Home

Reference: ULTRAPOSE-EVOLUTION-PSA

Brand: L'ULTRAPOSE

ULTRA-POSE EVOLUTION - NEW WINDSHIELD MOTORIZED FITTING/ LIFTING SYSTEM- SINGLE OPERATOR FOR CARS - SUV AND VANS

Technical movie: Vidéo

Reference: 935

Brand: REPARBRISE

Spheric carbide drillbite - double teeth - ø 10 mm

Reference: 1320

Brand: REPAR'VIT

REPAR'VIT® NEW GENERATION windshield impact repair kit

REPAR'VIT® is used and listed by a large number of car manufacturers. Meets AFNOR NF n° X5021 and REACH standards. Discover our glazing repair kit, complete with all the tools and accessories you need to carry out quality repairs to your windscreen. Ideal for professionals.

Reference: ULTRAPOSE1-PSA

Brand: L'ULTRAPOSE

ULTRAPOSE1 - WINDSHIELD SETTING / LIFTING DEVICE FOR ON OPERATOR

Reference: 921

Brand: REPARBRISE

Windshield injection resin ( Conforms to AFNOR NF n°X50210 & UTAC regulation n°43)

Discover our 921 injection resin for repairing windshield impacts, a high-strength, long-lasting solution for restoring the transparency and strength of your car windows. Our REPARBRISE resins comply with the AFNOR NF n°X50210 standard; on 01/01/87 and 30/09/2008 we passed the UTAC TEST European regulation n°43. Our REPARBRISE resins comply with the...

Reference: 645

Brand: REPARBRISE

12V carbide drill for impact drilling

12V carbide drill supplied with integrated chuck lock, for drilling the impact point on your windshield before injecting the resin. Use with our 934, 4509w and 701 carbide drills. This drill can also be used with a felt for polishing the impact after repair. 4M cable extension

Reference: 943

Brand: REPARBRISE

943 windshield repair pit finish resin

High-strength pit finish resin specially developed for repairs to damaged glass surfaces. With 1 pipette you can repair more than 60 items. VERY IMPORTANT FOR YOUR SAFETY: Our REPARBRISE resins comply with the AFNOR NF n°X50210 standard; on 01/01/87 and 30/09/2008 we passed the UTAC TEST European regulation n°43. Our REPARBRISE resins comply with the...

Reference: 970

Brand: REPARBRISE

Rigid plastic / mylar squares for curing resin - Pack of 10

Our special rigid plastic squares, also known as mylar squares, are specially designed to polymerise the resin on the surface for impact repair. Lay the mylar sheet over the finishing resin and then use a UV lamp to polymerise the impact repair on the windshield. Bag of 10 squares.

Reference: 1700-PSA

Brand: REPARBRISE

REPAREGLASS® Senior 1700 Tool box

See a technical video: ICI

Reference: 1048

Brand: REPARBRISE

LED Light lamp ULTRA FAST CURING

From 05.04.2024, our 1048 UV lamps will be equipped with a USB-C socket, so they will be supplied with a reinforced USB-C cable ref. 1048-CABLEUSBC and a charger ref. 818-220V.

Reference: ULTRAPOSE1

Brand: L'ULTRAPOSE

ULTRAPOSE1 - WINDSHIELD SETTING / LIFTING DEVICE FOR ON OPERATOR

Reference: ULTRAPOSE-EVOLUTION

Brand: L'ULTRAPOSE

ULTRA-POSE EVOLUTION - NEW WINDSHIELD MOTORIZED FITTING/ LIFTING SYSTEM- SINGLE OPERATOR FOR CARS - SUV AND VANS

Technical movie: Vidéo

Reference: 768-PSA

Brand: REPARBRISE

Window-cleaner

Reference: 367

Brand: REPAR'VIT

Injection bridge 367 REPAR'VIT® special Windshield Repair

Our 367 REPAR'VIT® injection bridge is a support for injecting windshield repair resin. It is used with the standard 5095 injector or the 5096 high-impact injector by vacuum/pressure. You'll find our 367 deck in our 1330 or 1330SPECIAL windshield repair kits.

