Reference: XKD-44A

New square cutting wire, Size 0.7 mm - 44M

XKD-44 - SQUARE PIANO WIRE - 44M 976 NEWTON Technical characteristics of our new REF-XKD-44 piano wire. - This is a square piano wire with a larger cross-section0.7 x 0.7 mm than the VKD-44 (0.6 x 0.6 mm). - The breaking strength of this rope is 36% higher than that of VKD-44. - Available in 44 ml rolls

Reference: XL2

Long Olfa® knife with a snap-off blade

Olfa® knife Snap-off blades have known a growing success in our filed, especially during these recent years. With this knife, you can cut the urethane that is far below the dashe of most vehicles. This knife is an extra-long version of the OLF20, it is particularly suitable for car glaziers.- 280 x 40 x 20 mm- 125 g

Reference: Z1

Cold knife blade 19 mm

Cold knife blade- Sold individually- Cutting length: 19 mm- 18gCARTON OF 10

Reference: Z30

Special cold knife blade 30 mm

This blade series enables you to use a cold knife where you could never use it before ! The 60 mm long blade isintended to cut all those hard to reach PU bondings that are far away from the glasses edge and where a normalcold knife blade could never reach. But also all lowerglass edges with surmounting wings and bonnets are aperfect field of application...

Reference: Z60

Special cold knife blade 60 mm

This blade series enables you to use a cold knife where you could never use it before ! The 60 mm long blade is intended to cut all those hard to reach PU bondings thatare far away from the glasses edge and where a normalcold knife blade could never reach. But also all lowerglass edges with surmounting wings and bonnets are aperfect field of application...

Reference: ZAW-010

Wiper puller for bolted-on wipers

Wiper puller for bolted-on wipersBecause windshield wipers have become larger, wiper arms are pressure-fitted to the posts so they will not slip. They are then secured with a nut to hold the arm in place so they will not lift. Until now, it was almost impossible to remove these wiper arms without breaking or damaging them or scratching the cowl. You no...

Reference: ZAW-025

Arm wiper puller tool

Arm wiper puller tool

Reference: ZAW-040

Arm wiper puller tool

REF. ZAW-040Arm wiper puller toolArm wiper puller tool with tighting screw for a simpleuse ( without additional tool)Adaptable for many cars

Reference: ZAW-095

Arm wiper puller tool

Arm wiper puller tool

Reference: ZAW-120

Windshield wiper arm removal tool

Extremely loadable. Made of massive metal. Can be used on virtually any passenger and commercial vehicle. Specially recommended for the BMW 5 and BMW 7 series.- 104 x 38 x 140 mm- 518 g

Reference: ZDK-500

Cold knife

Wheel step ladderBuilt with a chain to facilitate the setting when the wheel compartment and the wheel are very closer. Easy and fastadjusting system. Ready to use. The other advantage correspond to the fact it can be install for all vehicules contrary to the oldversion (rigid tube) which was fitting for only SUV and cars where the space between.The wheel...

Reference: ZK35

ZipKnife™ Cold Knife

ZipKnife™ Cold Knife has a unique design that allows you to maintain a high level of control at the cutting head, giving you the freedom to move unencumbered while exerting pressure in both cutting directions. Uses all standard cold knife blades Without blade.

Reference: 61

Double-sided masking tape 19 mm

Reference: 51854

50 mm Equalizer straight offset cutting blade

REF. 5185450 mm Equalizer straight offset cutting blade

Reference: 51855

U shape 19 mm Equalizer cutting blade

REF. 51855U shape 19 mm Equalizer cutting blade

Reference: 51857

U shape 38 mm Equalizer cutting blade

REF. 51857U shape 38 mm Equalizer cutting blade

Reference: DST-53

Curved wire threader 53 mm (package at 3 pièces)

Curved wire threader:The curved wire threader anables threading of the cutting wire evenwhere the gap between glass and pinch weld is very small.This is especially helpful on side and back windows where conventionalwire threaders are often difficult to use.The curved threader can be pushed through the adhesive bead from insideto outside or from outside to...

