Charger for automated suction cup VP-230-E

Reference: MS-180

Installation stick

Reference: V54

VBSA 14.4V battery-powered gun

Designed for extruding standard 310 ml cartridges and 400 ml cartridges, it ensures smooth, controlled and effortless application. Main features: Compatible with 310 ml cartridges and 400 ml cartridges Supplied complete: 3.0 Ah Li-ion battery, fast charger (1 hour), carrying case Weight with battery: 2.75 kg Speed variator: precise adjustment on the...

Reference: TKS-100

Trapezoid blades

Trapezoid blades. In a pratical dispenser. Our replacement blades for utility knives are 0,6 mm thick, so they are very sturdy. These blades are in a safety dispenser with a suspension hook so as to avoid any risk of injury. You take new blades by sliding them out from the above side of the dispenser while youdispose of the worn out blades by sliding them...

Reference: VB3105002

White side clip

Sold in packs of 10 Weight: 0.0014 kg

Reference: FSB102

Saw disk ø 63 mm

disque de scie ø 63 mm vendu à l'unité

Reference: FB081

Cutting blade, cranked 60 mm

Lame à découper, courbe profondeur de coupe : 60 mm longueur totale : 85 mm vendue à l'unité

Reference: VB4000710

Canopy sheet metal staples

Sold in packs of 10

Reference: BOB-1.5-ROLL-OUT

Spool of 1.5km for roll-out 2000

Spool  of 1.5km - Round wire: 0.8 mm

Reference: VB56305

Door panel staples

Sold in packs of 10 Type: Panel stopper Color: White Material: Acetal - POM

Reference: 848031AIGUILLE

Needle to guide the wire upper the metal tabs from the car

Needle  to guide the wire upper the metal tabs from the car .

Reference: 113656

SET OF WHEELS - TOOL-BOX

Set of 4 wheels for handble rolling tool-box (Ref. CS-RC14)

Reference: VP-205-N353

Piston Suction Cup – Diameter 205 mm – Lifting Capacity 260 kg - Second Life - N353

Suction cup in very good condition - Please note: sold individually Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months SOLD INDIVIDUALLY – DELIVERED IN A CARRYING CASE This piston suction cup, with a 205 mm diameter, is specifically designed for heavy-duty lifting and handling. Its piston...

Reference: TS2016

GLASS SETTING/LIFTING TOOL FOR BUS AND TRUCKS

ULTRA-POSE BUS IS ADAPTED FOR THE REMOVAL AND INSTALLATION OF VERY LARGE WINDOWS BY A SINGLE OPERATOR (trucks, subways, buses, panoramic roofs...) ADVANTAGES Gearing system can be operated manually or with a screwdriver Wheel lock for straight forward and backward movement Foldable for easy transport and storage 1 person only to load and unload it from a...

Reference: VB3106001

Side windshield/roof clip

Sold in packs of 10 PB side clip, white

Reference: CS-RC-N405

Empty Toolbox with 4 Drawers and a Removable Tray (without Wheels) – Second Life – N405

In very good condition Only a few minor cosmetic defects – Only one unit available Second Life Warranty: 6 months Empty toolbox with 4 lockable drawers and a removable top tray. Central handle + 2 side handles for easy transport. Optional: Set of 4 wheels (2 with brake and 2 without) to facilitate mobility of the toolbox. Dimensions: L: 62 × W: 30 × H: 32...

Reference: JCS452

Compact C-clip remover

Compact C-clip removerC-clip removers are an item that every technician has inhis toolbox, but those C-clips removers will not alwaysfit into the tight spots and compound curves on somevehicles. The Compact C-clips remover has a flat designthat will let you use it from all sides. This handy tool isdefinitely one that no technician should be without.REF....

Reference: 6200BLU

Glazing protection tape - sticks to edges only

Ensure the safety of your windows during transportation with our blue adhesive tape, specifically designed to protect the edges of windows against impact and scratches. Thanks to its central strip without adhesive, it can be easily applied, even on curved windows, without the risk of leaving glue residue. It can be removed quickly and effortlessly,...

Reference: Z10RD

New COLD KNIFE BLADES SERRATED 19mm

REF-Z10RDNew ULTRAWIZ Cold knife bladeSold individually - Extra thin Cutting length: 19 mmCARTON OF 10

Reference: VP-230SPECIALE-N331

Piston suction cup Ø 230 mm - Load capacity 350 kg - Highly curved windshield - Second VIE -N331

In very good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Ø 230 mm Piston Suction Cup – For Heavy Loads and Curved Glass Surfaces Designed for handling very heavy loads up to 350 kg, this professional Ø 230 mm suction cup is ideal for working with highly curved glass, such as bus...

Reference: VB4000202

White windshield wedge

Sold in packs of 10

Reference: KPM-5059

Camera sensor adhesive pads for DAF - Set of 5

Version : DAF Quantité : 5 pièces

Reference: L2

Olfa® knife

Olfa®knife This knife is made of high impact plastic, has a stainless steel blade housing and a positive locking thumb wheel so that you can set the blade at any length. The back of the knife features a rubber grip that lets the knife rest comfortably in your hand and keeps it from slipping. The famous model. - 146 x 40 x 20 mm - 110 g

Reference: PSH125NA-DESTOCK

Pair of suction cups for flat windshields - Load capacity: 40 kg - Destock

Only 65 units in stock Pair of suction cups. The suction cups allow you to lift a flat glass pane ready for installation safely. Simply place the suction cups on the glass and press the levers down to create a vacuum. The glass pane can now be transported safely. Please note that these suction cups have been developed for a load capacity of: 80 kg...

Reference: SC316

Scraper blades for ref. FSC-300SPECIAL scrapers

16 mm scraper blades for ref. FSC-300SPECIAL- Package of 10 blades- 63 x 21 x 18 mm - 30 g

Reference: Z60

Special cold knife blade 60 mm

This blade series enables you to use a cold knife where you could never use it before ! The 60 mm long blade is intended to cut all those hard to reach PU bondings thatare far away from the glasses edge and where a normalcold knife blade could never reach. But also all lowerglass edges with surmounting wings and bonnets are aperfect field of application...

Reference: VB6102013

Windshield clips

Sold in packs of 10

Reference: VALISE+MOUSSE

Brand: L'ULTRAPOSE

Case only with foam for ULTRAPOSE 1 and 3

Case only with foam for ULTRAPOSE 1 and 3  Case sold without accessories. Dim. 840 x 390 x 150 cm

Reference: DES3-ROUL

Workshop trolley

Optimize the storage and movement of your tools with this three-tier workshop trolley made from durable composite material. Designed for professional use, it offers excellent stability and a large carrying capacity, while remaining easy to maneuver thanks to its sturdy casters. Perfect for garages, workshops, or maintenance areas, this trolley allows you...

Reference: WK24S

Long, serrated, deep offset, BTB blade, 240mm

Long, serrated, deep offset, BTB blade, 240mm

Reference: 8PZ010611-381

HOUSSE DE PROTECTION POUR CSC-TOOL ET CSC-TOOL-MOBILE

Housse de protection pour : CSC-TOOL CSC-TOOL-MOBILE