VBSA awarded ECOVADIS label
Banner
Solvent-based cleaner with adhesion-activating properties for pre-treating direct bonded pro windshields,
Single-application wipe-off.
Various packaging options:
30ml bottle - Ref.520-30 - Sold individually or in boxes of 25
250 ml bottle - Ref.520-250 - Sold individually or in boxes of 12
1L bottle - Ref.520-1 - Sold individually or in boxes of 12
Select your packaging below.
Reference: 768
Effectively remove traces of oil, insects and dust with the foam-based 768 glass/windscreen cleaner. Ideal for use in industry, the automotive sector and construction, this product ensures impeccable cleanliness of glass surfaces. Characteristics: Powerful action: Dissolves traces of oil, insects and dirt in an instant Multi-purpose: Suitable for...
Reference: 501FC-310
FOR VOUR SAFETY Our windshield bondings have been tested and validated by TUV (crash tes!) + OEM (used by manufac!urers as original equipment). Standard FMVSS208/212. Products on the market for over 20 years. FAST-drying, one-component polyurethane bonding agent that reacts with humidity in the air to form a strong and elastic seal. The adhesive is...
Reference: GL-1153
TEMPERATURE CONTROL DEVICE FOR PB glue cartridges and cans in 12 or 24 V DC and 230 V AC keeps cartridges at the right temperature, cigarette lighter connection. Input voltage (AC), [V]: 220-240 Input voltage (DC), [V]: 12/24 - Cools down to 27 ºC below ambient temperature and heats up to +65 ºC - Active battery protection prevents deep discharge of the...
Reference: 530-30
Our glass/metal primer is a black, the curing of which is both physical and chemical.content solvent to prepare the windshield and the pinchweld befor the bonding. Primer 530 promotes polyurethane adhesion and protects against UV rays. It also has preventive anti-corrosion properties. If there are traces of rust on the bodywork, it is imperative to use...
Reference: 501K-310
FOR VOUR SAFETY Our windshield bondings have been tested and validated by TUV (crash tes!) + OEM (used by manufac!urers as original equipment). Standard FMVSS208/212. Products on the market for over 20 years. FAST-drying, one-component polyurethane bonding agent that reacts with humidity in the air to form a strong and elastic seal. The adhesive is used...
Reference: VKD-22A
Brand: REPAREGLASS
Squared cutting wire REPAREGLASS Surprising, but true! The cutting force of square wire is far superior to that of common round wire. Try it out for yourself, you'll be amazed! REF-VKD-22 Square wire. 0.6 x 0.6 mm, length: 22 m, wound on plastic spool. 691 NEWTON
Reference: 6200
Ideal for protection and fixing, our reinforced black fiber-reinforced adhesive tape is specially designed to protect sensitive surfaces such as mudguards, hood corners or roofs when cutting a windshield. Ultra-resistant, it is also very effective for holding freshly installed windows in place, thus preventing them from lowering after installation. Thanks...
Reference: PB-1349
Clean and decontaminate effectively with our pre-impregnated wipes specially designed to remove glue, grease, silicone and other impurities. Features: Highly effective: Removes polyurethane, grease and dirt Multi-purpose: Cleans hands, tools, workbenches and toolboxes Silicone decontamination: Ideal for preparing a windshield before installation Pleasant...
Reference: KB-1228
Pack of 50 rubber blocks for perfect positioning when bonding the windshield. Position the blocks before bonding your windshield once you've finished preparing the bay. L:2.5 cm x W:1.5cm x E:0.9cm
Reference: POSTER-CPB
Windshield bonding process poster ( including technical different steps ) for a proper use Available for export only with a product order. No delivery possible on its own
Reference: BOB-CHAM
Wadding cleaning paper PEFC certification, PEFC Label. Suitable for food contact Controlled consumption thanks to sheet-by-sheet distribution. Sheet dimensions: 340 x 257 mm - perforated. Roll length: 350 m Diameter of the roll: 30 cm Grammage: 2 x 19g/m². Pack of two rolls of 1000 sheets = 2000 sheets Sold in sets of 2...
Reference: GCN-100
The high-performance nylon cutting cord is specially designed for thick and hard adhesive beads, particularly in automotive glass replacement. It meets the latest industry requirements by combining strength, durability, and safety in a single product. Thanks to its abrasion-resistant nylon composition, it offers smooth cutting performance without...
Reference: XKD-44A
Discover our new REF-XKD-44 square piano wire, designed to offer exceptional strength and meet the most demanding needs. Applications: Used for precise cutting of windscreens and automotive glazing, this rope is a must-have for bodybuilders and garages. Its sturdy, square design ensures a firm grip and greater efficiency when removing glass and similar...
