VBSA awarded ECOVADIS label
Banner
Adjustable windshield trestle with rubber plates with tool storage bag
115 cm x 182 cm x 88 cm
Load capacity: 180 kg
Rubber foot |
Rubber foot
€0.00 |
|
Adjustable windshield trestle with rubber plates |
Adjustable windshield trestle with rubber plates
€0.00 |
|
Adjustable windshield trestle |
Adjustable windshield trestle
€0.00 |
Adjustable windshield trestle with rubber plates with tool storage bag
115 cm x 182 cm x 88 cm
Load capacity: 180 kg
Reference: HDS-480NEW
Adjustable windshield trestleREPAREGLASS- width multi-adjustable for different lengths and weights so as carry all sizes of windshields.- Very sturdy version, load capacity up to 250Kg.- Made of electroplated steel, diameter: 30 mm.- Resistant foam at the base of the trestle.- 105 cm x 95 cm x 110 cm6.700 kg
Reference: 501FC-310
FOR VOUR SAFETY Our windshield bondings have been tested and validated by TUV (crash tes!) + OEM (used by manufac!urers as original equipment). Standard FMVSS208/212. Products on the market for over 20 years. FAST-drying, one-component polyurethane bonding agent that reacts with humidity in the air to form a strong and elastic seal. The adhesive is...
Reference: 520-30
Solvent-based cleaner with adhesion-activating properties for pre-treating direct bonded pro windshields, Single-application wipe-off. Various packaging options: 30ml bottle - Ref.520-30 - Sold individually or in boxes of 25 250 ml bottle - Ref.520-250 - Sold individually or in boxes of 12 1L bottle - Ref.520-1 - Sold individually or in boxes of 12...
Reference: 530-30
Our glass/metal primer is a black, the curing of which is both physical and chemical.content solvent to prepare the windshield and the pinchweld befor the bonding. Primer 530 promotes polyurethane adhesion and protects against UV rays. It also has preventive anti-corrosion properties. If there are traces of rust on the bodywork, it is imperative to use...
Reference: V54
Designed for extruding standard 310 ml cartridges and 400 ml cartridges, it ensures smooth, controlled and effortless application. Main features: Compatible with 310 ml cartridges and 400 ml cartridges Supplied complete: 3.0 Ah Li-ion battery, fast charger (1 hour), carrying case Weight with battery: 2.75 kg Speed variator: precise adjustment on the...
Reference: BOB-CHAM
Wadding cleaning paper PEFC certification, PEFC Label. Suitable for food contact Controlled consumption thanks to sheet-by-sheet distribution. Sheet dimensions: 340 x 257 mm - perforated. Roll length: 350 m Diameter of the roll: 30 cm Grammage: 2 x 19g/m². Pack of two rolls of 1000 sheets = 2000 sheets Sold in sets of 2...
Reference: ULTRAPOSE-EVOLUTION
Brand: L'ULTRAPOSE
This product has received significant recognition, having won the Bodywork of the Year 2017 award, which is a testament to its quality and innovation in the field. This system has several features and advantages that make it particularly attractive to professionals in the automotive bodywork and glazing industry: Motorised system for removing and...
Reference: RAPTOR
The Raptor™ is a cord and wire auto glass removal device designed from the ground-up to dramatically improve the power of the vacuum cup with the integration of our AirForce™ Constant Vacuum Cups. This technology has been specifically developed to create a quick placement and constant vacuum to the glass so the Raptor™ stays in place and resists...
Reference: BOB-FIBRE
Ecological wiping spool 100% recycled product Milk carton ECOLOGICAL WIPING SPOOL MADE OF CELLULOSE FIBRES PACK OF 2 ROLLS OF 1000 SHEETS Advantages: No discoloration No delamination or linting More absorbent than chamois rolls Raw material: cellulose fibre Sheet size: 220x300mm Roll length: 300m Diameter: 28cm Grammage: 18.5 ±1g Sold in sets...
Reference: DEC-50
This decontamination process is imperative if the windshield bonding is to last. The thermoformed packaging produces a chemical reaction on your windscreen, making it difficult to bond without a decontamination step before bonding. Thermoforming is carried out under a source of heat, which causes an excess of silicone on the surface, preventing the...
Reference: AP-100
Felt Applicators must be used to apply the primer or activating cleaner correctly to the Windshield or Bodyshop. Box of 100. Length 105 mm
Reference: BLACKNIT
Give your hands optimum protection with our powder-free black nitrile gloves, designed for professional, all-purpose use. Recommendations for use : Store in a cool, dry place, away from excessive heat (maximum temperature: 40°C). Open tin to be protected from UV rays and direct exposure to sunlight. Packaging: Sold in boxes of 100 pieces, ideal for...
Reference: VB36255
Sold in packs of 10 Type: Awning grille rivet Color: Black
Reference: V54RACK600
The 600 ml rack is an essential accessory for adapting your V54 gun for use with 600 ml cartridges. Designed specifically for this model, it allows for quick and efficient conversion, while ensuring smooth and consistent extrusion. Features: 600 ml rack for V54 gun Allows conversion of the gun to 600 ml format Quick and easy installation Compatible with...