Reference: EHL-652

Latex-disposal gloves

Gloves are particularly suitable for touching the glass edges without leaving traces.- Package of 100 pieces.- 240 x 130 x 77 mm 1.000 g- Taille M - L - XL

Reference: G-KNYL

Nylon gloves with Polyurethane palm

Reference: G-POLY

Knitled / Polyurethane glaves.

Reference: GAVI

Full finger anti – Vibration gloves

Reference: GKEV

Kevlar gloves

Reference: SHL-109

Knitted gloves

Reference: SHM-108

Knitted gloves

Reference: SHX-110

Knitted gloves

WHICH GLOVE SIZE SHOULD I CHOOSE?Size M = size 8Size L = sizeSize XL = size 10

Reference: 1040-111

Tube for POWERPUSH 20V and 14.4V

For Pistolet Powerpush 20V et 14.4V Tube for saussage 400ml - Ref. 1040-111Tube for saussage 600ml - Ref. 1040-042

Reference: Z1022

Cold knife blade

This special blade reaches the urethane between the wheel cover and the side of the windshield.Its unique shape allows you to unbond the windshield with a cold knife, without having removed the wheel cover (also bond) before. Once the windshield is removed, you can unbond the wheel cover, wihtout risking to damage the remaining material.- Sold...

Reference: Z10RD

New COLD KNIFE BLADES SERRATED 19mm

REF-Z10RDNew ULTRAWIZ Cold knife bladeSold individually - Extra thin Cutting length: 19 mmCARTON OF 10

Reference: Z11RD

New COLD KNIFE BLADES SERRATED 25mm

REF-Z11RDNew ULTRAWIZ Cold knife bladeSold individually - Extra thin Cutting length: 25 mmCARTON OF 10

Reference: Z12RD

New COLD KNIFE BLADES SERRATED 38mm

New ULTRAWIZ Cold knife bladeSold individually - Extra thin Cutting length: 38mmCARTON OF 10

Reference: Z2

Cold knife blade 25 mm

Cold knife blade, extra fine- Sold individually- Cutting length: 25 mm- 18gCARTON OF 10

Reference: Z3

Cold knife blade 38 mm

Cold knife blade, extra fine- Sold individually- Cutting length: 38 mm- 20 gCARTON OF 10

Reference: Z4

Cold knife blade, extra fine 19 mm

Cold knife blade, extra fine cutting length: 19mm CARTON OF 10

Reference: Z5

Cold knife blade, extra fine 25 mm

Cold knife blade, extra fine - Sold individually - Cutting length: 25 mm - 18g CARTON OF 10

Reference: Z6

Cold knife blade, extra fine 38 mm

Cold knife blade, extra fine - Sold individually - Cutting length: 38 mm - 20 g CARTON OF 10

Reference: Z7

Cold knife blade coated, extra fine 19 mm

Cold knife blade coated, extra fine - Sold individually- Cutting length: 19 mm- 20gCARTON OF 10

Reference: Z7RV

New Paint Protection Reverse Bend Blade 19mm « ULTRAWIZ »

Nylon coating protects exposed paint from accidental blade contactIdeal for exposed glass with underside molding or encapsulationOffers the control a technician needs to cut awayfrom the glass or moldingAvailable in 3 lengths : 19 mm – 25 mm – 38 mm

Reference: Z8

Cold knife blade coated, extra fine 25 mm

Cold knife blade coated, extra fine - Sold individually- Cutting length: 25 mm- 20gCARTON OF 10

Reference: Z8RV

New Paint Protection Reverse Bend Blade 25mm « ULTRAWIZ »

Nylon coating protects exposed paint from accidental blade contactIdeal for exposed glass with underside molding or encapsulationOffers the control a technician needs to cut awayfrom the glass or moldingAvailable in 3 lengths : 19 mm – 25 mm – 38 mm

