• VBSA awarded ECOVADIS label

  • Banner

Door panel clips for Renault Laguna II, Laguna III, Megane III, Kangoo II vbsa France
  • Door panel clips for Renault Laguna II, Laguna III, Megane III, Kangoo II vbsa France
  • Door panel clips for Renault Laguna II, Laguna III, Megane III, Kangoo II vbsa France

Door panel staples

VB68255

Sold in packs of 10

Type: Door panel staples

Color: White

Please log in to your account to display prices
Quantity

Description

compatible brands : 

For Renault

Laguna ll, Laguna III, Megane III, Kangoo II

Door - Panel

Laguna ll, Laguna III, Megane III, Kangoo II

Internal coatings

Product Details
VB68255
You might also like

Reference: 5555

Self-Adhesive Soundproofing Plate

Improve the acoustic comfort and durability of your vehicles with this versatile soundproofing plate. Key features: Self-adhesive: Fast, easy and time-saving application. Soundproofing and anti-vibration protection: Ideal for floors, doors, trunks, hoods and other sensitive vehicle areas. Exceptional malleability: Conforms perfectly to the shape of the...

Reference: DSB-2002

Self-adhesive polyethylene foam film

Effectively protect and soundproof car doors with this polyethylene foam film specially designed for professionals. Key features: Optimum protection: Acts as a barrier against vibration, moisture and impact, extending door life. Effective soundproofing: Reduces external noise for improved acoustic comfort inside the vehicle. Self-adhesive: Easy to apply...

Reference: CGE-148

Clip removal tool

Clip removal tool This tool is used to remove plastic clips on door linings. It fits easily down into the recessed area and then can slid under the head of the cowling clip. You then pull up on the center locking part and the clip can be removed. - 235 x 35 x 30 mm - 165 g

Reference: CCR-819

EQUALIZER® cowling clip removal tool

EQUALIZER® cowling clip removal tool If expension-type cowling worked the way they were designed, you would simply unscrew the plastic screw and the clip would come out. Unfortunately, they seldom work correctly. Our cowling clip removal tool has a small sharp screw that screws into the plastic head and pulls the screw out. The clip will then collapse and...

Reference: CS-696

Clipsaver door upholstery remover

EQUALIZER® ClipSaver door upholstery remover The front of the tool is tapered so it will fit easily under a clip. Spread the jaws slightly so they will go under and around the clip. Then, close the jaws and it removes the clip without damaging it. Great for the removal of door panels. - 230 x 76 x 51 mm - 205 g

Reference: PH-1355

Spatula curved to remove the clips

Curved Door Upholstery Remover For removing plastic fasteners in confined places. It is the same upholstery remover as the one shown above, but it is instended for use on the front part of the door where the door jam will often interfere with the removal of the door panel. Place the notch in the tool over the fastener and pry the fastener out the hole. It...

Reference: AP-6205

Tool declipsor

Tool declipsor SPRINGERTOOL The distinct precision curvature of the Springer Clip Removal Tool provides a varaible load distribution, safely moving the load point along the tool as more leverage is applied The tapered tip allows entry under closely fitted parts and the rounded edges avoid damage to the trim or vehicle. No matter a body shop you will be...

Reference: Q-BOND-PRO

Q-BOND PRO ultra-strong fast-drying universal adhesive for multiple substrates

Adhesive, filling and reiforcing powders for repairingQ-BOND professionnal kit Q-BOND is one of the finest products for repairing various types of breaks, cracks and other damages to wide range of items. It has received various awards for outstanding quality and superior performance. For more serious repairs there is the two-part system with unique...

Reference: GBM-27

27 PCS Trim Removal Kit

The essential tool for precise, safe disassembly of bodywork and interior components. This set of 27 spatula levers is specially designed to meet the needs of bodybuilders and garages. It makes it easy to dismantle mirror faces, interior trim and other delicate components, without requiring the use of other protection. Advantages: Safe work: Allows work...

Reference: G-KNYL

Pair of nylon gloves with polyurethane coating

Discover protective gloves that combine comfort and precision, perfect for detailed work. Made of flexible nylon, they offer excellent dexterity while guaranteeing a secure grip thanks to their polyurethane coating. Characteristics: Flexible and snug: Fit the hand perfectly for optimal comfort Polyurethane coating: Ensures better grip and increased...

Reference: CTD-607

Recessed Cowling Clip Remover

Recessed Cowling Clip RemoverSome self-locking cowling clips are recessed down into the cowling. They are not the type that look like a Phillips or TORX®screw, but are the type that can be removed with a tool like the CGE-148. The only problem is the TPE657 will not reach downinto the recessed area and go under the head of the clip. If you manage to force...

30 other products in the same category:

Reference: FZS-128

Large PVC hood protection covered with foam.

