• Our videos

  • Banner

Best sellers

There are 1435 products.

Showing 101-200 of 1435 item(s)

Reference: SD-21

Braided wire - ø 0,80 mm - 22.5M

Braided wire21 ml REPAREGLASSBraided wire The braided wire is made of three stainless steel resistant wires that are braided to one strand. The wire is anodized (with a traditional gold colour). It has a 0.80mm diameter.

Reference: EHL-652

Latex-disposal gloves

Gloves are particularly suitable for touching the glass edges without leaving traces.- Package of 100 pieces.- 240 x 130 x 77 mm 1.000 g- Taille M - L - XL

Reference: HDS-480NEW

Adjustable windshield trestle

Adjustable windshield trestleREPAREGLASS- width multi-adjustable for different lengths and weights so as carry all sizes of windshields.- Very sturdy version, load capacity up to 250Kg.- Made of electroplated steel, diameter: 30 mm.- Resistant foam at the base of the trestle.- 105 cm x 95 cm x 110 cm6.700 kg

Reference: FSC-350

Brand: REPAREGLASS

Special scraper

REF. FSC-350SCRAPER (without blade)To scrape the old urethane bead. This scraper is universal due to thefact it can accept different blades width ( 13 mm – 16 mm – 20 mm)and angular bladesIts locking system with roll allow a quick and easy blade replacement

Reference: XL2

Long Olfa® knife with a snap-off blade

Olfa® knife Snap-off blades have known a growing success in our filed, especially during these recent years. With this knife, you can cut the urethane that is far below the dashe of most vehicles. This knife is an extra-long version of the OLF20, it is particularly suitable for car glaziers.- 280 x 40 x 20 mm- 125 g

Reference: Z1022

Cold knife blade

This special blade reaches the urethane between the wheel cover and the side of the windshield.Its unique shape allows you to unbond the windshield with a cold knife, without having removed the wheel cover (also bond) before. Once the windshield is removed, you can unbond the wheel cover, wihtout risking to damage the remaining material.- Sold...

Reference: PAIG-200

Wire gripping handles (corkscrew shape)

Wire gripping handlesIdeal solution to work rapidly and without problem. Feed the wire through the hole in the wedge shaft (fig A), loop it through the hole at the top of the shaft (fig B) and then bring it back into the large plastic handle. By pressing the wedge back into the handle, the wire is held in place (fig C). To shorten the wire, press down on...

Reference: VB9096

RIVET IN PLASTIC - PEUGEOT

RIVET IN PLASTIC - PEUGEOT 206Sold in packs of 10 REF-VB9096 Rivet in plastic n° 8 Typology: Rivet in plastic Colour: Black Material: Nylon Polyamide PA6  PEUGEOT: 206

Reference: VB4000408

FASTENER - PEUGEOT

WS-Fastener white - PEUGEOT 206 (98-06)Sold in packs of 10 REF-VB4000408 Staple for wipers motor cap ( x 10 ) n° 25 PEUGEOT 206 (98-06) - WS-Fastener white Weight: 0.0007 kg

Reference: VB19105

TRIM CLIP COMPOUND - PEUGEOT

TRIM CLIP COMPOUND - PEUGEOT 207, 807, Expert III, Partner, Partner Tepee, 407Sold in packs of 10 REF-VB9105 - Trim clip compound - N°20 Typology: Trim clip compound Colour: White For Renault Clio II - 1998, Clio III - 2005, Megane, Kangoo, Kangoo II Door - panel Clio II - 1998, Clio III - 2005, Megane, Kangoo, Kangoo II Trim...

Reference: PSH-120

Pair of suction cups - Load capacity: around 80kg

Pairof suction cups (Ø 120 mm)Vacuum cups allow you to hold safely a window that is ready to install. The edge of the window must not be touched once the window is ready for the installation. Each vacuum swivels up and down approximately 30° to fit radically contoured glass. Simply set the vacuum cups in place and push the thumb latches down to engage the...

Reference: AB10

9 mm snap-off blades for ol30 knives

9 mm Snap-off blades forOL30 knives (Package of 10 pieces) Olfa®knife Standard knives with a wide 18mm blade are generally too wide to accomplish fine jobs. With its retractable blade of 9mm wide, this knife allows a fine cutting with one hand. - 85 x 9 x 0,4 mm - 38 g (Package of 10 pieces)

Reference: CGE-148

Clip removal tool

Clip removal tool This tool is used to remove plastic clips on door linings. It fits easily down into the recessed area and then can slid under the head of the cowling clip. You then pull up on the center locking part and the clip can be removed. - 235 x 35 x 30 mm - 165 g

Reference: AIG-730

T-handles wire threader

Just lay the wire in the notched tip and pass it through the polyurethane by pushing the tool from the inside to the outside.In the way, you can release the window. Always place the flat surface of the wire threader on the window, so that the hollow tube is not deformed.- 120 x 26 x 10 mm - 20

Reference: JU100

Universal mouldings • 7 mm x 22,8 m

Universal mouldingsExcellent forming and adhesion. Remain flexible even withlow temperatures. Butyl adhesive- No cracking, no weakness, no distorsion REF-JU100• 7 mm x 22,8 mFor T4 PLEASE ASK OUR KEYCHAIN SAMPLE WHICH WILL ALLOWS TO DISCOVEROUR UNIVERSAL MOULDING RANGE.Supplied with a detail list with many exemple of cars that cover.)

Reference: 3007-K

UltraWiz® cold knife

Fully-adjustable cold knife. The only one available on the market today. Pull on the lever to release the blade, push down on the lever to block the blade (at any height). To exchange the blade, you do not need to unscrw the screw nut anymore, so you do not waste time anymore. With this new very handy knife, you really save time.

Reference: RAPTOR

Rotating wire removal device - RAPTOR

The  Raptor™ is a cord and wire auto glass removal device designed from the ground-up to dramatically improve the power of the vacuum cup with the integration of our AirForce™ Constant Vacuum Cups. This technology has been specifically developed to create a quick placement and constant vacuum to the glass so the Raptor™ stays in place and resists...

Reference: ESB1312

EQUALIZER® blade 300mm.

EQUALIZER® blade 300mm.Serrated blades and sheathsThese patented blades are made of spring steel and specifically designed for our tools. They are sharpened with a unique double-serration method. Each serration is also serrated. this sharpening method gives our EQUALIZER® blades a smoother and faster cutting action than ever before. These blades will fit...

Reference: VB4000425

WS-CLIP A-PILLAR WHITE - PEUGEOT

WS-CLIP A-PILLAR WHITE -N°38 / PEUGEOT, 407 Berline / Break (04-10), 308 (07-) et 308 CC (09-)Sold in packs of 10 REF VB4000425WS-CLIP A-PILLAR WHITE(Set of 10) for Poids: 0.001 kgS

Reference: MTS-068

Hook and pick set

Hook and pick setThis set of mini hooks is very helpful to remove joints and coverings while avoiding any possible damage.This practical set contains hooks in different shapes and a pick. The length of these tools is only 13mm! - 127 x 25 x 25 mm - 280 g

Reference: SGR-120

BLADE HOLDER SCRAPER

Blade holder scraper.Large scraper blade holder with retractable blade compartment for a safe use. Very practical to remove insurance stickers on the glass