Square piano wire with a square-section of 0.6 mm - 44 ML - 2nd LIFE - N88 at VBSA

Home

VBSA awarded ECOVADIS label
Banner

Product Details

Product Details

Reference VKD-44-N88

Data sheet

Packaging: Unité

Microfiber for glass and polishing 40 x 40 cm

The microfiber for windows and polishing 40 x 40 cm is the ideal tool for high-precision cleaning applications. With its composition of 70% polyester and 30% polyamide, this high-tech microfiber offers exceptional performance for cleaning car windows and polishing automotive surfaces. It is an effective replacement for traditional chamois leathers and...

Special scraper blades for windshield repairs |VBSA | France

Reference: 948

Special windshield repair scraper blades - Pack of 5

These scraping blades are specially designed to remove excess finishing resin after a windscreen repair. 1. Precise, scratch-free scraping Impeccable finish: These scraping blades are specially designed to effectively remove excess finishing resin after a windscreen repair. They enable precise scraping without damaging or scratching the repaired surface,...

Reference: ZDK-500

Knife with quick blade exchange device

The knife with quick blade change is the ideal tool for professionals who want to save time and work efficiently. Thanks to its quick change system, simply press the button at the base of the knife, remove the worn blade, and insert a new blade while maintaining pressure. Simple, fast, and safe. Compatible with all blades for cold cutting knives, it...

Lame Pour La Coupe À Froid 19 Mm Dépose pare-brise France

Reference: Z1

Cold knife blade 19 mm

Cold knife blade- Sold individually- Cutting length: 19 mm- 18gCARTON OF 10

Lame Pour La Coupe À Froid 25 Mm Dépose pare-brise France

Reference: Z2

Cold knife blade 25 mm

Cold knife blade, extra fine- Sold individually- Cutting length: 25 mm- 18gCARTON OF 10

Lame Pour La Coupe À Froid 38 Mm Dépose pare-brise Europe

Reference: Z3

Cold knife blade 38 mm

Cold knife blade, extra fine- Sold individually- Cutting length: 38 mm- 20 gCARTON OF 10

Reference: Z1022

Cold knife blade

This special blade reaches the urethane between the wheel cover and the side of the windshield.Its unique shape allows you to unbond the windshield with a cold knife, without having removed the wheel cover (also bond) before. Once the windshield is removed, you can unbond the wheel cover, wihtout risking to damage the remaining material.- Sold...

Paire De Poignees De Tirage En Tire-Bouchons Dépose pare-brise France

Reference: PAIG-200

Wire gripping handles (corkscrew shape)

Wire gripping handlesIdeal solution to work rapidly and without problem. Feed the wire through the hole in the wedge shaft (fig A), loop it through the hole at the top of the shaft (fig B) and then bring it back into the large plastic handle. By pressing the wedge back into the handle, the wire is held in place (fig C). To shorten the wire, press down on...

Reference: AIG-300

Wire guide

The wire guide's long, narrow shaft allows positioning the wire so it prevents the dash and interior mouldings from being damaged. Recommended above all for cars with a high windshield slope or with a bottom window bond that is hardly accessible. Of course, the wire guide can also be used from the outside.- 350 x 38 x 38 mm - 220 g

Reference: CROR-S

Brand: REPAREGLASS

Ball-tipped hook, with short shaft

Ball-tipped hook, with short shaft- 210 x 35 x 35 mm - 122 g

Reference: CROR-L

Brand: REPAREGLASS

Ball-tipped hook, with long shaft

Ball-tipped hook, with long shaft- 280 x 35 x 35 mm- 160 g

Reference: CGE-148

Clip removal tool

Clip removal tool This tool is used to remove plastic clips on door linings. It fits easily down into the recessed area and then can slid under the head of the cowling clip. You then pull up on the center locking part and the clip can be removed. - 235 x 35 x 30 mm - 165 g

Reference: SGR-380

Glass scraper, with 1 RK-100A blade

Glass scraper with 1 RK-100A bladeMainly used to rapidly and entirely remove bond residues on windows that will be reinstalled. Also used to remove stickers. Simply replace the old blade by a new one, no sharpening needed.