Reference: Z9

Cold knife blade coated, extra fine 38 mm

Cold knife blade coated, extra fine - Sold individually- Cutting length: 38 mm- 20gCARTON OF 10

Reference: Z9RV

New Paint Protection Reverse Bend Blade 38mm « ULTRAWIZ »

Nylon coating protects exposed paint from accidental blade contactIdeal for exposed glass with underside molding or encapsulationOffers the control a technician needs to cut awayfrom the glass or moldingAvailable in 3 lengths : 19 mm – 25 mm – 38 mm

Reference: KFS-300

Scraper kit in plastic case

Reference: RAPTOR

Rotating wire removal device - RAPTOR

The  Raptor™ is a cord and wire auto glass removal device designed from the ground-up to dramatically improve the power of the vacuum cup with the integration of our AirForce™ Constant Vacuum Cups. This technology has been specifically developed to create a quick placement and constant vacuum to the glass so the Raptor™ stays in place and resists...

Reference: SDK-202

Wire cut-out kit, with braided wire.

Wire cut-out kit, with braided wire.REPAREGLASSContains: - braided sawing wire,22m, REF-SD-22.- 1pair of wire handles (corkscrew shape), REF-REF-PAIG-200- 1 wire threader, REF-AIG-125 - 125 x 110 x 57 mm - 320 g

Reference: 8PY010600-911

Universal car brand diagnostic device - MEGAMACS PC

Reference: 8PD010601-931

Universal car brand diagnostic device - MEGAMACS PC

Reference: 8PD015269-101

CSC tool (VW )

Not available

Reference: AEB403

EQUALIZER® Excalibur® deluxe

The Excalibur® is a compact, lightweight, air-powered version of the Equlizer® . Theoratically, it works in the same way as the Equlizer® .However, since it is compact and lightweight,it is even handier, especially in areas that are hard to reach andwhen you work above the level of the head.Thestiking rate is 30% higher. In this way, vibrations are...

Reference: AEB405

EQUALIZER® Excalibur® deluxe

The Excalibur® is a compact, lightweight, air-powered version of the Equlizer® . Theoratically, it works in the same way as the Equlizer® .However, since it is compact and lightweight,it is even handier, especially in areas that are hard to reach andwhen you work above the level of the head.Thestiking rate is 30% higher. In this way, vibrations are...

Reference: DALLES

PVC floor tiles

Reference: DSS-175

One-man wire cut-out tool

One-man wire cut-out toolREPAREGLASSOne-man wire cut-out toolThis tool acts like another person sitting inside the vehicle pulling the wire back after you havemade your cutting stroke.Attached to the swivel is a spring that acts as a second person; you pull the wire out to make your cut and the springs pulls the wire back in. The spring is attached to a...

Reference: ECHAF-PLIABLE-2.5

2.22M ALUMINIUM folding scaffold

Reference: ECHAF-PLIABLE-3.0

2.95M folding scaffolding

Reference: ECHAFAUDAGE

3.07M MOBILE SCAFFOLDING FOR TRUCKS AND BUS

Reference: EES804

EQUALIZER® sheath 100mm

EQUALIZER® sheath 100mm The sheath is the unique, patented idea that makes the EQUALIZER® line of tools work. The sheath is a protective sleeve that surrounds the blade will not damage the dash or garnish mouldings. Sheaths are available in the three sizes: 10,20 and 30cm. The smallest one is generally used to surround small side windows. The middle size...

Reference: EES808

EQUALIZER® sheath 200mm

EQUALIZER® sheath 200mm The sheath is the unique, patented idea that makes the EQUALIZER® line of tools work. The sheath is a protective sleeve that surrounds the blade will not damage the dash or garnish mouldings. Sheaths are available in the three sizes: 10,20 and 30cm. The smallest one is generally used to surround small side windows. The middle size...

Reference: EES812

EQUALIZER® sheath 300mm

EQUALIZER® sheath 300mm The sheath is the unique, patented idea that makes the EQUALIZER® line of tools work. The sheath is a protective sleeve that surrounds the blade will not damage the dash or garnish mouldings. Sheaths are available in the three sizes: 10,20 and 30cm. The smallest one is generally used to surround small side windows. The middle size...

