Filter By
Categories
Categories
Packaging
Packaging
Brand
Brand
VBSA awarded ECOVADIS label
Banner
There are 1618 products.
Reference: SHX-110
Our high-protection knit gloves are designed for comfort, durability and safety. Made of cotton and nylon, they are extremely strong yet comfortable to wear. Thanks to their non-slip coating and internal traction points, they guarantee effective protection against cuts while maintaining good tactile sensitivity. Characteristics: - Material: Cotton and...
Reference: TUBE-POWERPUSH
Replacement tube specially designed for PowerPush battery-powered spray guns. Ideal for bonding and sealing work, this tube guarantees uniform and precise distribution of your product. Made of robust, chemical-resistant material, this tube ensures optimal longevity and intensive workshop use.
Reference: Z1022
This special blade reaches the urethane between the wheel cover and the side of the windshield.Its unique shape allows you to unbond the windshield with a cold knife, without having removed the wheel cover (also bond) before. Once the windshield is removed, you can unbond the wheel cover, wihtout risking to damage the remaining material.- Sold...
Reference: Z10RD
REF-Z10RDNew ULTRAWIZ Cold knife bladeSold individually - Extra thin Cutting length: 19 mmCARTON OF 10
Reference: Z11RD
REF-Z11RDNew ULTRAWIZ Cold knife bladeSold individually - Extra thin Cutting length: 25 mmCARTON OF 10
Reference: Z12RD
New ULTRAWIZ Cold knife bladeSold individually - Extra thin Cutting length: 38mmCARTON OF 10
Reference: Z2
Cold knife blade, extra fine- Sold individually- Cutting length: 25 mm- 18gCARTON OF 10
Reference: Z3
Cold knife blade, extra fine- Sold individually- Cutting length: 38 mm- 20 gCARTON OF 10
Reference: Z4
Cold knife blade, extra fine cutting length: 19mm CARTON OF 10
Reference: Z5
Cold knife blade, extra fine - Sold individually - Cutting length: 25 mm - 18g CARTON OF 10
Reference: Z6
Cold knife blade, extra fine - Sold individually - Cutting length: 38 mm - 20 g CARTON OF 10
Reference: Z7
Cold knife blade coated, extra fine - Sold individually- Cutting length: 19 mm- 20gCARTON OF 10
Reference: Z7RV
Nylon coating protects exposed paint from accidental blade contactIdeal for exposed glass with underside molding or encapsulationOffers the control a technician needs to cut awayfrom the glass or moldingAvailable in 3 lengths : 19 mm – 25 mm – 38 mm
Reference: Z8
Cold knife blade coated, extra fine - Sold individually- Cutting length: 25 mm- 20gCARTON OF 10
Reference: Z8RV
Nylon coating protects exposed paint from accidental blade contactIdeal for exposed glass with underside molding or encapsulationOffers the control a technician needs to cut awayfrom the glass or moldingAvailable in 3 lengths : 19 mm – 25 mm – 38 mm
Reference: Z9
Cold knife blade coated, extra fine - Sold individually- Cutting length: 38 mm- 20gCARTON OF 10
Reference: Z9RV
Nylon coating protects exposed paint from accidental blade contactIdeal for exposed glass with underside molding or encapsulationOffers the control a technician needs to cut awayfrom the glass or moldingAvailable in 3 lengths : 19 mm – 25 mm – 38 mm
Reference: RAPTOR
The Raptor™ is a cord and wire auto glass removal device designed from the ground-up to dramatically improve the power of the vacuum cup with the integration of our AirForce™ Constant Vacuum Cups. This technology has been specifically developed to create a quick placement and constant vacuum to the glass so the Raptor™ stays in place and resists...
Reference: DSS-175
One-man wire cut-out toolREPAREGLASSOne-man wire cut-out toolThis tool acts like another person sitting inside the vehicle pulling the wire back after you havemade your cutting stroke.Attached to the swivel is a spring that acts as a second person; you pull the wire out to make your cut and the springs pulls the wire back in. The spring is attached to a...
Reference: EGK150
The Ninja™ GT Deluxe is the improved and reinforced version of the famous Ninja™ pneumatic knife. Designed for the most demanding cold cutting applications, it features two ball bearings, a more powerful motor and an exhaust silencer that redirects air away from the vehicle for optimal working comfort. Exceptional performance and versatility: Optimized...