HOOD PROTECTION - 1400 x 1840 mm Several sizes available: FENDER PROTECTION: Suitable for fender protection - 1400 x 800 mm FRONT PROTECTION: Suitable for front panel protection - 1900 x 700 mm CUSTOM-MADE: Please contact us – Please note that the width of the fabric must not exceed 140 cm Can also be made to measure on request for glazing, lorries,...

Reference: DGL-201S

Wire gripping handle with sucker

This handle can be stuck to the glass to go around the vehicles front and grab it from the other side a real good idea and a really handy tool!

Reference: PSD6

Bay cleaning blades (scraper not included) - 6 mm

The 6 mm diameter windshield cleaning blades are designed to effectively remove excess adhesive from the windshield seal, particularly in curved areas and hard-to-reach edges. Their specific shape allows for precise cleaning while reducing the risk of damage to the paintwork, unlike standard scraping blades. Also available in 12 mm rectangular (REF-PS-12)...

Reference: CAISSE-N445

Storage Case - 2ème VIE - N445

In good condition Only a few minor cosmetic flaws are visible - Only 1 item available 2nde VIE Warranty: 6 months Storage case Length: 505 mm - Width: 225 mm - External Height: 240 mm

Reference: SD-22

Braided wire in a spool - - ø 0,80 mm - 22ML

Braided wire in a spool REPAREGLASS ø 0.80 mm, length: 22 m, Wound on a plastic spool. 1083 NEWTON The wire to be cut is twisted according to our exact specifications from three strong stainless steel wires. The wire is anodised in a typical "gold" colour.

Reference: JU108

Universal mouldings • 25 mm x 22,8 m

Universal mouldingsExcellent forming and adhesion. Remain flexible even withlow temperatures. Butyl adhesive- No cracking, no weakness, no distorsion REF-JU108• 25 mm x 22,8 mFor T4 PLEASE ASK OUR KEYCHAIN SAMPLE WHICH WILL ALLOWS TO DISCOVEROUR UNIVERSAL MOULDING RANGE.Supplied with a detail list with many exemple of cars that cover.)

Reference: DST-734BUS

T-handle wire threader special bus and trucks

Special wire threader for bus and trucks with 2 holes ( for square or braided wire and nylon wire.) The end of the needle has a special designed in order to introduce easy the wire through the urethane. Push it in the urethane, insert the wire inside the tube, remove the wire threader and lead the wire throughout the urethane, in order to be able to pic...

Reference: 1020-029

220V charger for 20V POWERPUSH (old gun)

This 220V charger is designed to be compatible with the POWERPUSH 20V models of our older guns, in particular the references 5026-400-20V-EU and 5026-600-20V-EU. It allows fast and reliable recharging, guaranteeing optimal performance for your tools without interruption. Ideal for keeping your POWERPUSH battery-operated guns always ready for use, this...

Reference: PEZ-120

Anti-skid roof/hood liner

Protect the paintwork on your vehicle's roof or hood when you're working on it, with our non-slip protective canvas. Ideal for bodybuilders and garages, it offers a practical and safe solution for fitting tools, screws and small assembly equipment without the risk of damaging the vehicle's surface. Dimensions and weight : Dimensions: 1720 x 700 x 2 mm....

Reference: G-C0

Natural latex insulating gloves, honey color, non-contoured cuff

Ensure your safety when working with live equipment thanks to our insulating gloves in natural latex, specially designed to offer optimum protection against electrical risks. Compliant with the strictest standards, these gloves guarantee reliable insulation and increased resistance to extreme conditions. Compliance and Standards: EN 60903: 2003 -...

Reference: JM5

Anti-overflow foam gasket - 5.5m

A must-have for precise, clean and professional windshield installation. This anti-spill foam gasket is specially designed to guarantee a flawless finish when installing windscreens. Its main function is to compensate for irregularities and prevent excessive glue overflow, ensuring a uniform and neat application. It also contributes to a perfect seal and...

Reference: TUBE-POWERPUSH

Hose - Powerpush battery-operated pistol

Replacement tube specially designed for PowerPush battery-powered spray guns. Ideal for bonding and sealing work, this tube guarantees uniform and precise distribution of your product. Made of robust, chemical-resistant material, this tube ensures optimal longevity and intensive workshop use.

Reference: PSI-200

Double nylon seat panel cover

Effectively protect the interior of your vehicles with this one-piece double seat cover, ideal for automotive professionals. Applications : Ideal for workshops, garages and car cleaning services. Also suitable for jobs requiring temporary protection of vehicle interiors.

Reference: PWR-2017

18V Lithium Milwaukee cordless guns

18V Lithium Milwaukee cordless guns -Ejection pressure : 4500Nm -+ 20 % Speed -Upgrade performance up to 40 % compared to old version -Excellent for high viscosity PU -Red-Lithium Ion technology Réf: PWR-2017: Gun for cartridges 310 ml and saussages 400 ml