Reference: EGK150

Air-powered cold knife EQUALIZER® Ninja standard

Air-powered cold knifeThe Equalizer Ninja and Ninja GT are revolutionary auto glass removal tools that allow you to remove any glass fast and effortlessly. They have the look and feel of a cold knife, but cut with the power of 22,000 cutting strokes per minute. Here is how they work: the blade moves back and forth at 22,000 strokes per minute. As you pull...

Reference: ENJ147

EQUALIZER® Ninja standard kit

The Equalizer Ninja and Ninja GT are revolutionary auto glass removal tools that allow you to remove any glass fast and effortlessly. They have the look and feel of a cold knife, but cut with the power of 22,000 cutting strokes per minute. Here is how they work: the blade moves back and forth at22,000 strokes per minute. As you pull the Equalizer Ninja...

Reference: ENK148

EQUALIZER® Ninja deluxe kit

The Equalizer Ninja and Ninja GT are revolutionary auto glass removal tools that allow you to remove any glass fast and effortlessly. They have the look and feel of a cold knife, but cut with the power of 22,000 cutting strokes per minute. Here is how they work: the blade moves back and forth at22,000 strokes per minute. As you pull the Equalizer Ninja...

Reference: FSC1.7BAT

FEIN battery powered knife

The high-performance cordless oscillating machine with rapid clamping system for automotive work. Supplied with 2 batteries and a charger -Same performance as the corded version, with maximum working speed for professional use in a variety of applications/sectors. High-performance 18 V Li-Ion batteries with charge indicator. Ultra-modern Li-Ion...

Reference: FSC1.7QBAT

FEIN battery powered knife with 12 blades

The powerful system for vehicle repairs with special accessories for quick and safe removal of vehicle windows. High-performance battery-powered SuperCut developed specially for use in vehicle glazing. Complete set in high-quality tool case with the key accessories for removing the most common vehicle windscreens. Convenient accessory changes without the...

Reference: GBM-27

27 PCS Trim Removal Kit

27 PCS Trim Removal Kit 01 : Wide Scraper ToolFor scapig wit large area to cover02 : General Scraper ToolFor removing gaskets and umium or steel03 : Wide Pry Tool-Flat TypeFor remove panele or large plastic arts04 : General Wide EdgeIdeal for splitting soft plastic arts05 : Flat Scraper ToolIdeal for removing trim and residue frombodywork06 : General...

Reference: GCN-100

Nylon wire - ø 1,1 mm - 100ML

L: 100M 2500 NEWTON Nylon wire- Diam 1.1mm ESPECIALLY DESIGN FOR THICK AND HEAVY PU Ideal for : -Old urethane -Thick and heavy PU -Trims which must not brake ( clips – fastener – spacers) -Brakes at an high tensile strength -Reusable length ( from about 2 to 4 applications) -Do not scratch surfaces -Could be use with most of the ratchet systems...

Reference: GEZ-150-1

Set of vacuum lifter - -load capacity 30kg

Vacuum lifterØ 150 mm REPAREGLASSThese vacuum lifter have been specially designed for windsheild setting and removal.Their unique shape allows a good hand holding. The flowing shape and the smooth surface of the handles allow a greater control of large windows.To install a windshield, we ercommend beginning by doing a test. The setting of the windsheild...

Reference: GEZ-543-1

Set of vacuum lifter -load capacity 62kg

Vacuum lifterØ 150 mmREPAREGLASSThese vacuum lifter have been specially designed for windsheild setting and removal.Their unique shape allows a good hand holding. The flowing shape and the smooth surface of the handles allow a greater control of large windows.To install a windshield, we ercommend beginning by doing a test. The setting of the windsheild...