Cutter Olfa Dépose pare-brise France pas cher

Reference: L2

Olfa® knife

Olfa®knife This knife is made of high impact plastic, has a stainless steel blade housing and a positive locking thumb wheel so that you can set the blade at any length. The back of the knife features a rubber grip that lets the knife rest comfortably in your hand and keeps it from slipping. The famous model. - 146 x 40 x 20 mm - 110 g

Couteau Long Olfa Avec Une Lame À Casser Dépose pare-brise France

Reference: XL2

Long Olfa® knife with a snap-off blade

Olfa® knife Snap-off blades have known a growing success in our filed, especially during these recent years. With this knife, you can cut the urethane that is far below the dashe of most vehicles. This knife is an extra-long version of the OLF20, it is particularly suitable for car glaziers.- 280 x 40 x 20 mm- 125 g

Reference: MS-180

Installation stick

Reference: ZAW-010

Wiper puller for bolted-on wipers

Wiper puller for bolted-on wipersBecause windshield wipers have become larger, wiper arms are pressure-fitted to the posts so they will not slip. They are then secured with a nut to hold the arm in place so they will not lift. Until now, it was almost impossible to remove these wiper arms without breaking or damaging them or scratching the cowl. You no...

Reference: SB-880

Impact-resistant safety goggles

When working with glass, wearing protective eyewear is essential to ensure eye safety against shards and debris. Our shatterproof glasses offer side and front protection thanks to their ergonomic design. They can be worn over most prescription glasses, ensuring optimal comfort for all users. Features: - Complete protection: Protects the eyes against...

Reference: OUV-CART

Urethane tube opener

Pierre À Aiguiser Avec Poignee Protection France

Reference: SSU-190

Universal sharpening stone with handle

Reference: PSL-150-1

Suction cup deluxe sold individualy (Ø 150 mm)

Suction cup deluxe sold individualy (Ø 150 mm)Easier and safer to attach that common suction lifters with clamp lever technology.The bell shaped rubber pads already adhere onto the glass surface with slight pressing even before pressing the lever.Possibility to pass a belt through. Load capacity for each lifter is 80 kg.

Butyl 460 sealant for all types of glass with or without seals from VBSA - France

Reference: 460

Butyl 460 sealant for all glass with or without seals

A polyvalent product, it can be used to waterproof both spot-welded and demountable elements (e.g. sliding roofs). Butyl mastic sealing used for camper van roof window. The product is permanently elastic and resistant to UV rays. High solids content. Colour: black Packaging : Sold individually in 310 ml cartridges or in box of 12.

Paire De Ventouses Pour Vitres Laterales Pose pare-brise France

Reference: VSP-290

Window holders (forside windows)

Window holders (forside windows)Hold up the door glass while you work. Simply loop the cable over the door frame and attach the suction cups to each side of the glass.- 177 x 200 x 76 mm - 70 g

Corde A Piano Carree En Bobine Dépose pare-brise France qualité

Reference: VKD-22A

Brand: REPAREGLASS

Squared cutting wire - Size 0.6mm - 22ML

Squared cutting wire REPAREGLASS Surprising, but true! The cutting force of square wire is far superior to that of common round wire. Try it out for yourself, you'll be amazed! REF-VKD-22 Square wire. 0.6 x 0.6 mm, length: 22 m, wound on plastic spool. 691 NEWTON

Corde A Piano Torsadee En Bobine Dépose pare-brise France pas cher

Reference: SD-22

Braided wire in a spool - - ø 0,80 mm - 22ML

Braided wire in a spool REPAREGLASS ø 0.80 mm, length: 22 m, Wound on a plastic spool. 1083 NEWTON The wire to be cut is twisted according to our exact specifications from three strong stainless steel wires. The wire is anodised in a typical "gold" colour.

Aiguille D'Amorce Dépose pare-brise France

Reference: AIG-125

T-handles wire threader

Just lay the wire in the notched tip and pass it through the polyurethane by pushing the tool from the inside to the outside.In the way, you can release the window. Always place the flat surface of the wire threader on the window, so that the hollow tube is not deformed.- 120 x 26 x 10 mm - 20 g

Levier Pour Enjoliveurs Dépose pare-brise France

Reference: LH-683

Christmas tree moulding remover

Reference: GKEV

Cut-resistant knitted gloves

Our knitted gloves provide effective protection against cuts, ideal for handling glass surfaces and sharp objects. Thanks to their robust design, they combine strength, comfort and optimal grip. Features: Knitted material: Excellent resistance to cuts and wear and tear Latex-coated palms: Enhanced grip for a secure hold Flexible and comfortable: Allow...

