Cold knife blade, extra fine 19 mm

Reference: XL2-N59

Olfa ® long knife with breakable blade - 2nd life

In very good condition Only a few minor cosmetic flaws - 1 Only one item available 2nd LIFE warranty: 6 months Breakaway blades have been growing in popularity in our industry for several years. It quickly became apparent that a knife equipped with this type of blade would be ideal for cutting the bottom adhesive strip when working on automotive glass....

Reference: FB097-DESTOCK

FEIN curved blade 125mm - Z-curve with fixed stop

FEIN curved blade - Z curve, with fixed depth stop Total length: 125 mm - Length of cutting edge: 58mm Unit

Reference: SGR-380-N120

Window scraper, with 1 blade RK -100A - 2nd life

In good condition - red in color Only a few minor cosmetic defects appear - 1 Only one item available 2nd LIFE guarantee: 6 months An essential tool for quickly and efficiently preparing glass surfaces, this scraper is mainly used to thoroughly remove adhesive residue before reinstalling glass. It can also be used as a scraper to remove labels or other...

Reference: CCR-819

EQUALIZER® cowling clip removal tool

EQUALIZER® cowling clip removal tool If expension-type cowling worked the way they were designed, you would simply unscrew the plastic screw and the clip would come out. Unfortunately, they seldom work correctly. Our cowling clip removal tool has a small sharp screw that screws into the plastic head and pulls the screw out. The clip will then collapse and...

Reference: SD-22-N139

Braided wire in a spool - - ø 0,80 mm - 22ML -Second LIFE - N139

Functional rope, only cosmetic defects - 1 item available 2nd LIFE guarantee: 6 months Braided wire in a spool REPAREGLASS ø 0.80 mm, length: 22 m, Wound on a plastic spool. 1083 NEWTON The wire to be cut is twisted according to our exact specifications from three strong stainless steel wires. The wire is anodised in a typical "gold" colour.

Reference: WK4

Non-rigid, bent BTB blade, 190mm

Non-rigid, bent BTB blade, 190mm

Reference: FB081

Cutting blade, cranked 60 mm

Lame à découper, courbe profondeur de coupe : 60 mm longueur totale : 85 mm vendue à l'unité

Reference: TB-102

Rope insert tool length of the rope: 9m (pour bus et poids lourds)

Rope insert tool.For the replacement of non-bonded windshields with rubber mouldings.The toll is delivered with a very resistant rope, the length of which (6 m) is enough. Can be used with private cars and trucks.

Reference: FB101

Hook blade with U shape - 60mm

REF-FB-101 Hook blade with U shapeCutting length: 60 mmSold individually

Reference: LAME-DECOUPE-NINJA

Cold cutting blade: Equalizer Ninja

Specially designed for the Equalizer® Ninja pneumatic knife, these cold cutting blades offer optimal precision and remarkable efficiency, suitable for use on all types of windshields. Their design absorbs vibrations while ensuring a clean and fast cut, even in the most difficult-to-reach areas.

Reference: Z5

Cold knife blade, extra fine 25 mm

Cold knife blade, extra fine - Sold individually - Cutting length: 25 mm - 18g CARTON OF 10

Reference: AEB405-N194

Pneumatic knife: Equalizer® EXCALIBUR® DELUXE - 2nd LIFE - N194

Kit in good condition. The case may be incomplete (blades). Only cosmetic defects shown in the photos are present. Only one item available. 2nd LIFE warranty: 6 months Recommended for cutting the lower parts of the windscreen, rear windows and quarter windows. Cutting the interior of the vehicle. Compact and lighter, it is even easier to handle,...

Reference: SK150

Replacement blade for fsl 240 pinchweld scraper l:19mm

Replacement blade for fsl 240 pinchweld scraper l:19mm

Reference: FB073

FEIN cutting blade, straight 35 mm

FEIN cutting blade, straight 35 mm (56 mm 12 g)

Reference: AEB405-N192

Pneumatic knife: Equalizer® EXCALIBUR® DELUXE - 2nd LIFE - N192

Kit in good condition. The case may be incomplete (blades). Only cosmetic defects shown in the photos are present. Only one item available. 2nd LIFE warranty: 6 months Recommended for cutting the lower parts of the windscreen, rear windows and quarter windows. Cutting the interior of the vehicle. Compact and lighter, it is even easier to handle,...

