Reference: WK24ZRS

BTB blade, 150mm for encapsulated curved glass

BTB blade, 150mm for encapsulated curved glass

Reference: WK24ZS

Serrated Offset, BTB blade, 150mm

Serrated Offset, BTB blade, 150mm

Reference: WK27M

Left hand, BTB blade, 25mm

Lame BTB main gauche 25mm(utilisation manuelle ou pneumatique)

Reference: WK27S

Left hand, BTB blade, 19mm

Left hand, BTB blade, 19mm

Reference: WK28M

Right hand, BTB blade, 25mm

Right hand, BTB blade, 25mm

Reference: WK2S

Serrated, average, universal, flat BTB blade, 240mm

Serrated, average, universal, flat BTB blade, 240mm

Reference: WK3

Multi-purpose, bent BTB blade, 200mm

Lame BTB multi-fonction plate 200mm(utilisation générale)

Reference: WK3S

Serrated, multi-purpose, bent BTB blade, 200mm

Serrated, multi-purpose, bent BTB blade, 200mm

Reference: WK4

Non-rigid, bent BTB blade, 190mm

Non-rigid, bent BTB blade, 190mm

Reference: DESTOCK-WK4RS

BTB multifunction blade, 190 mm angled, serrated

BTB multifunction blade, 190 mm angled, serrated - BTB blade for easy removal of curved and encapsulated glazing, mouldings,...

Reference: WK4S

Serrated, non-rigid, bent BTB blade, 190mm

Serrated, non-rigid, bent BTB blade, 190mm

Reference: WK4Z

Deep offset, multi-purpose BTB blade, 140mm

Deep offset, multi-purpose BTB blade, 140mm

Reference: WK4ZRS

Serrated inverted deep offset BTB blade, 140mm

Serrated inverted deep offset BTB blade, 140mm

Reference: WK4ZS

Serrated, deep offset, multi-purpose BTB blade, 140mm

Serrated, deep offset, multi-purpose BTB blade, 140mm

Reference: DESTOCK-WK7

Standard manual handle for BTB blades

 Single handle for BTB blade - Makes it easy to cut windshield and other glazing seals. Dimensions: 100 x 38 x 38 mm

Reference: WKBX

Specific case for BTB material

SPECIFIC CASE FOR BTB MATERIALREF. WKBX

Reference: WP738-E

EQUALIZER® pinchweld scraper

Used to remove urethane and butyl from the pinchweld. The tool has a hardened steel blade of 24 mm wide that can be sharpened dozens of times. - 200 x 29 x 29 mm - 120 g

Reference: WSTAND

Table stand with castor

Table stand with castorThis little stand helper with rollsallows to move forward the tableeasily, without effort.REF-WSTANDSold individually

Reference: XKD-22A

New square cutting wire, Size 0.7 mm - 22ML

Reference: XKD-44A

Square piano wire for windshield cutting - 0.7 x 0.7 mm - 44ML

Discover our new REF-XKD-44 square piano wire, designed to offer exceptional strength and meet the most demanding needs. Applications: Used for precise cutting of windscreens and automotive glazing, this rope is a must-have for bodybuilders and garages. Its sturdy, square design ensures a firm grip and greater efficiency when removing glass and similar...

Reference: XL2

Long Olfa® knife with a snap-off blade

Olfa® knife Snap-off blades have known a growing success in our filed, especially during these recent years. With this knife, you can cut the urethane that is far below the dashe of most vehicles. This knife is an extra-long version of the OLF20, it is particularly suitable for car glaziers.- 280 x 40 x 20 mm- 125 g

Reference: Z1

Cold knife blade 19 mm

Cold knife blade- Sold individually- Cutting length: 19 mm- 18gCARTON OF 10

Reference: Z30

Special cold knife blade 30 mm

This blade series enables you to use a cold knife where you could never use it before ! The 60 mm long blade isintended to cut all those hard to reach PU bondings that are far away from the glasses edge and where a normalcold knife blade could never reach. But also all lowerglass edges with surmounting wings and bonnets are aperfect field of application...