Pastilles Capteurs De Pluie Kpl -197:Pour Bm Classe E

Reference: KPL-197

Adhesives pads for rainsensors KPL -197:For BM Classe E,Mercedes

Package of 5 pieces

Pastilles Capteurs De Pluie Kpl -193: Pour Bmw À Partir De Septembre 2003 France

Reference: KPL-193

Adhesives pads for rainsensors KPL-193: For BMW from september 2003

Package of 5 pieces

Pastilles Capteurs De Pluie Kpr -196:Pour Chrysler

Reference: KPR-196

Adhesives pads for rainsensors KPR -196: For Chrysler, Deawoo,Kia,Honda,Hyundai, Nissan

Package of 5 pieces Dimensions :60 x 35 x 1,0 mm CHRYSLER GRAND CHEROKEE 2002DAEWOO LACETTI 2004DAEWOO NUBIRA 2003DAEWOO TACUMA/REZZO 2005HONDA ACCORD 2003-2008HONDA FR-V 2004HONDA LEGEND 2006KIA OPIRUS 2003NISSAN PRIMERA 2002

Pastilles Capteurs De Pluie Kpl -192: Pour Renault Megane

Reference: KPL-192

Adhesives pads for rainsensor KPL-192: For Renault Mégane,Nissan Micra

Package of 5 pieces

Pastilles Capteurs De Pluie Kpr -194: Pour Groupe Volkswagen Depuis 1998 Epaisseur 1Mm France

Reference: KPR-194

Adhesives pads for rainsensors KPR -194: For Volkswagen group (thickness 1mm)

Package of 5 pièces

Pastilles Capteurs De Pluie Kpr -195: Pour Groupe Volkswagen Epaisseur 15Mm France

Reference: KPR-195

Adhesives pads for rainsensors KPR -195: For Volkswagen group (thickness 1.5mm)

Package of 5 pieces

Pastilles Capteurs De Pluie Kpr -191: Pour Db Classe A

Reference: KPR-191

Adhesives pads for rainsensors KPR -191: For DB classe A,Peugeot,Cïtroen

Package of 5 pieces

Reference: KPL-190

Adhesives pads for rainsensors KPL -190: For Audi: A4,A6,A8,Q7,Opel Zafira et Corsa

Package of 5 pieces

Reference: REG-CAPLUIE

Rain / light sensor repair gel

Activateur Pour Faciliter L'Application Et L'Adherence Des Pastilles Capteurs de pluie et lumière France

Reference: ACT-KPR

ACTIVATOR FOR APPLICATION OF SENSOR PADS

Seringue De Regenerateur D'Adhesifs Pour Capteur De Pluie Capteurs de pluie et lumière France pas cher

Reference: REG-CAPLUIE2

RAIN/LIGHT CURVED SENSOR REPAIR GEL

Reference: BUSE-REG

mixing nozzles

Moulage Pour Capteur De Pluie Et Lumiere 57Mm X 40Mm France

Reference: MOUL-REG

RAIN SENSOR REPAIR MOULDS (SILICONES) 57mm x 40mm

Reference: MR5

Measure tape

Reference: 7002140

Diagonal cutting plier 150 mm

Pastille Capteur De Pluie Reef Kpl-192C Pour Bmw

Reference: KPL-192C

Repair adhesive pads photosensor KPL-192C for BMW, RENAULT

Package of 5 pieces

Pastille Capteur De Pluie Reef Kpl-154 Pour Toyota France qualité

Reference: KPL-154

Repair adhesive pads photosensor RÉF. KPL-154 for TOYOTA

Package of 5 pieces

Pastille Capteur De Pluie Reef Kpl-166 Pour Seat

Reference: KPL-166

Repair adhesive pads photosensor- Dimensions : Ø32 x 1.5 mm -for SEAT, VW

Package of 5 pieces

Pastille Capteur De Pluie Reef Kpl-189B Pour Chrysler

Reference: KPL-189B

Repair adhesive pads photosensor RÉF. KPL-189B for CHRYSLER, JEEP

Package of 5 pieces

Reference: 730362

Universal plier 250 mm

Reference: 702611200

Chain nose plier with cutter 200 mm

Reference: FSC-300SPECIAL

Brand: REPAREGLASS

Special scraper

REF. FSC-300SPECIALSCRAPER (without blade)To scrape the old urethane bead. This scraper is universal due to thefact it can accept different blades width ( 13 mm – 16 mm – 20 mm)and angular blades

Servante spécifique d'atelier vitrage nue

Reference: SERV-OPB-PRO-NUE

Empty cart trolley without glass rack ans without foam inside the drawers

30 other products in the same category:

Reference: DESTOCK-1912-ULTRAPOSE-EVO

Brand: L'ULTRAPOSE

ULTRA-POSE EVOLUTION- 1912 - New windshield motorized fitting/fifting system - single operator for cars SUV & VANS - Destocking

General condition: RAS ULTRAPOSE-EVOLUTION almost new, a few visible micro scratches - 1 Only one available 2nd LIFE warranty: 6 months This product has received significant recognition, having won the Bodywork of the Year 2017 award, which is a testament to its quality and innovation in the field. This system has several features and advantages that...