Reference: LH-683

Christmas tree moulding remover

Reference: LM-460

Long knife with a blade

Long knife with 1 blade Some vehicles have extra-long dashes. So you have to cut the bond from the inside. As long as the band of urethane is not too thick, you can use knives designed to cut urethane. Two lengths are available: 46 cm (standard) and 61 cm (designed for vehicles with a high windshield slope and with ewtra-long dashes). Both are made of...

Reference: LM-610

Long knife with a blade

Long knife with 1 blade Some vehicles have extra-long dashes. So you have to cut the bond from the inside. As long as the band of urethane is not too thick, you can use knives designed to cut urethane. Two lengths are available: 46 cm (standard) and 61 cm (designed for vehicles with a high windshield slope and with ewtra-long dashes). Both are made of...

Reference: NSE-827

Telescopic glass rack with 5 compartments, with unscrewing and removing tubes

Delivered without castors

Reference: NSE-828

Telescopic glass rack with 9 compartments, with unscrewing and removing tubes.

Delivered without castors

Reference: PSH-120

Pair of suction cups - Load capacity: around 80kg

Pairof suction cups (Ø 120 mm)Vacuum cups allow you to hold safely a window that is ready to install. The edge of the window must not be touched once the window is ready for the installation. Each vacuum swivels up and down approximately 30° to fit radically contoured glass. Simply set the vacuum cups in place and push the thumb latches down to engage the...

Reference: PWR-2020

Ultrasonic leak detector and transmitter, delivered in a plastic tool box

Ultrasonic leak detector and transmitter Bonded windows have very often leaks that are difficult to detect. With our leak detector, you can easily find the leaks. The leak detector consists of a detector and a transmitter. The transmitter sends an ultrasound (human beings cannot hear it) in the compartment. From the exterior, you place the reception...

Reference: UCM1529-1600

Universal Cowl Moulding

Universal Cowl MouldingRÉF. UCM-1529Designed to solve the problemof ensuring a solid adhesive bondof the rubber strip to the cowl afterwindshield replacement or to simplyreplace the vehicle’s cowl moulding whenit deteriorates, tears, or breaks.Use the pocket heater or in caseof cold weather temperature to easethe installationREF. HWM618.• Roll - 30 m.

Reference: ULTRAPOSE3

Brand: L'ULTRAPOSE

ULTRAPOSE 3 - WINDSHIELD SETTING / LIFTING DEVICE FOR ON OPERATOR

Technical movie: Vidéo

Reference: VB19105

TRIM CLIP COMPOUND - CITROEN

Sold in packs of 10

Reference: VB19105

TRIM CLIP COMPOUND - FIAT

Sold in packs of 10

Reference: VB19105

TRIM CLIP COMPOUND- LANCIA

TRIM CLIP COMPOUND- LANCIA PhedraSold in packs of 10 REF-VB9105 - Trim clip compound - N°20 Typology: Trim clip compound Colour: White For Renault Clio II - 1998, Clio III - 2005, Megane, Kangoo, Kangoo II Door - panel Clio II - 1998, Clio III - 2005, Megane, Kangoo, Kangoo II Trim Clio II - 1998, Clio III - 2005, Megane,...

Reference: VB19105

TRIM CLIP COMPOUND - PEUGEOT

TRIM CLIP COMPOUND - PEUGEOT 207, 807, Expert III, Partner, Partner Tepee, 407Sold in packs of 10 REF-VB9105 - Trim clip compound - N°20 Typology: Trim clip compound Colour: White For Renault Clio II - 1998, Clio III - 2005, Megane, Kangoo, Kangoo II Door - panel Clio II - 1998, Clio III - 2005, Megane, Kangoo, Kangoo II Trim...

Reference: VB19105

TRIM CLIP COMPOUND - RENAULT

Sold in packs of 10

Reference: ZDK-395

Cold knife with neoprene cover

Cold knife with neoprene cover REPAREGLASS To prevent paint damage and for more handiness. This knife is one of the most useful tools for windshield installers. It has been used for 30 years worldwide and has hardly ever been changed during that time.One evolution had tobe taken into account though: paint jobs have become more complicated. Generally, many...

