Cold knife blade

Reference: Z60

Special cold knife blade 60 mm

This blade series enables you to use a cold knife where you could never use it before ! The 60 mm long blade is intended to cut all those hard to reach PU bondings thatare far away from the glasses edge and where a normalcold knife blade could never reach. But also all lowerglass edges with surmounting wings and bonnets are aperfect field of application...

Reference: AIG-125

T-handles wire threader

Just lay the wire in the notched tip and pass it through the polyurethane by pushing the tool from the inside to the outside.In the way, you can release the window. Always place the flat surface of the wire threader on the window, so that the hollow tube is not deformed.- 120 x 26 x 10 mm - 20 g

Reference: MRC1105-R3

Hook for RAPTOR

The nylon rope holder hook is a tool specially designed to facilitate windshield cutting operations. It effectively holds the nylon rope in place during the operation, ensuring optimal tension and more precise handling. Robust and easy to use, this device improves control when cutting glass, while enhancing safety and efficiency in the workshop. Compact...

Reference: WK5

LONG FLAT BLADE 130MM

Long, flat blade 130mm

Reference: DST-58

Curved wire threader 58 mm (package at 3 pièces)

Curved wire threader:The curved wire threader anables threading of the cutting wire evenwhere the gap between glass and pinch weld is very small.This is especially helpful on side and back windows where conventionalwire threaders are often difficult to use.The curved threader can be pushed through the adhesive bead from insideto outside or from outside to...

Reference: WK1S

Serrated, long, flat BTB blade, 300mm

Serrated, long, flat BTB blade, 300mm

Reference: BOITE-TRANSP-N447

Clear Storage Box - N447 - 2ND vie

In very good condition Only 1 available 2nde VIE warranty: 6 months Storage case for all types of small parts Dimensions: 145 mm x 270 mm x 35 mm (H)

Reference: LT-415-1

5 adaptable eylets

5 replacement eylets

Reference: Z5

Cold knife blade, extra fine 25 mm

Cold knife blade, extra fine - Sold individually - Cutting length: 25 mm - 18g CARTON OF 10

Reference: FB072

Cutting blade, cranked - 45 mm

Cutting blade, cranked - 45 mm

Reference: FB101

Hook blade with U shape - 60mm

REF-FB-101 Hook blade with U shapeCutting length: 60 mmSold individually

Reference: DSS-175

One-man wire cut-out tool

One-man wire cut-out toolREPAREGLASSOne-man wire cut-out toolThis tool acts like another person sitting inside the vehicle pulling the wire back after you havemade your cutting stroke.Attached to the swivel is a spring that acts as a second person; you pull the wire out to make your cut and the springs pulls the wire back in. The spring is attached to a...

Reference: Z7RV

New Paint Protection Reverse Bend Blade 19mm « ULTRAWIZ »

Nylon coating protects exposed paint from accidental blade contactIdeal for exposed glass with underside molding or encapsulationOffers the control a technician needs to cut awayfrom the glass or moldingAvailable in 3 lengths : 19 mm – 25 mm – 38 mm

Reference: FB076

FEIN cutting blade, straight 35 mm (56 mm 12 g)

cutting length: 24mm 17g Sold individually

Reference: FB212

Serrated hook blade with U shape - 36 mm

Lame à crochet crantéeprofondeur de coupe : 36 mmvendue à l'unité

Reference: DESTOCK-FRE-080-P

Retention device: metal strip and trim caps

To prevent the corners of hubcaps from sticking out, they are often attached with adhesive tape. However, this method carries risks: adhesives can react chemically with the vehicle's paintwork, causing damage. The ideal solution? Our retaining tool, specially designed to secure hubcaps without compromising paint quality. Advantages : Optimum protection:...

Reference: FB123

Cutting blade, straight 40 mm

profondeur de coupe : 40 mm longueur totale : 74 mm vendue à l'unité

Reference: RCH-163

Flexible pull handle with neoprene coating

The REPAREGLASS flexible pull handle with neoprene coating is designed for comfortable and safe use during cold cutting. It has the same features as the classic ZDK-395 handle, with the added advantage of a neoprene coating that improves grip while protecting painted surfaces on the vehicle. Perfect for use with ZDK-395 cold cutting knives, this flexible...

Reference: WK27M

Left hand, BTB blade, 25mm

Lame BTB main gauche 25mm(utilisation manuelle ou pneumatique)

Reference: WK3

Multi-purpose, bent BTB blade, 200mm

Lame BTB multi-fonction plate 200mm(utilisation générale)

Reference: FSC1.7B2

FEIN battery-powered knife - without blade, with battery

Discover a powerful, precise and completely autonomous solution for your automotive work. This FEIN cordless knife is designed to meet the highest demands of glass professionals, combining mobility, performance and reliability. Technical specifications: Battery voltage: 18 V Battery capacity: 5 Ah Oscillations: 10,000 - 19,500 rpm Amplitude: 2 x 1.7°...

Reference: FSC1.7BAT-SET

Set of 2 x 18V - 5A batteries + 1 charger for FEIN FSC1.7 cordless knife

Set of 2 18V - 5A batteries + 1 charger for FEIN FSC1.7 cordless knife Optimise the runtime and power of your FEIN cordless knife with this high-capacity Li-ion battery. Designed for demanding professionals, it delivers reliable performance and extended runtime for intensive work. Key features of the battery: 18V voltage: Optimal power to meet the needs...

Reference: EGK150

Pneumatic knife: EQUALIZER ® Ninja GT Deluxe

The Ninja™ GT Deluxe is the improved and reinforced version of the famous Ninja™ pneumatic knife. Designed for the most demanding cold cutting applications, it features two ball bearings, a more powerful motor and an exhaust silencer that redirects air away from the vehicle for optimal working comfort. Exceptional performance and versatility: Optimized...

Reference: CROP-S

Brand: REPAREGLASS

Pointed hook, with short shaft

Pointed hook, with short shaft- 200 x 35 x 35 mm - 122g

Reference: MSP-211

BOX EXTRACTOR

Arm wiper pullers kit If you remove a bolted on windshield wiper a few months after the vehicle was builtthen it is usually not difficult to remove, but try removing the wiper arm two or threeyears after it was built. It can be almost impossible because manufacturers use onetype of metal on the wiper arm and a different type of metal on the wiper post. If...

Reference: 848031AIGUILLE

Needle to guide the wire upper the metal tabs from the car

Needle  to guide the wire upper the metal tabs from the car .

Reference: ENK148

Pneumatic knife: EQUALIZER ® Ninja deluxe

The Equalizer® Ninja Deluxe kit is the essential tool for glass professionals for fast, precise and efficient cold cutting. Suitable for all types of vehicles, this pneumatic knife combines power, ergonomics and maneuverability, with up to 22,000 oscillations per minute for effortless work, even in the most complex areas. Key features: Exceptional...

Reference: TQ-1438

Angular scraper blades (x10) 16mm-53°

Angular scraper blades (x 10) 16 mm - 53° • Package 10 pcs The angular scraper blades facilitate the scraping of old urethane from the corners of the pinchweld.

Reference: XKD-22A

New square cutting wire, Size 0.7 mm - 22ML

Reference: Z3

Cold knife blade 38 mm

Cold knife blade, extra fine- Sold individually- Cutting length: 38 mm- 20 gCARTON OF 10