VBSA awarded ECOVADIS label
Banner
Highly recommended for optimal handling and better cutting control, this handle improves the precision and stability of the tool, especially during complex or prolonged cutting tasks.
An essential accessory for getting the most out of your FEIN cordless knife.
Discover an innovative, high-performance solution for automotive work, combining power, precision and practicality. Technical specifications:
Please note: Supplied without blade, battery or charger. - Battery 18V - 5A REF. BAT18-FSC1.7 - Charger REF. CHARG-FSC1.7 |
FEIN battery knife - without blade, without battery
€0.00 |
|
Optimize your cutting tasks with this FEIN battery-powered knife, a high-performance tool designed to meet the needs of demanding professionals. Supplied with a complete set of 12 blades, two batteries and a charger, it offers everything you need for precise, efficient cutting. Key features:
|
FEIN battery knife + 12 blades
€0.00 |
|
Discover a powerful, precise and completely autonomous solution for your automotive work. This FEIN cordless knife is designed to meet the highest demands of glass professionals, combining mobility, performance and reliability. Technical specifications:
Included:
|
FEIN battery-powered knife - without blade, with battery
€0.00 |
Reference: EGK150
The Ninja™ GT Deluxe is the improved and reinforced version of the famous Ninja™ pneumatic knife. Designed for the most demanding cold cutting applications, it features two ball bearings, a more powerful motor and an exhaust silencer that redirects air away from the vehicle for optimal working comfort. Exceptional performance and versatility: Optimized...
Reference: ENK148
The Equalizer® Ninja Deluxe kit is the essential tool for glass professionals for fast, precise and efficient cold cutting. Suitable for all types of vehicles, this pneumatic knife combines power, ergonomics and maneuverability, with up to 22,000 oscillations per minute for effortless work, even in the most complex areas. Key features: Exceptional...
Reference: FB123
profondeur de coupe : 40 mm longueur totale : 74 mm vendue à l'unité
Reference: SB-880
When working with glass, wearing protective eyewear is essential to ensure eye safety against shards and debris. Our shatterproof glasses offer side and front protection thanks to their ergonomic design. They can be worn over most prescription glasses, ensuring optimal comfort for all users. Features: - Complete protection: Protects the eyes against...
Reference: KIT-BTB
The BTB Kit is a complete, high-performance pneumatic solution for cutting windshields quickly and efficiently, whether from inside or outside the vehicle. Designed to minimize physical effort, its ultra-lightweight knife (1.1 kg) ensures easy and comfortable handling, even during long jobs. Very quiet and compliant with European Directive 2002/44/EC on...
Reference: PWR-2020
Easily locate leaks invisible to the naked eye with this ultrasonic air/water leak detector, specially designed to check the tightness of bonded windows after installation. The system consists of a transmitter, placed inside the vehicle, which emits inaudible ultrasonic waves, and a receiver equipped with a directional microphone. By moving the receiver...
Reference: CC-1058
Our nitrile gloves provide an excellent biological barrier while guaranteeing optimal comfort thanks to their elasticity and stretchability. Designed without latex, they reduce the risk of allergies while providing effective protection against viruses and chemicals. Powder-free, they minimize the risk of contamination and are suitable for environments...
Reference: F1K
PRIMERLESS windshield bonding. FAST PRIMERLESS application is different from the traditional application, it consists of using our F1 activating cleaner followed by the "F1K" polyurethane bonding agent compared to the traditional application composed of 3 products (degreaser, primer and bonding). VEHICLE CURING TIME Curing time (23°-50%) Airbag: 1 hour -...
Reference: F1FC-310
PRIMERLESS windshield bonding. ULTRA FAST PRIMERLESS application is different from the traditional application, it consists of using our F1 activating cleaner followed by the "F1fc" polyurethane bonding agent compared to the traditional application composed of 3 products (degreaser, primer and bonding). VEHICLE CURING TIME Curing time (23°-50%) Airbag: 30...