Reference: PSL-150-1-N71

Reinforced suction cup for windshield - 2nd LIFE - sold individually - N71

Suction cup in average condition - Please note, sold individually Cosmetic defects shown in the photos are present - Only one item available 2nd LIFE warranty: 6 months Reinforced suction cup for windshields, sold individually Load capacity: 80 kg. High-quality handle, optimal grip on curved glass. • Sold individually • Load capacity: 80 kg. • Ø 150 mm...

Tool for removing windscreen wipers 2nd LIFE - N108 Windshied removal - VBSA - France

Reference: ZAW-010-N108

Wiper puller for bolted-on wipers - Second Life - N108

Tool in very good condition. Only a few cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Tool for removing windscreen wipers. For front windscreen wipers that are mounted with screws and nuts. As the wiper blades on modern vehicles are longer, the wiper arms are fixed more securely in order to...

2nde Vie New generation UV lamp -12V- Special resin polymerisation - N183 at VBSA - France

Reference: 1046-N183

Brand: REPARBRISE

2nde Vie - New generation UV lamp -12V- Special resin polymerisation - N183

12V UV lamp with timer. To connect this lamp to a 230V mains supply, you just need to adapt our mini transformer Ref.512. General functioning: RAS Only aesthetic defects shown in the photos appear - 1 single item available SECOND LIFE guarantee: 6 months Caution: the maximum amperage of the replacement fuses is 2A. It is important to replace the UV neon...

Ball-tipped hook, with long shaft - Second LIFE - N146 at VBSA - France

Reference: CROR-L-N146

Brand: REPAREGLASS

Ball-tipped hook, with long shaft - Second LIFE - N146

In good condition Only a few minor cosmetic defects appear - 1 Only one item available 2nd LIFE guarantee: 6 months Ball-tipped hook, with long shaft- 280 x 35 x 35 mm- 160 g

Pressure vacuum pump for REPAR'VIT Senior 1320 kit - -2nd LIFE - N31 at VBSA - France

Reference: 993-N31

Brand: REPARBRISE

Pressure vacuum pump for REPAR'VIT Senior 1320 kit - -2nd LIFE - N31

Pump in very good condition. Only a few cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Vacuum pump delivered with hose ref.996 (quick connector on injector side and direct connection on pump) The pressure vacuum pump is used to assist the repair of the impact on your windshield, by creating an air...

Mirror Reparbrise Plexiglas Windshield impact repair - Second Life - N86 at VBSA - France

Reference: 945-N86

Brand: REPARBRISE

Square mirror REPARBRISE (Plexiglass) - Second Life - N86

Vacuum cleaner in good condition. Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Reparbrise 945 Plexiglas square mirror for repairing windscreen impacts. This mirror allows you to view the impact throughout the repair process. Dimensions: 9.5cm x 9.5cm

9620 REPARBRISE® aluminium injection bridge for PB repair - 2nd LIFE - N87 Windscreen repair | VBSA | France

Reference: 9620-N87

Brand: REPARBRISE

9620 REPARBRISE® aluminum injection bridge for PB repair - Seconde LIFE -N87

In good condition Only a few minor cosmetic defects appear - 1 Only one item available 2nd LIFE guarantee: 6 months The 9620 REPARBRISE® injection bridge is a sturdy aluminum support designed to ensure precise resin injection during windshield repairs. It is compatible with the 3200 manual injector and the 994 vacuum/pressure injector, offering great...

Mirror Reparbrise Plexiglas Windshield impact repair - Second Life - N83 at VBSA - France

Reference: 945-N83

Brand: REPARBRISE

Square mirror REPARBRISE (Plexiglass) - Second Life - N83

Square piano wire with a square-section of 0.6 mm - 44 ML - 2nd LIFE - N89 at VBSA - France

Reference: VKD-44-N89

Brand: REPAREGLASS

Square piano wire with a square-section of 0.6 mm - 44 ML - 2nd LIFE - N89

Functional rope, only cosmetic defects - 1 item available 2nd LIFE guarantee: 6 months REPAREGLASS square piano wire on a spool Surprising, but true! The cutting strength of square wire is much greater than that of standard round wire. Try it for yourself and test the square wire, you'll be surprised! Square wire. 0.6 x 0.6 mm, length: 44 m, wound on a...

Reference: DEV-BOB-CHAM-N271

Dispenser for BOB-CHAM or BOB-FIBRE cleaning paper - Seconde Life - N271

In very good condition Only a few minor cosmetic flaws - 1 Only one item available 2nd LIFE warranty: 6 months Make it easier to use your wiper rolls with this sturdy and practical dispenser, designed to hold BOB-CHAM and BOB-FIBRE rolls. Ideal for workshop use, it ensures a smooth and controlled distribution of hand towels while guaranteeing quick and...