Reference: Z60

Special cold knife blade 60 mm

This blade series enables you to use a cold knife where you could never use it before ! The 60 mm long blade is intended to cut all those hard to reach PU bondings thatare far away from the glasses edge and where a normalcold knife blade could never reach. But also all lowerglass edges with surmounting wings and bonnets are aperfect field of application...

Reference: ZAW-010

Wiper puller for bolted-on wipers

Wiper puller for bolted-on wipersBecause windshield wipers have become larger, wiper arms are pressure-fitted to the posts so they will not slip. They are then secured with a nut to hold the arm in place so they will not lift. Until now, it was almost impossible to remove these wiper arms without breaking or damaging them or scratching the cowl. You no...

Reference: ZAW-025

Arm wiper puller tool

Arm wiper puller tool

Reference: ZAW-040

Arm wiper puller tool

REF. ZAW-040Arm wiper puller toolArm wiper puller tool with tighting screw for a simpleuse ( without additional tool)Adaptable for many cars

Reference: ZAW-095

Arm wiper puller tool

Arm wiper puller tool

Reference: ZAW-120

Windshield wiper arm removal tool

Extremely loadable. Made of massive metal. Can be used on virtually any passenger and commercial vehicle. Specially recommended for the BMW 5 and BMW 7 series.- 104 x 38 x 140 mm- 518 g

Reference: ZDK-500

Cold knife

Wheel step ladderBuilt with a chain to facilitate the setting when the wheel compartment and the wheel are very closer. Easy and fastadjusting system. Ready to use. The other advantage correspond to the fact it can be install for all vehicules contrary to the oldversion (rigid tube) which was fitting for only SUV and cars where the space between.The wheel...

Reference: ZK35

ZipKnife™ Cold Knife

ZipKnife™ Cold Knife has a unique design that allows you to maintain a high level of control at the cutting head, giving you the freedom to move unencumbered while exerting pressure in both cutting directions. Uses all standard cold knife blades Without blade.

Reference: 51854

50 mm Equalizer straight offset cutting blade

REF. 5185450 mm Equalizer straight offset cutting blade

Reference: 51855

U shape 19 mm Equalizer cutting blade

REF. 51855U shape 19 mm Equalizer cutting blade

Reference: 51857

U shape 38 mm Equalizer cutting blade

REF. 51857U shape 38 mm Equalizer cutting blade

Reference: DST-53

Curved wire threader 53 mm (package at 3 pièces)

Curved wire threader:The curved wire threader anables threading of the cutting wire evenwhere the gap between glass and pinch weld is very small.This is especially helpful on side and back windows where conventionalwire threaders are often difficult to use.The curved threader can be pushed through the adhesive bead from insideto outside or from outside to...

Reference: EHL-652

Lightly powdered latex gloves

Lightly powdered latex gloves  These gloves are very practical because you can touch the cutting edge of the glass without contamination.  Sold in boxes of 100. Single-use, non-sterile

Reference: G-KNYL

Pair of nylon gloves with polyurethane coating

Discover protective gloves that combine comfort and precision with our nylon pair featuring a polyurethane coating. Designed to offer exceptional flexibility, these gloves mould perfectly to the shape of your hands, guaranteeing dexterity for precision tasks. The polyurethane coating enhances grip and abrasion resistance, enabling a secure hold without...

Reference: G-POLY

Knitled / Polyurethane glaves.

Ensure your safety without sacrificing comfort with our knitted/polyurethane protective gloves, specially designed to offer maximum flexibility and high cut resistance. Thanks to their polyurethane coating, these gloves combine flexibility with optimum grip, enabling precise handling of objects and tools. The breathable knit structure ensures long-lasting...