Reference: FB110
REF-FB-110 Lame à crochet en U Profondeur de coupe 40 mmvendue à l’unité
Reference: FB101
REF-FB-101 Hook blade with U shapeCutting length: 60 mmSold individually
Reference: CG-200-GVF
The Standard Pneumatic Rubber Cutter is designed to quickly and effortlessly remove windshields by cutting through adhesive with its efficient oscillating blades. Its built-in speed regulator allows for precise control during use, while the blades can be adjusted to 12 different positions to suit all configurations. Compact and easy to maneuver, it is...
Reference: WK10HD
The BTB pneumatic knife is the ideal tool for quick and precise cutting of windshields, both inside and outside the vehicle. Compact, lightweight (1.1 kg) and easy to handle, it significantly reduces physical effort for the user while offering optimal cutting performance. Its design reduces the risk of blade overheating and impact on the glass. Supplied...
Reference: G-KNYL
Discover protective gloves that combine comfort and precision, perfect for detailed work. Made of flexible nylon, they offer excellent dexterity while guaranteeing a secure grip thanks to their polyurethane coating. Characteristics: Flexible and snug: Fit the hand perfectly for optimal comfort Polyurethane coating: Ensures better grip and increased...
Reference: 5027-600-18V-EU
Powerpush 18V battery-powered gun 600ml, supplied without charger and battery The PowerPush gun is designed to deliver unrivalled power and optimum efficiency, guaranteeing smooth and effortless application of PU in all situations. Powerclutch transmission: improves extrusion recovery speed for faster and more consistent application. Variable AutoReverse...
Reference: ZK35
The ZIPKNIFE cold knife is specially designed to provide optimal control when cutting windshields. Its unique shape keeps the cutting head firmly in place while ensuring great freedom of movement. Thanks to its ergonomic design, it allows effective force to be applied in both directions, making cutting easier even in hard-to-reach areas. This knife is...
Reference: DLH-511
Double-end moulding release tool This heavy-duty tool is made of steel so it will not bend. It has a small rubber spacer through each end to the tool up off the glass about 1 mm. This is important for two reasons. First, it prevents the tool from scratching the glass. Secondly, it holds the end above the glass so there is less chance the tip will catch...
Reference: MRL6
This scraper can be carried in the pocket - no risk of injury.The replacement of the blade is easy and secure. When not in use, the blade is simply flipped so as to avoid any injury. When you want to use the scraper, pull the closing device, flip the blade and your scraper is ready to use!1 Package of 6 pieces.- 50 x 44 x 38 mm - 45 g
Reference: PSH-120
Pairof suction cups (Ø 120 mm)Vacuum cups allow you to hold safely a window that is ready to install. The edge of the window must not be touched once the window is ready for the installation. Each vacuum swivels up and down approximately 30° to fit radically contoured glass. Simply set the vacuum cups in place and push the thumb latches down to engage the...
Reference: CANMAX-FULL22
Practical, sturdy, and mobile storage – Full version without glass cutting accessories The Full22 tool trolley is the ideal solution for professionals looking for an all-in-one, mobile, and modular storage system. Designed for optimal organization of your tools, it combines sturdiness, generous capacity, and ergonomics, while being perfectly suited to...
Reference: VP-230-N322
In very good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Heavy-Duty Piston Suction Cup Ø 230 mm – Lifting Capacity up to 380 kg Looking for a reliable suction cup for heavy glass handling? Our Ø 230 mm piston suction cup is engineered for professionals who demand maximum lifting...
Reference: 8PZ010611-931-DESTOCKAGE
Please note: Only 1 target available CSC TOOL - HYUNDAI 1-20
Reference: OPB
Windshield standWindshield stand with 4 articulated rubber plates for thepreparing and installing of bonded windows. As it is used on bench vices, it is very practical and no effort is needed to move it.