Reference: ENJ147
The Equalizer® Ninja Standard kit is revolutionizing cold cutting in the automotive glazing industry. This high-performance pneumatic knife is designed to fit all vehicle models, offering power, precision, and speed in a compact and easy-to-handle format. At first glance, the Ninja looks like a standard tool. However, its 22,000 oscillations per minute...
Reference: ENK148
The Equalizer® Ninja Deluxe kit is the essential tool for glass professionals for fast, precise and efficient cold cutting. Suitable for all types of vehicles, this pneumatic knife combines power, ergonomics and maneuverability, with up to 22,000 oscillations per minute for effortless work, even in the most complex areas. Key features: Exceptional...
Reference: FSC1.7BAT
Discover an innovative, high-performance solution for automotive work, combining power, precision and practicality. Technical specifications: Battery voltage: 18 V Battery capacity: 5 Ah Oscillations: 10,000 - 19,500 rpm Weight with battery: 1.8 kg Amplitude: 2 x 1.7 Tool holder: hexagonal Please note: Supplied without blade, battery or charger. -...
Reference: FSC1.7QBAT
Optimize your cutting tasks with this FEIN battery-powered knife, a high-performance tool designed to meet the needs of demanding professionals. Supplied with a complete set of 12 blades, two batteries and a charger, it offers everything you need for precise, efficient cutting. Key features: Exceptional versatility: Suitable for a wide variety of jobs...
Reference: FZS-128
HOOD PROTECTION - 1400 x 1840 mm Several sizes available: FENDER PROTECTION: Suitable for fender protection - 1400 x 800 mm FRONT PROTECTION: Suitable for front panel protection - 1900 x 700 mm CUSTOM DESIGN: Contact us Can also be made to measure on request for glazing, lorries, buses, underground railways, public works, etc.
Reference: GBM-27
The essential tool for precise, safe disassembly of bodywork and interior components. This set of 27 spatula levers is specially designed to meet the needs of bodybuilders and garages. It makes it easy to dismantle mirror faces, interior trim and other delicate components, without requiring the use of other protection. Advantages: Safe work: Allows work...
Reference: GCN-100
L: 100M 2500 NEWTON Nylon wire- Diam 1.1mm ESPECIALLY DESIGN FOR THICK AND HEAVY PU Ideal for : -Old urethane -Thick and heavy PU -Trims which must not brake ( clips – fastener – spacers) -Brakes at an high tensile strength -Reusable length ( from about 2 to 4 applications) -Do not scratch surfaces -Could be use with most of the ratchet systems...
Reference: GEZ-150-1
Vacuum lifterØ 150 mm REPAREGLASSThese vacuum lifter have been specially designed for windsheild setting and removal.Their unique shape allows a good hand holding. The flowing shape and the smooth surface of the handles allow a greater control of large windows.To install a windshield, we ercommend beginning by doing a test. The setting of the windsheild...
Reference: GEZ-543-1
Vacuum lifterØ 150 mmREPAREGLASSThese vacuum lifter have been specially designed for windsheild setting and removal.Their unique shape allows a good hand holding. The flowing shape and the smooth surface of the handles allow a greater control of large windows.To install a windshield, we ercommend beginning by doing a test. The setting of the windsheild...
Reference: LM-460
Long knife with 1 blade Some vehicles have extra-long dashes. So you have to cut the bond from the inside. As long as the band of urethane is not too thick, you can use knives designed to cut urethane. Two lengths are available: 46 cm (standard) and 61 cm (designed for vehicles with a high windshield slope and with ewtra-long dashes). Both are made of...
Reference: LM-610
Long knife with 1 blade Some vehicles have extra-long dashes. So you have to cut the bond from the inside. As long as the band of urethane is not too thick, you can use knives designed to cut urethane. Two lengths are available: 46 cm (standard) and 61 cm (designed for vehicles with a high windshield slope and with ewtra-long dashes). Both are made of...
Reference: NSE-827
Delivered without castors
Reference: NSE-828
Delivered without castors
Reference: PSH-120
Pairof suction cups (Ø 120 mm)Vacuum cups allow you to hold safely a window that is ready to install. The edge of the window must not be touched once the window is ready for the installation. Each vacuum swivels up and down approximately 30° to fit radically contoured glass. Simply set the vacuum cups in place and push the thumb latches down to engage the...