Reference: PSH-120-1-N138

Single suction cup N138 - 2ème VIE - Load capacity: 80 kg

Suction cup in good condition - Please note: sold individually Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months The suction cup allows you to lift a window pane that is ready to be installed safely (2 are required). The edge of the window pane must not be touched after it has been prepared for...

LED Light lamp ULTRA FAST CURING - Second Life - N178 at VBSA - France

Reference: 1048-N178

Brand: REPARBRISE

LED Light lamp ULTRA FAST CURING - Second Life - N178

General operation: RAS Very good condition - 1 Only one available Second Life warranty: 6 months Our new polymerisation lamp will save you a lot of time.... A whole lot of time! The resin will polymerise in just 50 seconds! Normally, with a traditional UV lamp, it takes 10 to 15 minutes to cure! But that's all over now! Thanks to our new REF-1048 LED UV...

Reference: KIT-AZOTE-MAXI-N4

Complete PLASTIC AZOTE WELDING KIT - SECOND CHOICE n°4

ATTENTION 1 device available With integrated generator No operating faults. Minor cosmetic defects in the form of scratches and lack of paintwork.

Mirror Reparbrise Plexiglas Windshield impact repair - Second Life - N82 at VBSA - France

Reference: 945-N82

Brand: REPARBRISE

Square mirror REPARBRISE (Plexiglass) - Second Life - N82

Reference: PSH-120-1-N27

Single suction cup N27 - 2ème VIE - Load capacity: 80 kg

2nde Vie - Old generation UV lamp -12V- Special resin polymerisation - N78 at VBSA - France

Reference: 1046-N78

Brand: REPARBRISE

2nde Vie - Old generation UV lamp -12V- Special resin polymerisation - N78

12V UV lamp with timer. To connect this lamp to a 230V mains supply, you just need to adapt our mini transformer Ref.512. General functioning: N/A This lamp has numerous scratches and signs of wear, as shown in the photos - 1 single item available SECOND LIFE guarantee: 6 months Caution: the maximum amperage of the replacement fuses is 2A. It is important...

Reference: CGE-148-N145

Clip removal tool This tool is used to remove plastic clips on door linings - Second Life - N145

In good condition Only a few minor cosmetic defects appear - 1 Only one item available 2nd LIFE guarantee: 6 months Clip removal tool This tool is used to remove plastic clips on door linings. It fits easily down into the recessed area and then can slid under the head of the cowling clip. You then pull up on the center locking part and the clip can be...

Reference: PSH-120-1-N68

Single suction cup N68 - 2ème VIE - Load capacity: 80 kg

Suction cup in very good condition - Please note: sold individually Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months The suction cup allows you to lift a window pane that is ready to be installed safely (2 are required). The edge of the window pane must not be touched after it has been prepared...

Reference: PSL-150-1-N72

Reinforced suction cup for windshield - 2nd LIFE - sold individually - N72

Pack of 55 windshield clips and staples - 2nd LIFE - N47 at VBSA - France

Reference: CLIPS-AGRAFES-55PCS-N47

Set of 55 windshield clips and staples - 2nd LIFE - N47

Sets of 55 various windshield clips and staples

Reference: LAMPE-DSP-N258

Neon dent repair lamp - 2nd LIFE - N258

General operation: RAS Lamp rarely used during sales demonstrations, a few micro scratches visible - 1 Only one item available 2nd LIFE warranty: 6 months The neon lamp for dent removal is the perfect tool for visualizing deformations of the bodywork and carrying out precise and efficient repairs. Thanks to its powerful and uniform lighting, it allows...

Reference: PSH-120-1-N24

Single suction cup N24 - 2ème VIE - Load capacity: 80 kg

Reference: NSE-826-N216

2ND CHOICE - Foldable windshield rack - 9 compartments (without wheels) - N216

Telescopic windscreen rack with 9 compartments - Supplied without castors General functioning: OK Only aesthetic defects shown in the photos appear on this rack - 1 single item available SECOND LIFE guarantee: 6 months H: 800 mm x W: 845 mm x H: 635 mm Maximum height: 970 mm Weight: 32.80 kg Load capacity: 200 kg These windshield racks allow for the...

2nde Vie - New generation UV lamp -12V- Special resin polymerisation - N184 at VBSA - France | Windshield Repair

Reference: 1046-N184

Brand: REPARBRISE

2nde Vie - New generation UV lamp -12V- Special resin polymerisation - N184

2nde Vie - Old generation UV lamp -12V- Special resin polymerisation - N182 at VBSA - France

Reference: 1046-N182

Brand: REPARBRISE

2nde Vie - New generation UV lamp -12V- Special resin polymerisation - N182

Single suction cup N670 - 2ème VIE - Load capacity: 80 kg at VBSA - France

Reference: PSH-120-1-N70

Single suction cup N70 - 2ème VIE - Load capacity: 80 kg

Reference: DESTOCK-CLEAN-SET

Interior car protection set - 2nd choice

CAUTION: Some sets may have fragile gear lever and handbrake protectors (tear) This car interior protection set is designed to keep the vehicle safe and clean during any work. It provides the necessary protection before working on a customer's vehicle, effectively protecting the sensitive parts of the interior. This set is ideal for automotive...