Reference: DESTOCK-GAVI

Full finger anti – Vibration gloves

Anti-vibration glovesThese gloves limit the effects of vibrations caused by the use of cutting knives (pneumatic and power tools in general).They reduce the effects of shock, vibration and impact. Comfortable to wear thanks to its seamless knitted shell. Good breathability. Excellent grip. REF-GAVI-L - Size LREF-GAVI-XL - Size XL

Reference: GKEV

Cut-resistant knitted gloves

Our knitted gloves are tough and offer effective protection against cuts when handling glass surfaces. Latex palms provide a solid grip. Available in three sizes: M, L and XL

Reference: SHL-109

High protection knitted gloves - Size L

Knitted gloves made of cotton and nylon, very strong and comfortable to wear, for optimum grip. Hands are protected thanks to the coating and traction points inside the glove. Good sensitivity combined with high cut protection. Size L Also available in M and XL (SHM-108 and SHX-110)

Reference: SHM-108

High protection knitted gloves - Size M

Knitted gloves made of cotton and nylon, very strong and comfortable to wear, for optimum grip. Hands are protected thanks to the coating and traction points inside the glove. Good sensitivity combined with high cut protection. Size M Also available in L and XL (SHL-109 and SHX-110)

Reference: SHX-110

High protection knitted gloves - Size XL

Knitted gloves made of cotton and nylon, very strong and comfortable to wear, for optimum grip. Hands are protected thanks to the coating and traction points inside the glove. Good sensitivity combined with high cut protection. Size XL Also available in M and L (SHM-108 and SHL-109)

Reference: 1040-111

Tube for POWERPUSH 20V and 14.4V

For Pistolet Powerpush 20V et 14.4V Tube for saussage 400ml - Ref. 1040-111Tube for saussage 600ml - Ref. 1040-042

Reference: Z1022

Cold knife blade

This special blade reaches the urethane between the wheel cover and the side of the windshield.Its unique shape allows you to unbond the windshield with a cold knife, without having removed the wheel cover (also bond) before. Once the windshield is removed, you can unbond the wheel cover, wihtout risking to damage the remaining material.- Sold...

Reference: Z10RD

New COLD KNIFE BLADES SERRATED 19mm

REF-Z10RDNew ULTRAWIZ Cold knife bladeSold individually - Extra thin Cutting length: 19 mmCARTON OF 10

Reference: Z11RD

New COLD KNIFE BLADES SERRATED 25mm

REF-Z11RDNew ULTRAWIZ Cold knife bladeSold individually - Extra thin Cutting length: 25 mmCARTON OF 10

Reference: Z12RD

New COLD KNIFE BLADES SERRATED 38mm

New ULTRAWIZ Cold knife bladeSold individually - Extra thin Cutting length: 38mmCARTON OF 10

Reference: Z2

Cold knife blade 25 mm

Cold knife blade, extra fine- Sold individually- Cutting length: 25 mm- 18gCARTON OF 10

Reference: Z3

Cold knife blade 38 mm

Cold knife blade, extra fine- Sold individually- Cutting length: 38 mm- 20 gCARTON OF 10

Reference: Z4

Cold knife blade, extra fine 19 mm

Cold knife blade, extra fine cutting length: 19mm CARTON OF 10

Reference: Z5

Cold knife blade, extra fine 25 mm

Cold knife blade, extra fine - Sold individually - Cutting length: 25 mm - 18g CARTON OF 10

Reference: Z6

Cold knife blade, extra fine 38 mm

Cold knife blade, extra fine - Sold individually - Cutting length: 38 mm - 20 g CARTON OF 10

Reference: Z7

Cold knife blade coated, extra fine 19 mm

Cold knife blade coated, extra fine - Sold individually- Cutting length: 19 mm- 20gCARTON OF 10

Reference: Z7RV

New Paint Protection Reverse Bend Blade 19mm « ULTRAWIZ »

Nylon coating protects exposed paint from accidental blade contactIdeal for exposed glass with underside molding or encapsulationOffers the control a technician needs to cut awayfrom the glass or moldingAvailable in 3 lengths : 19 mm – 25 mm – 38 mm

Reference: Z8

Cold knife blade coated, extra fine 25 mm

Cold knife blade coated, extra fine - Sold individually- Cutting length: 25 mm- 20gCARTON OF 10

Reference: Z8RV

New Paint Protection Reverse Bend Blade 25mm « ULTRAWIZ »

Nylon coating protects exposed paint from accidental blade contactIdeal for exposed glass with underside molding or encapsulationOffers the control a technician needs to cut awayfrom the glass or moldingAvailable in 3 lengths : 19 mm – 25 mm – 38 mm