Reference: 438

Brand: REPARBRISE

Miniature windshield on display - Size 250x110 mm

Mini windshield on display 250 x 110 mm, we have intentionally created a space in the centre so that you can add your logo. This mini windshield allows the customer to see the result of the repair after an impact on the windshield. We recommend placing it at customer reception.

Reference: 672

Brand: REPARBRISE

Glass polish

Reference: 524

Brand: REPARBRISE

24V/12V voltage transformers for buses and trucks

24V/12V voltage transformers for buses and trucks

Reference: 561

Brand: REPARBRISE

Crack cleaner shampoo for cleaning old impacts and cracks

Our Crack Cleaner is a shampoo specially designed to clean old impacts and cracks before repairing your windshield. Falcon of 120ml

Reference: 701

Brand: REPARBRISE

Drill ball 701 for drilling large windshield impacts

Our 701 large ball drill is specially designed for windshield repairs, for drilling through very large impacts. Sold individually

Reference: 926

Brand: REPARBRISE

Roll of special plastic film for repairing cracks and fissures

Roll of soft plastic film for crack repair. Our flexible plastic film is specially designed for surface curing of crack repair resin. Lay the film over the crack resin and then use a UV lamp to polymerise the crack repair on the windshield. Warning: not compatible with finishing resin.

Reference: 931

Brand: REPARBRISE

Single 135 mm UV neon for 1046 and UVB-150 lamp

Single U.V. neon 135 mm - 931- for 1046 and UVB-150 lamp 

Reference: 934

Brand: REPARBRISE

Special carbide drill 934 for windshield impact repair

Discover our Carbide Drill Bits specially designed for fast, clean drilling of the point of impact in star or bubble impacts. To be used with our different drills: ref.10357, ref.646, ref.645.

Reference: 936

Brand: REPARBRISE

Dry-out bottle for cleaning old impacts

Our dry out cleaner is specially formulated for cleaning and drying impacts or cracks before repairing your windshield. Ideal for cleaning old impacts that are more than 3 weeks old for optimum repair. 120ml bottle

Reference: 945

Brand: REPARBRISE

Square mirror REPARBRISE (Plexiglass)

Reparbrise 945 Plexiglas square mirror for repairing windscreen impacts. This mirror allows you to view the impact throughout the repair process. Dimensions: 9.5cm x 9.5cm

Reference: 946

Brand: REPARBRISE

Large impact windshield pit adapter

Warning: sold without seal, seal reference in stock 983 Adapter for repairing large impacts, it adapts to our 3200 and 994 injectors to enable you to repair large impacts on the windshield. It can be used with our 1320, 951 and TERMINATOR 1 and 2 kits.

Reference: 949

Brand: REPARBRISE

Windshield impact polish bottle

Bottle of polish specially designed to polish the point of impact on your windshield, for a quality finish 60ml bottle

Reference: 958

Brand: REPARBRISE

Suction cup gel for adhesion to glazing

Our suction pad gel is specially designed to reinforce the adhesion of suction pads on windshields and car windows. 100ml jar

Reference: 959

Brand: REPARBRISE

Carbide-tip pen for windschield impact

Carbide-tipped pen, used to remove surface impurities on the impact before repairing it.

Reference: 961

Brand: REPARBRISE

Thermometer strip for windshield - 8 to 34°C

Thermometer strip To define the temperature of the windshield before operate. Scale 8°-34°C

Reference: 971

Brand: REPARBRISE

Round polishing felt, special impact finish

Round polishing felt to perfect the finish of surface impacts. Use our 971 felt with our 949 polish using our windshield polishers ref.10357, or 645. Sold individually

Reference: 977

Brand: REPARBRISE

Large format UV screen 30 x 20 cm - windshield impact protection

Large-format 30 x 20 cm UV screen to protect against ultra-violet light during repairs.

Reference: 979

Brand: REPARBRISE

Special windshield repair light pen

Our 979 pen light provides a better view of the impact injection during the repair of your windshield.