Reference: ZLN-914

Nylon wire - Ø 1.05 mm, Longueur : 100 ML - 2000 Newton

- Multi-purpose with 1 length (approx. 2 to 4 uses) - Does not scratch surfaces - No snags on the windscreen bay or windscreen seal - Can be used with all ratchet systems - Very fine Ø 1.05 mm, Length: 100 M 2000 Newton

Reference: CC-1058

Nitrile gloves

NITRILE GLOVES (POWDER-FREE) Raw material: Nitrile rubber. Does not contain natural rubber latex. The components used to manufacture the gloves may cause allergic reactions in some users. Good quality nitrile gloves providing an excellent biological barrier. Store in a cool, dry place, avoid excessive heat (40°C, 104°F) The opened box should be protected...

Reference: SYSTEME-PROTECTION-DE-BAIE

Pinchweld protection system

Everyprotector they used could not withstand repeated hits by a power tool blade and would jump out of the pinchweld,leaving the paint exposed to potential harm. Tape worked to some extent, but would not hold sufficient downward pressure tokeep the pinchweld protector in place.This kit includes 4 different lengths of a high impact metal that will absorb...

Reference: KIT-32

Brand: REPAREGLASS

Windscreen tool case (32 items)

Reference: KIT-32

Windscreen tool case (32 items)

Reference: KIT-BTB

BTB kit

BTB range in the case: Pneumatic windshield removalVery lightweight knife: 1,1kg – Very little physical effort – Cutting of interior or exterior- Air consumption: between 30m/min and 104l/min maxi. Very silent, vibration complying with the European directive 2002/44/CEBTB kit: Contains: - 1 operating instruction- 1 CD- 1 pneumatic knife REF-WK10HD - 1...

Reference: ROLL-N-CUT

ROLL N CUT - A simply system to cut-out windshieds with wrenches

A simply system to cut-out windshieds with wrenches. This system is exceptional in that it is designed to be used with a single suction cup, which is easy to move thanks to the regulator attached to the unit. The box includes a metal protection strip and polyethylene protectors. A suction-cup-mounted piano wire reel is also supplied, which is positioned...

Reference: 8PY010600-041

LICENCE HOTLINE 50 TICKETS

Not avalaible

Reference: ULTRAPOSE-EVOLUTION

Brand: L'ULTRAPOSE

ULTRA-POSE EVOLUTION - NEW WINDSHIELD MOTORIZED FITTING/ LIFTING SYSTEM- SINGLE OPERATOR FOR CARS - SUV AND VANS

Technical movie: Vidéo

Reference: BOB-FIBRE

Cleaning towels « Ecological »

Reference: SERV-OPB-DELUXE

Windshield tools cart trolley DELUXE

Reference: SERV-OPB-COMPLETE

Specific complete glass and tools cart trolley

Reference: SERV-OPB-PRO

SPECIFIC GLASS CART TROLLEY

Reference: PCG12-400

Pistolet MILWAUKEE 12V Lithium

MILWAUKEE gun 12V Lithium

Reference: V-04200101NEW

Rubber plate new model

Rubber plate new model

Reference: FSC1.7POIGNEE

Pull handle for FSC1.7BAT

Reference: DST-58

Curved wire threader 58 mm (package at 3 pièces)

Curved wire threader:The curved wire threader anables threading of the cutting wire evenwhere the gap between glass and pinch weld is very small.This is especially helpful on side and back windows where conventionalwire threaders are often difficult to use.The curved threader can be pushed through the adhesive bead from insideto outside or from outside to...

Reference: DST-61

Curved wire threader 61 mm (package at 3 pièces)

Curved wire threader:The curved wire threader anables threading of the cutting wire evenwhere the gap between glass and pinch weld is very small.This is especially helpful on side and back windows where conventionalwire threaders are often difficult to use.The curved threader can be pushed through the adhesive bead from insideto outside or from outside to...

Reference: PWR-5067-18V

Rod for MILWAUKEE 18V

Rod for 310- 400ml(344mm)