Reference: PWR-2020
Easily locate leaks invisible to the naked eye with this ultrasonic air/water leak detector, specially designed to check the tightness of bonded windows after installation. The system consists of a transmitter, placed inside the vehicle, which emits inaudible ultrasonic waves, and a receiver equipped with a directional microphone. By moving the receiver...
Reference: UCM1529-1600
Our seals for plastic windows have been designed to solve the problems associated with the difficulty of maintaining a good seal on plastic windows after the windshield has been replaced, or even when it has to be replaced when it is damaged, torn or broken. This specific roll of seal has been designed for simple, effective installation thanks to its...
Reference: VB19105
TRIM CLIP COMPOUND- LANCIA PhedraSold in packs of 10 REF-VB9105 - Trim clip compound - N°20 Typology: Trim clip compound Colour: White For Renault Clio II - 1998, Clio III - 2005, Megane, Kangoo, Kangoo II Door - panel Clio II - 1998, Clio III - 2005, Megane, Kangoo, Kangoo II Trim Clio II - 1998, Clio III - 2005, Megane,...
Reference: VB19105
TRIM CLIP COMPOUND - PEUGEOT 207, 807, Expert III, Partner, Partner Tepee, 407Sold in packs of 10 REF-VB9105 - Trim clip compound - N°20 Typology: Trim clip compound Colour: White For Renault Clio II - 1998, Clio III - 2005, Megane, Kangoo, Kangoo II Door - panel Clio II - 1998, Clio III - 2005, Megane, Kangoo, Kangoo II Trim...
Reference: ZDK-395
The REPAREGLASS neoprene-coated cold knife is an essential tool for windshield installation professionals. Designed for cold cutting, it features a neoprene coating that provides a safer grip while protecting the painted surfaces of the vehicle. Used worldwide for over 30 years, this knife has evolved to meet today's requirements: modern paints are more...
Reference: ZLN-914
- Multi-purpose with 1 length (approx. 2 to 4 uses) - Does not scratch surfaces - No snags on the windscreen bay or windscreen seal - Can be used with all ratchet systems - Very fine Ø 1.05 mm, Length: 100 M 2000 Newton
Reference: CC-1058
Our nitrile gloves provide an excellent biological barrier while guaranteeing optimal comfort thanks to their elasticity and stretchability. Designed without latex, they reduce the risk of allergies while providing effective protection against viruses and chemicals. Powder-free, they minimize the risk of contamination and are suitable for environments...
Reference: SYSTEME-PROTECTION-DE-BAIE
Effectively protecting the windshield bay during cutting has long been a challenge for technicians. Traditional methods, such as inserting a protective shield between the glass and the bay, are often ineffective against the repeated vibrations and impacts of electric or pneumatic tools. These tools can displace or damage the protective shield, exposing...
Reference: KIT-BTB
The BTB Kit is a complete, high-performance pneumatic solution for cutting windshields quickly and efficiently, whether from inside or outside the vehicle. Designed to minimize physical effort, its ultra-lightweight knife (1.1 kg) ensures easy and comfortable handling, even during long jobs. Very quiet and compliant with European Directive 2002/44/EC on...
Reference: ULTRAPOSE-EVOLUTION
Brand: L'ULTRAPOSE
This product has received significant recognition, having won the Bodywork of the Year 2017 award, which is a testament to its quality and innovation in the field. This system has several features and advantages that make it particularly attractive to professionals in the automotive bodywork and glazing industry: Motorised system for removing and...
Reference: PCG12-400
Designed for demanding professionals, this MILWAUKEE gun works with 310 ml cartridges and 400 ml pods. It offers up to 1780 Nm of thrust, ensuring efficient extrusion, even with the thickest adhesives or at low temperatures. Includes: 12V Li-Ion 2.0 Ah battery Charger Carrying case
Reference: FSC1.7POIGNEE
Highly recommended for optimal handling and better cutting control, this handle improves the precision and stability of the tool, especially during complex or prolonged cutting tasks. An essential accessory for getting the most out of your FEIN cordless knife.
Reference: DST-58
Curved wire threader:The curved wire threader anables threading of the cutting wire evenwhere the gap between glass and pinch weld is very small.This is especially helpful on side and back windows where conventionalwire threaders are often difficult to use.The curved threader can be pushed through the adhesive bead from insideto outside or from outside to...