Reference: Z9

Cold knife blade coated, extra fine 38 mm

Cold knife blade coated, extra fine - Sold individually- Cutting length: 38 mm- 20gCARTON OF 10

Reference: Z9RV

New Paint Protection Reverse Bend Blade 38mm « ULTRAWIZ »

Nylon coating protects exposed paint from accidental blade contactIdeal for exposed glass with underside molding or encapsulationOffers the control a technician needs to cut awayfrom the glass or moldingAvailable in 3 lengths : 19 mm – 25 mm – 38 mm

Reference: KFS-300

Scraper kit in plastic case

Reference: RAPTOR

Windshield cutting system with automatic vacuum - RAPTOR

The  Raptor™ is a cord and wire auto glass removal device designed from the ground-up to dramatically improve the power of the vacuum cup with the integration of our AirForce™ Constant Vacuum Cups. This technology has been specifically developed to create a quick placement and constant vacuum to the glass so the Raptor™ stays in place and resists...

Reference: 8PY010600-911

Universal car brand diagnostic device - MEGAMACS PC

Reference: 8PD010601-931

Universal car brand diagnostic device - MEGAMACS PC

Reference: 8PD015269-101

CSC tool (VW )

Not available

Reference: DSS-175

One-man wire cut-out tool

One-man wire cut-out toolREPAREGLASSOne-man wire cut-out toolThis tool acts like another person sitting inside the vehicle pulling the wire back after you havemade your cutting stroke.Attached to the swivel is a spring that acts as a second person; you pull the wire out to make your cut and the springs pulls the wire back in. The spring is attached to a...

Reference: ECHAF-PLIABLE-3.0

2.95M folding scaffolding

Reference: ECHAFAUDAGE

3.07M MOBILE SCAFFOLDING FOR TRUCKS AND BUS

Reference: EES804

EQUALIZER® sheath 100mm

EQUALIZER® sheath 100mm The sheath is the unique, patented idea that makes the EQUALIZER® line of tools work. The sheath is a protective sleeve that surrounds the blade will not damage the dash or garnish mouldings. Sheaths are available in the three sizes: 10,20 and 30cm. The smallest one is generally used to surround small side windows. The middle size...

Reference: EES808

EQUALIZER® sheath 200mm

EQUALIZER® sheath 200mm The sheath is the unique, patented idea that makes the EQUALIZER® line of tools work. The sheath is a protective sleeve that surrounds the blade will not damage the dash or garnish mouldings. Sheaths are available in the three sizes: 10,20 and 30cm. The smallest one is generally used to surround small side windows. The middle size...

Reference: EES812

EQUALIZER® sheath 300mm

EQUALIZER® sheath 300mm The sheath is the unique, patented idea that makes the EQUALIZER® line of tools work. The sheath is a protective sleeve that surrounds the blade will not damage the dash or garnish mouldings. Sheaths are available in the three sizes: 10,20 and 30cm. The smallest one is generally used to surround small side windows. The middle size...

Reference: EGK150

Air-powered cold knife EQUALIZER® Ninja standard

The Ninja™ GT is a beefed-up version of the Ninja™. It features dual ball bearings, a more powerful engine and an exhaust silencer that routes escaping air away from the vehicle. It has a unique ability to cut under bonnets, boot lids and anything else that overhangs the glass and obstructs your ability to cut. When you encounter a bonnet, visor or boot...

Reference: ENJ147

EQUALIZER® Ninja standard kit

The Equalizer Ninja and Ninja GT are revolutionary auto glass removal tools that allow you to remove any glass fast and effortlessly. They have the look and feel of a cold knife, but cut with the power of 22,000 cutting strokes per minute. Here is how they work: the blade moves back and forth at22,000 strokes per minute. As you pull the Equalizer Ninja...

Reference: ENK148

EQUALIZER® Ninja deluxe kit

The Equalizer Ninja and Ninja GT are revolutionary auto glass removal tools that allow you to remove any glass fast and effortlessly. They have the look and feel of a cold knife, but cut with the power of 22,000 cutting strokes per minute. Here is how they work: the blade moves back and forth at22,000 strokes per minute. As you pull the Equalizer Ninja...