Reference: 983

Brand: REPARBRISE

Seals (X2) for large impact adapter 946

Seals (X2) for large impact adapter 946. It is important to change the seals regularly to ensure a good seal when injecting the Windshield Repair Resin.

Reference: 993

Brand: REPARBRISE

Pressure vacuum pump for REPAR'VIT Senior 1320 kit

Vacuum pump delivered with hose ref.996 (quick connector on injector side and direct connection on pump) The pressure vacuum pump is used to assist the repair of the impact on your windshield, by creating an air vacuum. This helps to remove air and impurities from the impact before injecting the resin. Alternating pressure vacuum/pressure with your pump...

Reference: 994

Brand: REPARBRISE

Injector for windshield repair resin for KIT-1320 - TERMINATOR 1 AND 2

Injector allowing you to inject windshield repair resin using a pressure vacuum pump. Used in KIT-1320 - TERMINATOR 1 AND 2, fits perfectly with our vertical or reversed windshield adaptor ref. ADAPT-PBV. It is suggested that you also order the injector to avoid leaks due to wear of the seal: - To replace the seal in contact with the windshield, use ref....

Reference: 995

Brand: REPARBRISE

Seal for Injector 994 - windshield impact repair

994 injector seal provides a uniform seal for injecting resin into the impact during Windshield repair. It is important to change the seals frequently. Available individually or in packs of 10.

Reference: 996

Brand: REPARBRISE

1M hydraulic connection hose for 993 pump

Connection hose with quick-fit connector (female on 1 side only) suitable only for 993 vacuum pump and 994 injector. Length: 1M

Reference: 1046

Brand: REPARBRISE

UV LAMP - 12V - Special Resin Curing

12V UV lamp with timer To connect this lamp to the 230V mains, simply adapt our mini transformer Ref.512. Please note: the maximum amperage of the replacement fuses is 2A. It is important to replace the UV neon (ref.931) at a frequency defined in accordance with standard NF R61-980, i.e: Continuous operation for 15 hours or approximately 90 repairs....

Reference: 1110

Brand: REPAR'VIT

Pressure vacuum pump for REPAR'VIT 1330 kit

The pressure vacuum pump 1110 is used to assist the repair of the impact on your windshield, by creating an air vacuum. This helps to remove air and impurities from the impact before injecting the resin. Alternating pressure vacuum/pressure with your pump will inject the resin uniformly into the impact.

Reference: 1412

Brand: REPARBRISE

Glass-primer 1412 for repairing missing glass on windshields

Our Glass-Primer 1412 is an adhesion primer for repairs to large areas of missing glass on the surface of your windshield. 120ml bottle

Reference: 2000

Brand: REPAR'VIT

REPAR'VIT® double-adjustable injection bridge for flat windshields

Our 2000 REPAR'VIT® injection bridge is a support for injecting windshield repair resin. Our bridge can be used to repair impacts on the flat windshields of buses and lorries, as it has double adjustment for better positioning of the injector. It can be used with the standard FIX-2006 injector and the high-impact FIX-2005 injector.

Reference: 3200

Brand: REPARBRISE

REPARBRISE Injector: Cylinder + piston for injection of windshield repair resin

REPAIR injector composed of a high quality cylinder + piston. Composed of 5 lips which allow an additional depression and a faster repair. Adapts to our injection bridges ref.51 and 9620. To avoid any leaks due to seal wear, we recommend that you also order the interchangeable end caps ref 3202 when purchasing the injector.

Reference: 3202

Brand: REPARBRISE

Exchangeable nozzles for REPARBRISE 3200 injector (pack of 5)

Exchangeable nozzles for REPARBRISE 3200 injector (pack of 5). When you repair a windshield impact, it's important that the injector has uniform sealing when the resin is injected. It is now essential to change the nozzle of the 3200 injector as soon as it becomes damaged.

