VBSA awarded ECOVADIS label
Banner
In fair condition
Overall condition: No issues
Cosmetic defects shown in the photos are present — Only one item available
2nde VIE Warranty: 6 months
Suction cup for holding the windscreen gasket cutting cord
Reference: SD-22
Braided wire in a spool REPAREGLASS ø 0.80 mm, length: 22 m, Wound on a plastic spool. 1083 NEWTON The wire to be cut is twisted according to our exact specifications from three strong stainless steel wires. The wire is anodised in a typical "gold" colour.
Reference: ZLN-914
- Multi-purpose with 1 length (approx. 2 to 4 uses) - Does not scratch surfaces - No snags on the windscreen bay or windscreen seal - Can be used with all ratchet systems - Very fine Ø 1.05 mm, Length: 100 M 2000 Newton
Reference: ROLL-OUT-2000
Windscreen cutting kitThis cutting tool allows to one operator only to cut outwindshields from inside the car.Supplied with DVD training and complete informations.
Reference: VKD-44A
Brand: REPAREGLASS
SQUARED CUTTING WIRE in a spool REPAREGLASS Surprising but true! The cutting resistance of the squared wire is far higher than the one of the common round wire. Try it, you will see!Squared wire - 0,6 x 0,6 mm,- length: 44m, on plastic spool.- 100 x 22 mm - 110 g
Reference: GCN-100
The high-performance nylon cutting cord is specially designed for thick and hard adhesive beads, particularly in automotive glass replacement. It meets the latest industry requirements by combining strength, durability, and safety in a single product. Thanks to its abrasion-resistant nylon composition, it offers smooth cutting performance without...
Reference: TRI-176
REF. TRI-176Triangular wire.0,85 x 0,85 mm,Length : 50 metersTensile strength : 691 Newton
Reference: RAPTOR
The Raptor™ is a cord and wire auto glass removal device designed from the ground-up to dramatically improve the power of the vacuum cup with the integration of our AirForce™ Constant Vacuum Cups. This technology has been specifically developed to create a quick placement and constant vacuum to the glass so the Raptor™ stays in place and resists...
Reference: AIG-789
Many technicians remove windshields by starting the wire through the top and bottom center of the windshield, then cutting towards each side. So as to push the cutting wire into the urethane, especially where there is a wide surface of urethane, we recommend using the wire threader. The slot (1,2 mm only) and the cutting wire are pushed together into the...
Reference: PTB-L
Set of 4 windscreen and dashboard cut-out protectors (HDPE) - High quality Comprising : - universal curved protector - universal straight protector - small universal curved protector - small universal straight protector REF. PTB-L
Reference: 8PZ010607-961
The Nissan 1-04 calibration target is used with Hella Gutmann CSC Tool and CSC Tool SE systems to perform ADAS front camera calibration according to manufacturer specifications. It enables precise calibration on Nissan vehicles and certain Mercedes-Benz models equipped with advanced driver assistance systems. The CSC Tool Nissan 1-04 target is part of...
Reference: DST-58
Curved wire threader:The curved wire threader anables threading of the cutting wire evenwhere the gap between glass and pinch weld is very small.This is especially helpful on side and back windows where conventionalwire threaders are often difficult to use.The curved threader can be pushed through the adhesive bead from insideto outside or from outside to...
Reference: JMFE
The ideal solution for perfect soundproofing and optimum fit between dashboard and windshield. Advantages : Easy to fit: Integrated adhesive ensures fast, reliable attachment. Vibration reduction: Improves acoustic comfort in the cabin by reducing noise and friction. Versatility: Suitable for both repairs and replacement of the original gasket.
Reference: RACCORD1-4FEMELLE
This connector is designed to provide a quick, reliable, and leak-proof connection between your guns and your compressed air source. Made from robust and durable materials, it guarantees safe and optimal use in workshop conditions.