Reference: PAIG-200-N112

Pair of pull handles in corkscrew design - 2nd choice

In average condition - red color Only a few minor cosmetic defects appear - 1 Only one item available 2nd LIFE warranty: 6 months The ideal solution for quick and easy windshield cutting. This ingenious system allows for quick and secure fastening of the metal wire without tools. Simply insert the wire into the conical brass rod, pass it through the...

Reference: Z3

Cold knife blade 38 mm

Cold knife blade, extra fine- Sold individually- Cutting length: 38 mm- 20 gCARTON OF 10

Reference: FRE-080-P-N167

Retention device: metal strip and trim - 2nd life

In good condition Cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months To prevent the corners of hubcaps from sticking out, they are often attached with adhesive tape. However, this method carries risks: adhesives can react chemically with the vehicle's paintwork, causing damage. The ideal solution? Our...

Reference: WFA-525

Arm wiper puller for rearwindows.

Arm wiper puller for rearwindows.To avoid to damage the arm wipersfrom rear vehicules, which are oftendamage with traditional arm wiper pullersEx: Peugeot 307-207, Renaultclio III, Espace Laguna, Megane,Nissan Micra et primera

Reference: FB209

Hook blade with L shape - 38 mm

profondeur de coupe : 38 mmvendue à l'unité

Reference: MSP-211

BOX EXTRACTOR

Arm wiper pullers kit If you remove a bolted on windshield wiper a few months after the vehicle was builtthen it is usually not difficult to remove, but try removing the wiper arm two or threeyears after it was built. It can be almost impossible because manufacturers use onetype of metal on the wiper arm and a different type of metal on the wiper post. If...

Reference: 238-N165

Storage case L: 40 cm x H: 20 cm x W: 20 cm - 2nd LIFE - N165

In good condition Only a few minor cosmetic defects appear - 1 Only one item available 2nd LIFE guarantee: 6 months Storage case Length: 40 cm - Width: 20 cm - External height: 20 cm - Internal depth: 15 cm.

Reference: XL2-N91

Olfa ® long knife with breakable blade - 2nd life

In very good condition Only a few minor cosmetic flaws - 1 Only one item available 2nd LIFE warranty: 6 months Breakaway blades have been growing in popularity in our industry for several years. It quickly became apparent that a knife equipped with this type of blade would be ideal for cutting the bottom adhesive strip when working on automotive glass....

Reference: FB207

Hook blade with L shape - 25,4 mm

profondeur de coupe : 25,4 mmvendue à l'unité

Reference: DST-734BUS

T-handle wire threader special bus and trucks

Special wire threader for bus and trucks with 2 holes ( for square or braided wire and nylon wire.) The end of the needle has a special designed in order to introduce easy the wire through the urethane. Push it in the urethane, insert the wire inside the tube, remove the wire threader and lead the wire throughout the urethane, in order to be able to pic...

Reference: DESTOCK-FRE-080-P

Retention device: metal strip and trim caps

To prevent the corners of hubcaps from sticking out, they are often attached with adhesive tape. However, this method carries risks: adhesives can react chemically with the vehicle's paintwork, causing damage. The ideal solution? Our retaining tool, specially designed to secure hubcaps without compromising paint quality. Advantages : Optimum protection:...

Reference: SD-21

Braided wire - ø 0,80 mm - 22.5M

Braided wire21 ml REPAREGLASSBraided wire The braided wire is made of three stainless steel resistant wires that are braided to one strand. The wire is anodized (with a traditional gold colour). It has a 0.80mm diameter.

Reference: FB111

Hook blade with U shape - 95 mm

profondeur de coupe : 95 mmvendue à l' unité

Reference: LBB-10

"Black" segmented rigid blades

Rigid blades "BLACK" segmented pack of 10 pieces for L2 and XL2

Reference: VKD-22A

Brand: REPAREGLASS

Squared cutting wire - Size 0.6mm - 22ML

Squared cutting wire REPAREGLASS Surprising, but true! The cutting force of square wire is far superior to that of common round wire. Try it out for yourself, you'll be amazed! REF-VKD-22 Square wire. 0.6 x 0.6 mm, length: 22 m, wound on plastic spool. 691 NEWTON