Reference: 4509W

Brand: REPARBRISE

Half-ball point carbide for cracks and windshield impacts

Discover our half-ball point carbide specially designed for drilling cracks and impacts on your windshield. Made from high-quality materials, this drillbit guarantees optimum drilling precision and efficiency for highly accurate results. Sold individually

Reference: 4510NEW

Brand: REPARBRISE

220V long UV lamp for crack resin curing

Our 220V long UV lamp is a practical tool for curing crack resin to repair cracks in your windshield. (less than 5 minutes) It's highly portable, with sufficient power to ensure the resin cures quickly and effectively. Lightweight and ergonomic, it makes it easy to dry the 634 crack resin.

Reference: 5095

Brand: REPARBRISE

Standard injector 5095 for kit 1330 and 1330SPECIAL

Standard injector for kit ref.1330 and kit ref.1330SPECIAL. Supplied with seal, not compatible with our old 1310 kit.

Reference: 5096

Brand: REPARBRISE

Large impact packer 5096 for 1330 and 1330SPECIAL kits

Large impact injector for kit ref.1330 and kit ref.1330SPECIAL. Supplied with seal, not compatible with our old 1310 kit.

Reference: 9620

Brand: REPARBRISE

9620 REPARBRISE® aluminium injection bridge for windshield repairs

Our 9620 REPARBRISE® injection bridge is a support for injecting windshield repair resin. It can be used with a 3200 manual injector, but also with the 994 vacuum/pressure injector. You'll find our 9620 bridge in our 1320, TERMINATOR and TERMINATOR2 windshield repair kits.

Reference: 921N

Brand: REPARBRISE

Windshield injection resin without injector (AFNOR & UTAC regulation no. 43 compliant)

Windshield injection resin supplied without injector. Discover our 921 injection resin for repairing windshield impacts, a high-strength, long-lasting solution for restoring the transparency and strength of your car windows. Our REPARBRISE resins comply with the AFNOR NF n°X50210 standard; on 01/01/87 and 30/09/2008 we passed the UTAC TEST European...

Reference: FIX-2001

Brand: REPAR'VIT

REPAR'VIT® FIX-2001 injection bridge for windshield repair

Our REPAR'VIT® FIX-2001 injection bridge is a support for injecting windshield repair resin. It is used with our FIX-2044 injector + FIX-5035 screw, which are included in the bridge, and our vacuum/pressure pump ref.PMP-ADVANTAGE (not included). You'll find our FIX-2001 bridge in our 1300 windshield repair kit.

Reference: FIX-2005

Brand: REPAR'VIT

Large impact resin filler injector for REF -2000 bridge

Large impact resin filler injector for REF-2000 Ø 1.5 cm bridge.

Reference: FIX-2006

Brand: REPAR'VIT

Standard resin filler injector for REF -2000 bridge

Standard resin filling chamber for REF-2000 bridge Ø 0,9 cm

Reference: FIX-2025

Brand: REPAR'VIT

Replacement plunger piston for injection bridge and suction cup

Replacement piston for our bridges REF-2000, REF-367, REF-9620, and our suction cup REF-GEZ-543-1.

Reference: FIX-2044

Brand: REPAR'VIT

Metal resin injector for FIX-2001 injection bridge

Metal injector for windshield repair resin injection for FIX -2001 injection bridge

Reference: FIX-5063-DESTOCK

Brand: REPAR'VIT

Aluminium screw for injection bridge 367

Aluminium screw for injection bridge 367, holds injectors 5095 and 5096 to the windshield to ensure a seal during resin injection.

Reference: GAB-VBSA

Brand: REPARBRISE

Field of vision model to define windshield repair areas

REPAIR ZONE : Zone 2 : In this zone, repair is not authorised. Zone 1 : Where possible, repairs are authorised.. Using our field of vision template, you can easily determine the zones where repairs are possible or impossible. Refer to the AFNOR NF R19-601-1 standard, which sets out the different types of repair and the support processes required to...

Reference: APB-TS3500

Brand: L'ULTRAPOSE

This option allows to place the windshield in horizontal side

Reference: PMP-ADVANTAGE

Brand: REPAR'VIT

Pressure vacuum pump for REPAR'VIT kit 1330SPECIAL and 1300

The pressure vacuum pump is used to assist the repair of the impact on your windshield, by creating an air vacuum. This helps to remove air and impurities from the impact before injecting the resin. Alternating pressure vacuum/pressure with your pump will inject the resin uniformly into the impact.