Reference: JPB391
Plastic razor bladesThese plastic razor blades are suitable to remove stickers andlabels from glass surfaces.As the blade is made of plastic it cannot scratch the glass contraryto a metal blade that could.Box of 100 blades
Reference: PASTILLE-ROUGE
Red plastic washer specially designed to adapt Milwaukee 12V gun for use with 400 ml and 600 ml cartridges. It ensures perfect compatibility and optimal hold of the cartridge in the gun, guaranteeing smooth and controlled extrusion of the product.
Reference: SYSTEME-PROTECTION-DE-BAIE
Effectively protecting the windshield bay during cutting has long been a challenge for technicians. Traditional methods, such as inserting a protective shield between the glass and the bay, are often ineffective against the repeated vibrations and impacts of electric or pneumatic tools. These tools can displace or damage the protective shield, exposing...
Reference: DST-53
Curved wire threader:The curved wire threader anables threading of the cutting wire evenwhere the gap between glass and pinch weld is very small.This is especially helpful on side and back windows where conventionalwire threaders are often difficult to use.The curved threader can be pushed through the adhesive bead from insideto outside or from outside to...
Reference: L110
Simplify storage and use of your protective rolls with this reel on wheels. Key features: Versatile: This dispenser is designed to support a variety of rolls, such as electrostatic film, marouflage paper and other consumables, with rolls up to 1175 mm long. Adjustable, sliding “T” rod: Allows the roll to be locked at the desired height, offering...
Reference: MSP-211
Arm wiper pullers kit If you remove a bolted on windshield wiper a few months after the vehicle was builtthen it is usually not difficult to remove, but try removing the wiper arm two or threeyears after it was built. It can be almost impossible because manufacturers use onetype of metal on the wiper arm and a different type of metal on the wiper post. If...
Reference: CS-RC14
Toolbox on wheels Size: L:62 x W:30 x H:32 cm + 10cm in height with wheels 4 drawers of 22 x 20cm
Reference: FSC1.7
The FEIN electric knife is the ideal tool for automotive glazing professionals looking for efficiency, precision, and comfort. Designed for intensive use, it stands out for its lightweight, maneuverability, and advanced features that make even the most demanding cuts easy. Included: FEIN electric knife Sturdy carrying case for convenient storage ⚠️ Blade...
Reference: SERV-OPB-PRO-NUE
Reference: VP-230SPECIALE-N333
In very good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Ø 230 mm Piston Suction Cup – For Heavy Loads and Curved Glass Surfaces Designed for handling very heavy loads up to 350 kg, this professional Ø 230 mm suction cup is ideal for working with highly curved glass, such as bus...
Reference: V54TUBE-600
The 600 ml tube is designed to adapt your V54 gun for use with 600 ml cartridges or flexible pouches. Robust and easy to install, it allows quick conversion of the gun to meet the needs of automotive glazing professionals. Features: 600 ml tube for V54 gun Allows conversion of the V54 gun to 600 ml format Ideal for high-volume windshield bonding...
Reference: DESTOCK-AF1009
REF-AF1009Self oiling glass cutterDue to the translucent color, you can see how much oil is inthe cutter. It has an end cap with a seal so the oil will not leakfrom the end of the cutter.They are of the highestquality and havebecome one of themost-used glass cuttersin the world.• Sold individually
Reference: FB097-DESTOCK
FEIN curved blade - Z curve, with fixed depth stop Total length: 125 mm - Length of cutting edge: 58mm Unit
Reference: SB-880
When working with glass, wearing protective eyewear is essential to ensure eye safety against shards and debris. Our shatterproof glasses offer side and front protection thanks to their ergonomic design. They can be worn over most prescription glasses, ensuring optimal comfort for all users. Features: - Complete protection: Protects the eyes against...
Reference: WK4Z
Deep offset, multi-purpose BTB blade, 140mm
Reference: VP-230
Heavy-Duty Piston Suction Cup Ø 230 mm – Lifting Capacity up to 380 kg Looking for a reliable suction cup for heavy glass handling? Our Ø 230 mm piston suction cup is engineered for professionals who demand maximum lifting power, grip, and durability. Whether you're transporting bus windshields, curved glazing panels, or large flat glass, this suction cup...
Reference: JU108
Universal mouldingsExcellent forming and adhesion. Remain flexible even withlow temperatures. Butyl adhesive- No cracking, no weakness, no distorsion REF-JU108• 25 mm x 22,8 mFor T4 PLEASE ASK OUR KEYCHAIN SAMPLE WHICH WILL ALLOWS TO DISCOVEROUR UNIVERSAL MOULDING RANGE.Supplied with a detail list with many exemple of cars that cover.)
Reference: VP-230SPECIALE-N338
In good condition Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Ø 230 mm Piston Suction Cup – For Heavy Loads and Curved Glass Surfaces Designed for handling very heavy loads up to 350 kg, this professional Ø 230 mm suction cup is ideal for working with highly curved glass, such as bus...
Reference: NSE-826
9-compartment telescopic windshield rack. H: 800 mm x W: 845 mm x H: 635 mm Maximum height: 970 mm Weight: 32.80 kg Load capacity: 200 kg
Reference: ENK148
The Equalizer® Ninja Deluxe kit is the essential tool for glass professionals for fast, precise and efficient cold cutting. Suitable for all types of vehicles, this pneumatic knife combines power, ergonomics and maneuverability, with up to 22,000 oscillations per minute for effortless work, even in the most complex areas. Key features: Exceptional...
Adjustable windshield trestle with rubber plates with tool storage bag
115 cm x 182 cm x 88 cm
Load capacity: 180 kg