Reference: VB62175
Trim clip - Bush for LANCIA - FIAT - ALFA ROMEOTRIM CLIP- LANCIA - THESISSold in packs of 10 Typology: Trim clip - Bush Colour: Yellow Material: Nylon Polyamide PA6
Reference: 8PZ010611-381
Housse de protection pour : CSC-TOOL CSC-TOOL-MOBILE
Reference: 8PZ010611-321
Le module laser aimanté permet d'ajuster certains types de radars. Pour cela le faisceau laser du module est projeté sur le miroir du radar. Certains radars sont équipés d'origine avec ce miroir. Pour les systèmes qui ne disposent pas d'un miroir, il convient d'installer le miroir du CSC 4-03. Le faisceau laser renvoyé par le miroir permet alors d'ajuster...
Reference: VB10011
RENAULT - All types of vehicles Sold in bags of 10 Plastic nuts for sheet metal screws - N°9
Reference: VB10011
FIAT - All types of vehicles Sold in bags of 10 Plastic nuts for sheet metal screws - N°9
Reference: BAL-12
The MILWAUKEE 12V LED Light Battery Pack offers optimum lighting power thanks to its 3 LEDs providing 220 lumens, guaranteeing increased visibility even in the darkest of spaces. Its compact design allows easy access to confined spaces, ideal for professionals working in cramped environments. Features: - Powerful lighting: 3 LEDs providing 220 lumens for...
Reference: 113656
Set of 4 wheels for handble rolling tool-box (Ref. CS-RC14)
Reference: WK28RM
Right hand, inverted BTB blade, 25 mmManual or pneumatic use.
Reference: ZK45
The ZIPKNIFE™ compact cold knife is specially designed for precise cutting in narrow and hard-to-reach areas. Its small size and ergonomic grip provide excellent control for efficient and safe working. Ideal for delicate work, it is designed for use exclusively with our cold knife blades. Sold without blade.
Reference: PWR-2016-112
Circular washer specially designed for fitting cartridges to MILWAUKEE 12V guns. It guarantees optimum cartridge retention in the cylinder, ensuring stable, even extrusion. An essential accessory for precise, efficient use of your Milwaukee gun.
Reference: V54RACK600
The 600 ml rack is an essential accessory for adapting your V54 gun for use with 600 ml cartridges. Designed specifically for this model, it allows for quick and efficient conversion, while ensuring smooth and consistent extrusion. Features: 600 ml rack for V54 gun Allows conversion of the gun to 600 ml format Quick and easy installation Compatible with...
Reference: V54TUBE-600
The 600 ml tube is designed to adapt your V54 gun for use with 600 ml cartridges or flexible pouches. Robust and easy to install, it allows quick conversion of the gun to meet the needs of automotive glazing professionals. Features: 600 ml tube for V54 gun Allows conversion of the V54 gun to 600 ml format Ideal for high-volume windshield bonding...
Reference: SERV-OPB-NUE
Compose your workshop trolley which corresponds to your needs & which looks like you ! It is made for you... It is made by you ! Please note: You have 5 small drawers and 2 large drawers, think about it during your design.
Reference: SERV-OPB-T2
Also note that this drawer is in selection for the "Servante à la carte" (custom design) formula
Reference: OPB
Windshield standWindshield stand with 4 articulated rubber plates for thepreparing and installing of bonded windows. As it is used on bench vices, it is very practical and no effort is needed to move it.
Reference: PILE-RAPTORX4
Rechargeable batteries for RAPTOR kit - Warning note that these batteries are compatible with our RAPTOR kits with a serial number prior to R0005372. If in doubt, please contact us. Sold in packs of 4 For information: 4 batteries are required for the RAPTOR device.
Reference: 238-N165
In good condition Only a few minor cosmetic defects appear - 1 Only one item available 2nd LIFE guarantee: 6 months Storage case Length: 40 cm - Width: 20 cm - External height: 20 cm - Internal depth: 15 cm.
Reference: KIT-AGRAFES-ECO24
SET OF WINDSHIELD CLIPS AND STAPLES Contains the 32 most frequently used references Box size: L: 46.5cm x W: 38cm x H: 7cm See all clips in the page description