Reference: BUT-TS-RALLONGE

Brand: L'ULTRAPOSE

Pair of stabilizers blockers for TS-RALLONGE

Reference: 1414-V2

Brand: REPARBRISE

Old windshield impact cleaning kit

Reference: 1300

Brand: REPAR'VIT

1300 REPAR'VIT JUNIOR windshield repair kit

REPAR'VIT® is used for various types of impact repairs: Bubble impacts Impacts with star-shaped bubbles Spangled impacts cracks Discover our glass repair case, complete with all the tools and accessories you need to carry out quality repairs to your windscreen. Ideal for professionals.

Reference: 1330

Brand: REPAR'VIT

REPAR'VIT® WINDSHIELD REPAIR Tool box with a pressure/vaccum pump

REPAR'VIT® is used for various types of impact repairs: Bubble impacts Impacts with star-shaped bubbles Spangled impacts cracks Discover our glass repair case, complete with all the tools and accessories you need to carry out quality repairs to your windscreen. Ideal for professionals.

Reference: 951

Brand: REPARBRISE

REPARBRISE® SENIOR WINDSHIELD REPAIR Tool box

REPARBRISE® is used and approved by a large number of car manufacturers. Discover our glazing repair kit, complete with all the tools and accessories you need to carry out quality repairs to your windscreen. Ideal for professionals.

Reference: 1320LED

Brand: REPAR'VIT

Repar'vit® New Generation 1320 case with LED for windshield impact repair

REPAR'VIT® is used and listed by a large number of car manufacturers. Meets AFNOR NF n° X5021 and REACH standards. Discover our glazing repair kit, complete with all the tools and accessories you need to carry out quality repairs to your windscreen. Ideal for professionals.

Reference: 769

Brand: REPARBRISE

Window / windshield cleaner 5L - Mosquito repellent -769

Eliminates traces of oil, insects and dust. Used in industry, cars and construction. For cleaning windshields, windows and outside mirrors. Sold in 5L drums Also available - 750ml aerosol - Ref.768 and 20L drum - Ref.770

Reference: 768

Brand: REPARBRISE

Foam window / windshield cleaner 768 - Mosquito repellent

Eliminates traces of oil, insects and dust. Used in industry, cars and construction. For cleaning windshields, windows and outside mirrors. Sold in 750 ml aerosols or in box of 12. Also available - 5L drum - Ref.769 and 20L drum- Ref.770

Reference: 770

Brand: REPARBRISE

Window / windshield cleaner 20L - Mosquito repellent -770

Eliminates traces of oil, insects and dust. Used in industry, cars and construction. For cleaning windshields, windows and outside mirrors. Sold in 20L drums Also available - 750ml aerosol - Ref.768 and 5L drum - Ref.769

Reference: TSA-ADAPT

Brand: L'ULTRAPOSE

Articulated arm for ULTRAPOSE BUS

Please note that the TSAD-ADAPT should not be used at the same time as the TSAD-VIS You can therefore adapt the TS-ADAPT with the TS-RALLONGE in order to dismantle the assembly easily.

Reference: TS-KITMOTORISE

Brand: L'ULTRAPOSE

Motorized kit with remote control

Reference: TS-RALLONGE

Brand: L'ULTRAPOSE

Extension arm

For easier removal of the TS-RALLONGE, we recommend our TS-ADAPT, which has a quick-release pin.

Reference: TSAD-VIS

Brand: L'ULTRAPOSE

Adaptor arm for TS3500

Please note that the TSAD-VIS should not be used at the same time as the TSAD-ADAPT

Reference: VALISE+MOUSSE

Brand: L'ULTRAPOSE

Case only with foam for ULTRAPOSE 1 and 3

Case only with foam for ULTRAPOSE 1 and 3  Case sold without accessories. Dim. 840 x 390 x 150 cm

Reference: EVOL-SUPTEL

Brand: L'ULTRAPOSE

Remote control holder on suction cup for Ultrapose Evolution