Reference: 432
Give your hands an effective and gentle clean with our hand cleansing soap in paste form, specially designed to remove stubborn dirt without damaging the skin. Sand-free and solvent-free, this soap respects the epidermis thanks to its protective and fatty agents, guaranteeing a powerful yet gentle clean. After use, it leaves a moisturizing cream effect...
Reference: CHAMB
The microfiber for windows and polishing 40 x 40 cm is the ideal tool for high-precision cleaning applications. With its composition of 70% polyester and 30% polyamide, this high-tech microfiber offers exceptional performance for cleaning car windows and polishing automotive surfaces. It is an effective replacement for traditional chamois leathers and...
Reference: DSB-2002
Effectively protect and soundproof car doors with this polyethylene foam film specially designed for professionals. Key features: Optimum protection: Acts as a barrier against vibration, moisture and impact, extending door life. Effective soundproofing: Reduces external noise for improved acoustic comfort inside the vehicle. Self-adhesive: Easy to apply...
Reference: EVOL-SANGLE-C
Brand: L'ULTRAPOSE
This new strap facilitates greater adjustability, allowing optimised use of the ultrapose Evolution on commercial vehicles.
Reference: SK130
Replacement blade for fsl 240 pinchweld scraper l:16mm
Reference: CM-536
Magnetic bowlThe bowl can be placed almost everywhere on a vehicule because the bottom has a rubber cover to avoid scratches. The strong magnet surely holds thebowl itself and all magnetic content.Diameter:140 mm
Reference: WK4Z
Deep offset, multi-purpose BTB blade, 140mm
Reference: NSE-827
Delivered without castors
Reference: DESTOCK-GAVI
Size L - Note: Only 6 units in stock Size XL - Note: Only 20 units in stock Anti-vibration glovesThese gloves limit the effects of vibrations caused by the use of cutting knives (pneumatic and power tools in general).They reduce the effects of shock, vibration and impact. Comfortable to wear thanks to its seamless knitted shell. Good breathability....
Reference: KPM-5057
Version : DAF Quantité : 5 pièces
Reference: DLH-511
Double-end moulding release tool This heavy-duty tool is made of steel so it will not bend. It has a small rubber spacer through each end to the tool up off the glass about 1 mm. This is important for two reasons. First, it prevents the tool from scratching the glass. Secondly, it holds the end above the glass so there is less chance the tip will catch...
Reference: PRP21-OCCASION
OCCASION AUTOMATIC PISTON - Used for our customer demonstrations. Only one piston available Replaces the manual plunger, automatically sucks in the suction cup when the button is pressed, can be used manually if the battery is flat. 5-hour autonomy Supplied with USB-C charging cable Fits ULTRAPOSE1, ULTRAPOSE3, VP-230 and VP-230SPECIALE
Reference: 1040-037
Optimize the use of your POWERPUSH battery-operated spray gun with this specially designed 310 ml cartridge holder. Made of a robust and durable material, it holds the 310 ml cartridge firmly during application, ensuring precise and even distribution of the product. This holder is an essential accessory for ensuring practical and efficient use of your...
Reference: 1040-192
Ensure the watertightness and protection of your POWERPUSH battery powered spray gun with this specially designed end cap. Made of a robust and resistant material, it keeps the contents of the tube in place, thus avoiding any leakage or loss of product during use or storage. This cap is an essential accessory to guarantee the durability and performance of...
Reference: SHL-109
Our high-protection knit gloves offer excellent comfort and optimal resistance. Made of cotton and nylon, they are very strong while remaining comfortable to wear. Thanks to their non-slip coating and internal traction points, they guarantee effective protection against cuts while preserving good tactile sensitivity. Characteristics: - Material: Cotton...
In fair condition
Overall condition: No issues
Cosmetic defects shown in the photos are present — Only one item available
2nde VIE Warranty: 6 months
Suction cup for holding the windscreen gasket cutting cord
