857
U shape 38 mm Equalizer cutting blade