2nde Vie - New generation UV lamp -12V- Special resin polymerisation - N235 at VBSA - France

Reference: 1046-N235

Brand: REPARBRISE

2nde Vie - New generation UV lamp -12V- Special resin polymerisation - N235

Reference: PSL-150-1-N30

Reinforced suction cup for windshield - 2nd LIFE - sold individually - N30

Suction cup in very good condition - Please note: sold individually Only cosmetic defects shown in the photos are present - 1 Only one item available 2nd LIFE warranty: 6 months Reinforced suction cup for windshields, sold individually Load capacity: 80 kg. High-quality handle, optimal grip on curved glass. • Sold individually • Load capacity: 80 kg. • Ø...

		Riveting Plier K39 €0.00
		Rubber hammer €0.00
	The microfiber for windows and polishing 40 x 40 cm is the ideal tool for high-precision cleaning applications. With its composition of 70% polyester and 30% polyamide, this high-tech microfiber offers exceptional performance for cleaning car windows and polishing automotive surfaces. It is an effective replacement for traditional chamois leathers and polishing cloths, and is virtually indestructible. Characteristics: High-performance cleaning: Perfect for cleaning car windows, this microfiber allows streak-free cleaning and impeccable polishing, ideal for removing polish and glaze without leaving any residue. Durability: Thanks to its composition of 70% polyester and 30% polyamide, this microfiber is designed to withstand intensive use while retaining its cleaning properties. Easy care: This microfiber is easily machine-washable, without softener, for prolonged use without loss of quality. Replacement for traditional tools: It is an effective replacement for chamois leathers and polishing cloths, offering a more practical and more durable alternative. Dimensions: 40 x 40 cm: Ideal size for a comfortable grip and precise cleaning.	Microfiber for glass and polishing 40 x 40 cm €0.00
	These scraping blades are specially designed to remove excess finishing resin after a windscreen repair. 1. Precise, scratch-free scraping Impeccable finish: These scraping blades are specially designed to effectively remove excess finishing resin after a windscreen repair. They enable precise scraping without damaging or scratching the repaired surface, guaranteeing a clean and professional finish. Smooth and clean surface: Thanks to their careful design, these blades provide a perfectly smooth surface after repair, which is essential for optimal visibility and increased safety. 2. Versatility of use Suitable for different materials: These blades are not limited to windscreen repairs. They are also ideal for restoration work on plastic, vinyl, leather and other materials, facilitating the removal of excess repair products and ensuring versatile use. Multi-purpose: Whether you need to repair a windscreen, restore plastic or vinyl surfaces, or remove residue from leather, these blades are an essential multifunctional tool for your toolbox. 3. Ease of use Easy to use: Their practical size makes them easy to handle, offering total control when scraping, whether for professional use in the workshop or domestic use. Perfect for precise work without additional effort. Designed for all users: These blades are designed to offer a smooth and pleasant user experience at all levels of experience. 4. Durability and longevity Set of 5 blades: The bag contains 5 scraping blades, offering an economical and durable solution. This means you can use them on several repairs, reducing the need for frequent replacement. Extended use: These blades are built to last, guaranteeing extended and efficient use in all your scraping tasks. 5. Economical and efficient solution Convenient and cost-effective pack: The 5-blade format allows you to maximise your investment while having the tools needed for several repairs. You thus benefit from a high-quality solution at an affordable price.	Special windshield repair scraper blades - Pack of 5 €0.00
	The knife with quick blade change is the ideal tool for professionals who want to save time and work efficiently. Thanks to its quick change system, simply press the button at the base of the knife, remove the worn blade, and insert a new blade while maintaining pressure. Simple, fast, and safe. Compatible with all blades for cold cutting knives, it offers great flexibility of use. Sold with 1 blade REF.Z2	Knife with quick blade exchange device €0.00
	Cold knife blade - Sold individually - Cutting length: 19 mm - 18g CARTON OF 10	Cold knife blade 19 mm €0.00