Reference: RL-170
Suction cup with handle diameter 70 mmDurable quality suction cup. Adaptable on glass, marble, ceramic.Ideal to remove and install quarter glass.Loading capacity : 12 kgREF. RL-170Sold individually
Reference: 432
Give your hands an effective and gentle clean with our hand cleansing soap in paste form, specially designed to remove stubborn dirt without damaging the skin. Sand-free and solvent-free, this soap respects the epidermis thanks to its protective and fatty agents, guaranteeing a powerful yet gentle clean. After use, it leaves a moisturizing cream effect...
Reference: ZAW-120
This professional wiper arm puller is designed for safe and efficient removal of wiper arms without damaging the windshield or mechanisms. Made from solid metal, it is suitable for almost all passenger vehicles and is especially recommended for current BMW 5 Series and BMW 7 Series models. Long description: This heavy-duty wiper arm puller is an essential...
Reference: 6200
Ideal for protection and fixing, our reinforced black fiber-reinforced adhesive tape is specially designed to protect sensitive surfaces such as mudguards, hood corners or roofs when cutting a windshield. Ultra-resistant, it is also very effective for holding freshly installed windows in place, thus preventing them from lowering after installation. Thanks...
Reference: BOITE-TRANSP-N447
In very good condition Only 1 available 2nde VIE warranty: 6 months Storage case for all types of small parts Dimensions: 145 mm x 270 mm x 35 mm (H)
Reference: 9005B
Dent suction cup. Grips very well on any surface (car body, glass, hood–).- Diameter: 115mm- Load capacity: 40kg- Sold individually
Reference: WK3S
Serrated, multi-purpose, bent BTB blade, 200mm
Reference: V54-N522
General condition: No issues, fair condition Only the cosmetic defects shown in the photos are present - Only one unit available 2nde VIE Warranty: 6 months Designed for extruding standard 310 ml cartridges and 400 ml cartridges, it ensures smooth, controlled and effortless application. Main features: Compatible with 310 ml cartridges and 400 ml...
Reference: VB72205
Sold in packs of 10 Type: Panel stopper Color: White Material: Acetal - POM
Reference: CTD-607
Recessed Cowling Clip RemoverSome self-locking cowling clips are recessed down into the cowling. They are not the type that look like a Phillips or TORX®screw, but are the type that can be removed with a tool like the CGE-148. The only problem is the TPE657 will not reach downinto the recessed area and go under the head of the clip. If you manage to force...
Reference: PSL-150-1VERIBOR
VERIBOR SUCTION CUPREF-PSL-150-1VERIBOR• Ø 150 mm : Loading capacity : 80 kg
Reference: DST-53
Curved wire threader:The curved wire threader anables threading of the cutting wire evenwhere the gap between glass and pinch weld is very small.This is especially helpful on side and back windows where conventionalwire threaders are often difficult to use.The curved threader can be pushed through the adhesive bead from insideto outside or from outside to...
Reference: VP-230SPECIALE-N338
In good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Ø 230 mm Piston Suction Cup – For Heavy Loads and Curved Glass Surfaces Designed for handling very heavy loads up to 350 kg, this professional Ø 230 mm suction cup is ideal for working with highly curved glass, such as bus...
Reference: KPM-5054
Version : MERCEDES ACTROS Quantité : 5 pièces
Reference: CSG400
This professional pneumatic gun is specially designed for extruding 400 and 600 ml cartridges. It operates using a piston system, providing a smooth and controlled application of adhesives and sealants, ideal for windshield bonding operations. The aluminum cylinder is easy to remove, allowing for quick cleaning or effortless cartridge replacement. Its...
Reference: SERV-CANMAX
Organize your tools efficiently with this mobile workshop trolley made from two materials, designed to offer robustness, practicality, and mobility in all your work environments. Its sturdy structure combined with two-material components ensures enhanced durability while providing optimal ease of use. Key features: Telescopic handle: makes transport easy...
Highly recommended for optimal handling and better cutting control, this handle improves the precision and stability of the tool, especially during complex or prolonged cutting tasks.
An essential accessory for getting the most out of your FEIN cordless knife.