Reference: BOB-FIBRE
Ecological wiping spool 100% recycled product Milk carton ECOLOGICAL WIPING SPOOL MADE OF CELLULOSE FIBRES PACK OF 2 ROLLS OF 1000 SHEETS Advantages: No discoloration No delamination or linting More absorbent than chamois rolls Raw material: cellulose fibre Sheet size: 220x300mm Roll length: 300m Diameter: 28cm Grammage: 18.5 ±1g Sold in sets...
Reference: DEC-50
This decontamination process is imperative if the windshield bonding is to last. The thermoformed packaging produces a chemical reaction on your windscreen, making it difficult to bond without a decontamination step before bonding. Thermoforming is carried out under a source of heat, which causes an excess of silicone on the surface, preventing the...
Reference: MICRO-CARBON
Optimize your cleaning with our carbon fiber microfiber, designed for a flawless result on windows without leaving streaks or residue. Thanks to advanced carbon fiber technology, this ultra-soft microfiber effectively captures dust, dirt and fingerprints, while eliminating traces of water and cleaning products. Washable and reusable, it guarantees...
Reference: SU1423
Optimize your workspace with this wall-mounted wipe holder, designed for quick and convenient access to wipes REF-PB-1349 (box not included). Features: Easy wall mounting: Ideal for use in the workshop or garage Compatible with wooden racks: Can be installed on our dedicated supports Secure hold: Keeps the box of wipes firmly in place and always within...
Reference: 1336
Adhesive pads used by equipment manufacturers for interior rear-view mirrors. For interior mirrors Pack of 100 stickers.
Reference: KIT-PLV
Our POS kit is free, so don't hesitate to ask for it. POS kit containing: - A VBSA general range desk mat - A mouse pad - A special windshield gluing poster (methodology) - A windshield repair poster (methodology) - A special windshield tools poster - A special windshield decontamination poster
Reference: PLA0334-DESTOCK
Plastic bottle for primer, cleaner, etc…
Reference: TOLE1
Vintage Decorative Plaque VBSA – Bonding – Limited Edition N°1 Bring a touch of authenticity and retro style to your home with this unique decorative plaque. Crafted from durable metal sheet, it combines vintage charm with long-lasting quality. Features: Limited Edition – N°1 from the bonding VBSA collection Dimensions: 30 cm (length) x 20 cm (width)...
Reference: FLEXIBLEPEN100
This 60 cm hose is the ideal tool for applying hollow-body aerosol products in hard-to-reach areas. Its length enables the product to be effectively sprayed inside closed cavities, ensuring optimum anti-corrosion protection. Features: - 60 cm length to reach inaccessible areas - Even product distribution in cavities - Compatible with hollow-body aerosols...
Reference: 501FC-310
FOR VOUR SAFETY Our windshield bondings have been tested and validated by TUV (crash tes!) + OEM (used by manufac!urers as original equipment). Standard FMVSS208/212. Products on the market for over 20 years. FAST-drying, one-component polyurethane bonding agent that reacts with humidity in the air to form a strong and elastic seal. The adhesive is...
Reference: BOB-FIBRE
Ecological wiping spool 100% recycled product Milk carton ECOLOGICAL WIPING SPOOL MADE OF CELLULOSE FIBRES PACK OF 2 ROLLS OF 1000 SHEETS Advantages: No discoloration No delamination or linting More absorbent than chamois rolls Raw material: cellulose fibre Sheet size: 220x300mm Roll length: 300m Diameter: 28cm Grammage: 18.5 ±1g Sold in sets...
Reference: 769
Effectively remove traces of oil, insects and dust with 769 foam-based glass/windscreen cleaner. Ideal for use in industry, the automotive sector and construction, this product ensures impeccable cleanliness of glass surfaces. Characteristics: Powerful action: Dissolves traces of oil, insects and dirt in an instant Multi-purpose: Suitable for...
Reference: 505HM-290
MS-POLYMER is a high modulus, low conductivity, whithout isocyanate, multi-supports windshield bonding. FMVSS212 certified MS polymer bonding is normally used for bonding glass / textile or canvas (e.g. cabriolet, etc.). Drying time: 1 hour with 2 airbags Packaging : 290 ml cartridge: Sold individually or in box of 12. Select your packaging below:
Reference: BOITE-TAMP
This professional storage box is designed to keep applicator swabs in optimal conditions, protected from moisture and contaminants. It ensures consistent application quality of critical products such as primer, essential for windshield bonding operations. ⚠️ Important: the box is sold empty (no swabs included). Technical features: Type: Storage box for...
Reference: APC-150
A WOOL APPLICATORS FOR FRAME: length : 150 mm Small wool applicator with small head, wood handle. Pack of 150
Reference: 9505140
The KNIPEX rubber and universal joint cutter is a high-quality professional tool designed to cut various types of rubber joints easily and precisely. Its sturdy, ergonomic design makes for a comfortable grip and high precision when cutting. Ideal for bodybuilders, garages and other professionals who need to cut gaskets cleanly, these pliers are suitable...