	Cold knife blade, extra fine - Sold individually - Cutting length: 25 mm - 18g CARTON OF 10	Cold knife blade 25 mm €0.00
	Cold knife blade, extra fine - Sold individually - Cutting length: 38 mm - 20 g CARTON OF 10	Cold knife blade 38 mm €0.00
	This special blade reaches the urethane between the wheel cover and the side of the windshield. Its unique shape allows you to unbond the windshield with a cold knife, without having removed the wheel cover (also bond) before. Once the windshield is removed, you can unbond the wheel cover, wihtout risking to damage the remaining material. - Sold individually - 129 x 59 x 20 mm - 20 g CARTON OF 5	Cold knife blade €0.00
	Wire gripping handles Ideal solution to work rapidly and without problem. Feed the wire through the hole in the wedge shaft (fig A), loop it through the hole at the top of the shaft (fig B) and then bring it back into the large plastic handle. By pressing the wedge back into the handle, the wire is held in place (fig C). To shorten the wire, press down on the front part of the shaft, releasing it from the handle, and adjust your wire (fig D).	Wire gripping handles (corkscrew shape) €0.00
	The wire guide's long, narrow shaft allows positioning the wire so it prevents the dash and interior mouldings from being damaged. Recommended above all for cars with a high windshield slope or with a bottom window bond that is hardly accessible. Of course, the wire guide can also be used from the outside. - 350 x 38 x 38 mm - 220 g	Wire guide €0.00
	Ball-tipped hook, with short shaft - 210 x 35 x 35 mm - 122 g	Ball-tipped hook, with short shaft €0.00
	Ball-tipped hook, with long shaft - 280 x 35 x 35 mm - 160 g	Ball-tipped hook, with long shaft €0.00
	Clip removal tool This tool is used to remove plastic clips on door linings. It fits easily down into the recessed area and then can slid under the head of the cowling clip. You then pull up on the center locking part and the clip can be removed. - 235 x 35 x 30 mm - 165 g	Clip removal tool €0.00
	Glass scraper with 1 RK-100A blade Mainly used to rapidly and entirely remove bond residues on windows that will be reinstalled. Also used to remove stickers. Simply replace the old blade by a new one, no sharpening needed.	Glass scraper, with 1 RK-100A blade €0.00
	Olfa®knife This knife is made of high impact plastic, has a stainless steel blade housing and a positive locking thumb wheel so that you can set the blade at any length. The back of the knife features a rubber grip that lets the knife rest comfortably in your hand and keeps it from slipping. The famous model. - 146 x 40 x 20 mm - 110 g	Olfa® knife €0.00
	Olfa® knife Snap-off blades have known a growing success in our filed, especially during these recent years. With this knife, you can cut the urethane that is far below the dashe of most vehicles. This knife is an extra-long version of the OLF20, it is particularly suitable for car glaziers. - 280 x 40 x 20 mm - 125 g	Long Olfa® knife with a snap-off blade €0.00
		Installation stick €0.00
	Wiper puller for bolted-on wipers Because windshield wipers have become larger, wiper arms are pressure-fitted to the posts so they will not slip. They are then secured with a nut to hold the arm in place so they will not lift. Until now, it was almost impossible to remove these wiper arms without breaking or damaging them or scratching the cowl. You no longer have this problem with this tool designed for windshield removal. Simply remove the wiper nut, slide the tool over the arm until the jaws touch the wiper post, then turn the T-handle clockwise until the wiper arm pops from the wiper post. - 90 x 82 x 35 mm - 270 g	Wiper puller for bolted-on wipers €0.00
	When working with glass, wearing protective eyewear is essential to ensure eye safety against shards and debris. Our shatterproof glasses offer side and front protection thanks to their ergonomic design. They can be worn over most prescription glasses, ensuring optimal comfort for all users. Features: - Complete protection: Protects the eyes against impacts and shards of glass - Ergonomic design: Wraparound shape for enhanced safety - Compatible with prescription glasses: Practical, comfortable to wear - Ultra-lightweight: Only 44 g for long-lasting comfort Dimensions: 170 x 70 x 40 mm	Impact-resistant safety goggles €0.00
		Urethane tube opener €0.00
		Universal sharpening stone with handle €0.00