Reference: KIT501FC-HM-LC-HV-400
FOR VOUR SAFETY Our windshield bondings have been tested and validated by TUV (crash tes!) + OEM (used by manufac!urers as original equipment). Standard FMVSS208/212. Products on the market for over 20 years. SAVETY DRIVE-AWAY TIME 501FC-HM-LC-HV: Curing time (23°-50%) Airbags: 30 minutes Our 501FC windshield bonding kit contains : - 1x 310 ml cartridge...
Reference: GRAISSE-JOINT
Optimize the maintenance and durability of rubber seals with our Rubber Seal Grease - 1kg, a product specially designed for bodywork professionals and garages. Applications: Ideal for maintaining door, trunk and windshield seals. Protects seals subjected to extreme thermal variations, UV and chemical exposure. Reduces squeaking and improves joint...
Reference: 3300-BUSE
Nozzle for bonding 3300 and LOCTITE L3090 Pack of 10
Reference: 503-HMLC-400
The 503 HM LC is a next-generation polyurethane windshield adhesive, developed to enhance installation safety, application control, and workshop productivity, in direct response to professional demands. Its denser and less fluid formulation provides excellent bead stability, preventing sagging even on large glass surfaces. The adhesive offers outstanding...
Reference: 601M
Effectively protect vehicle interiors with this special glass breakage film. Key features: Optimum protection: Prevents water and dust from entering the vehicle before replacing broken or damaged glass. Special glass breakage film: Ideal for maintaining temporary protection while ensuring the safety of occupants and interior equipment. Lightly adhesive:...
Reference: POSTER-PRIMERLESS
Primerless windshield bonding poster (PRIMERLESS) detailing the various stages in the bonding process for automotive glass. Available for export only with a product order. No delivery possible on its own
Reference: BD12
Pre-cut nozzles for 400 or 600ml windshield bonding saussages. Pack of 12 pre-cut nozzles
Reference: VB4000103
Sold in packs of 10 L:3cm x W:0.5cm x D:0.5cm for perfect positioning when sticking to the windshield.
Reference: DEC-50
This decontamination process is imperative if the windshield bonding is to last. The thermoformed packaging produces a chemical reaction on your windscreen, making it difficult to bond without a decontamination step before bonding. Thermoforming is carried out under a source of heat, which causes an excess of silicone on the surface, preventing the...
Reference: VB4000409
Self-adhesive rubber blocks - Pack of 10 L:3cm x W:0.6cm x E:0.6cm for perfect positioning when bonding the windshield.
Reference: BIGKIT-ECO503FC400
BIG KIT "Economy" version SAVETY DRIVE-AWAY TIME 503FC: Curing time (23°-50%) Airbags: 1 heure If you regularly change windshield bonding, choose our BIG KIT for better cost- efficiency. Our 501FC windshield bonding BIG kit contains : - 12 Windshield bonding Saussage 400ml 503FC- 6 Saussage nozzles- 1 Primer 100ml- 12 felt applicators A BIG-KIT palet...
Reference: MICRO-CARBON
Optimize your cleaning with our carbon fiber microfiber, designed for a flawless result on windows without leaving streaks or residue. Thanks to advanced carbon fiber technology, this ultra-soft microfiber effectively captures dust, dirt and fingerprints, while eliminating traces of water and cleaning products. Washable and reusable, it guarantees...
Reference: 530-30
Our glass/metal primer is a black, the curing of which is both physical and chemical.content solvent to prepare the windshield and the pinchweld befor the bonding. Primer 530 promotes polyurethane adhesion and protects against UV rays. It also has preventive anti-corrosion properties. If there are traces of rust on the bodywork, it is imperative to use...
Reference: 3318
Glass and mirror bonding adhesive with primer activator (. Bodywork repair - Bonding glass - Glass-to-metal bonding For fixing mirror bases, deflector locks and any glass/metal or metal/metal assembly. Advantages : Suitable for bonding rigid, close-fitting metal or ceramic assemblies The product polymerises in the presence of the activator, applied to...
Reference: KB-1228
Pack of 50 rubber blocks for perfect positioning when bonding the windshield. Position the blocks before bonding your windshield once you've finished preparing the bay. L:2.5 cm x W:1.5cm x E:0.9cm
Reference: S-120
Butyl mastic sealant is a flexible, non-polymerisable synthetic elastomer-based butyl mastic with a wide range of applications, providing a watertight seal between manhole covers. For bonding glass, motorhome skylights, louvres, doors, etc. Diameter: 9.5 mm Length: 4.5 m Colour: black Packaging: Rn roll
Solvent-based cleaner with adhesion-activating properties for pre-treating direct bonded pro windshields,
Single-application wipe-off.
Various packaging options:
30ml bottle - Ref.520-30 - Sold individually or in boxes of 25
250 ml bottle - Ref.520-250 - Sold individually or in boxes of 12
1L bottle - Ref.520-1 - Sold individually or in boxes of 12
Select your packaging below.