	Suction cup deluxe sold individualy (Ø 150 mm) Easier and safer to attach that common suction lifters with clamp lever technology. The bell shaped rubber pads already adhere onto the glass surface with slight pressing even before pressing the lever. Possibility to pass a belt through. Load capacity for each lifter is 80 kg.	Suction cup deluxe sold individualy (Ø 150 mm) €0.00
	A polyvalent product, it can be used to waterproof both spot-welded and demountable elements (e.g. sliding roofs). Butyl mastic sealing used for camper van roof window. The product is permanently elastic and resistant to UV rays. High solids content. Colour: black Packaging : Sold individually in 310 ml cartridges or in box of 12.	Butyl 460 sealant for all glass with or without seals €0.00
	Window holders (forside windows) Hold up the door glass while you work. Simply loop the cable over the door frame and attach the suction cups to each side of the glass. - 177 x 200 x 76 mm - 70 g	Window holders (forside windows) €0.00
	Squared cutting wire REPAREGLASS Surprising, but true! The cutting force of square wire is far superior to that of common round wire. Try it out for yourself, you'll be amazed! REF-VKD-22 Square wire. 0.6 x 0.6 mm, length: 22 m, wound on plastic spool. 691 NEWTON	Squared cutting wire - Size 0.6mm - 22ML €0.00
	Braided wire in a spool REPAREGLASS ø 0.80 mm, length: 22 m, Wound on a plastic spool. 1083 NEWTON The wire to be cut is twisted according to our exact specifications from three strong stainless steel wires. The wire is anodised in a typical "gold" colour.	Braided wire in a spool - - ø 0,80 mm - 22ML €0.00
	Just lay the wire in the notched tip and pass it through the polyurethane by pushing the tool from the inside to the outside. In the way, you can release the window. Always place the flat surface of the wire threader on the window, so that the hollow tube is not deformed. - 120 x 26 x 10 mm - 20 g	T-handles wire threader €0.00
		Christmas tree moulding remover €0.00
	Our knitted gloves provide effective protection against cuts, ideal for handling glass surfaces and sharp objects. Thanks to their robust design, they combine strength, comfort and optimal grip. Features: Knitted material: Excellent resistance to cuts and wear and tear Latex-coated palms: Enhanced grip for a secure hold Flexible and comfortable: Allow great dexterity and reduce hand fatigue Versatile use: Suitable for glass work, handling and construction Available sizes: M, L and XL	Cut-resistant knitted gloves €0.00
	Package of 5 pieces	Adhesives pads for rainsensors KPL -197:For BM Classe E,Mercedes €0.00
	Package of 5 pieces	Adhesives pads for rainsensors KPL-193: For BMW from september 2003 €0.00
	Package of 5 pieces Dimensions : 60 x 35 x 1,0 mm CHRYSLER GRAND CHEROKEE 2002 DAEWOO LACETTI 2004 DAEWOO NUBIRA 2003 DAEWOO TACUMA/REZZO 2005 HONDA ACCORD 2003-2008 HONDA FR-V 2004 HONDA LEGEND 2006 KIA OPIRUS 2003 NISSAN PRIMERA 2002	Adhesives pads for rainsensors KPR -196: For Chrysler, Deawoo,Kia,Honda,Hyundai, Nissan €0.00
	Package of 5 pieces	Adhesives pads for rainsensor KPL-192: For Renault Mégane,Nissan Micra €0.00
	Package of 5 pièces	Adhesives pads for rainsensors KPR -194: For Volkswagen group (thickness 1mm) €0.00
	Package of 5 pieces	Adhesives pads for rainsensors KPR -195: For Volkswagen group (thickness 1.5mm) €0.00
	Package of 5 pieces	Adhesives pads for rainsensors KPR -191: For DB classe A,Peugeot,Cïtroen €0.00
	Package of 5 pieces	Adhesives pads for rainsensors KPL -190: For Audi: A4,A6,A8,Q7,Opel Zafira et Corsa €0.00
		Rain / light sensor repair gel €0.00
		ACTIVATOR FOR APPLICATION OF SENSOR PADS €0.00
		RAIN/LIGHT CURVED SENSOR REPAIR GEL €0.00
		mixing nozzles €0.00
		RAIN SENSOR REPAIR MOULDS (SILICONES) 57mm x 40mm €0.00
		Measure tape €0.00
		Diagonal cutting plier 150 mm €0.00
	Package of 5 pieces	Repair adhesive pads photosensor KPL-192C for BMW, RENAULT €0.00
	Package of 5 pieces	Repair adhesive pads photosensor RÉF. KPL-154 for TOYOTA €0.00
	Package of 5 pieces	Repair adhesive pads photosensor- Dimensions : Ø32 x 1.5 mm -for SEAT, VW €0.00
	Package of 5 pieces	Repair adhesive pads photosensor RÉF. KPL-189B for CHRYSLER, JEEP €0.00
		Universal plier 250 mm €0.00
		Chain nose plier with cutter 200 mm €0.00
	REF. FSC-300SPECIAL SCRAPER (without blade) To scrape the old urethane bead. This scraper is universal due to the fact it can accept different blades width ( 13 mm – 16 mm – 20 mm) and angular blades	Special scraper €0.00
		Empty cart trolley without glass rack ans without foam inside the drawers €0.00

Square piano wire with a square-section of 0.6 mm - 44 ML - 2nd LIFE - N88

Accessoires indispensables

Data sheet