Reference: FSC1.7BAT

FEIN battery knife without blade

Discover an innovative, high-performance solution for automotive work, combining power, precision and practicality. Technical specifications: Battery voltage: 18 V Battery capacity: 5 Ah Oscillations: 10,000 - 19,500 rpm Weight with battery: 1.8 kg Amplitude: 2 x 1.7 Tool holder: hexagonal Please note: Supplied without blade, battery or charger. -...

Reference: FSC1.7QBAT

FEIN battery knife + 12 blades

Optimize your cutting tasks with this FEIN battery-powered knife, a high-performance tool designed to meet the needs of demanding professionals. Supplied with a complete set of 12 blades, two batteries and a charger, it offers everything you need for precise, efficient cutting. Key features: Exceptional versatility: Suitable for a wide variety of jobs...

Reference: FZS-128

Large PVC hood protection covered with foam.

HOOD PROTECTION - 1400 x 1840 mm Several sizes available: FENDER PROTECTION: Suitable for fender protection - 1400 x 800 mm FRONT PROTECTION: Suitable for front panel protection - 1900 x 700 mm CUSTOM DESIGN: Contact us Can also be made to measure on request for glazing, lorries, buses, underground railways, public works, etc.

Reference: GBM-27

27 PCS Trim Removal Kit

The essential tool for precise, safe disassembly of bodywork and interior components. This set of 27 spatula levers is specially designed to meet the needs of bodybuilders and garages. It makes it easy to dismantle mirror faces, interior trim and other delicate components, without requiring the use of other protection. Advantages: Safe work: Allows work...

Reference: GCN-100

Nylon wire - ø 1,1 mm - 100ML

L: 100M 2500 NEWTON Nylon wire- Diam 1.1mm ESPECIALLY DESIGN FOR THICK AND HEAVY PU Ideal for : -Old urethane -Thick and heavy PU -Trims which must not brake ( clips – fastener – spacers) -Brakes at an high tensile strength -Reusable length ( from about 2 to 4 applications) -Do not scratch surfaces -Could be use with most of the ratchet systems...

Reference: GEZ-150-1

Set of vacuum lifter - -load capacity 30kg

Vacuum lifterØ 150 mm REPAREGLASSThese vacuum lifter have been specially designed for windsheild setting and removal.Their unique shape allows a good hand holding. The flowing shape and the smooth surface of the handles allow a greater control of large windows.To install a windshield, we ercommend beginning by doing a test. The setting of the windsheild...

Reference: GEZ-543-1

Set of vacuum lifter -load capacity 62kg

Vacuum lifterØ 150 mmREPAREGLASSThese vacuum lifter have been specially designed for windsheild setting and removal.Their unique shape allows a good hand holding. The flowing shape and the smooth surface of the handles allow a greater control of large windows.To install a windshield, we ercommend beginning by doing a test. The setting of the windsheild...

Reference: LH-683

Christmas tree moulding remover

Reference: LM-460

Long knife with a blade

Long knife with 1 blade Some vehicles have extra-long dashes. So you have to cut the bond from the inside. As long as the band of urethane is not too thick, you can use knives designed to cut urethane. Two lengths are available: 46 cm (standard) and 61 cm (designed for vehicles with a high windshield slope and with ewtra-long dashes). Both are made of...

Reference: LM-610

Long knife with a blade

Long knife with 1 blade Some vehicles have extra-long dashes. So you have to cut the bond from the inside. As long as the band of urethane is not too thick, you can use knives designed to cut urethane. Two lengths are available: 46 cm (standard) and 61 cm (designed for vehicles with a high windshield slope and with ewtra-long dashes). Both are made of...

Reference: NSE-827

Telescopic glass rack with 5 compartments, with unscrewing and removing tubes

Delivered without castors

Reference: NSE-828

Telescopic glass rack with 9 compartments, with unscrewing and removing tubes.

Delivered without castors

Reference: PSH-120

Pair of suction cups - Load capacity: around 80kg

Pairof suction cups (Ø 120 mm)Vacuum cups allow you to hold safely a window that is ready to install. The edge of the window must not be touched once the window is ready for the installation. Each vacuum swivels up and down approximately 30° to fit radically contoured glass. Simply set the vacuum cups in place and push the thumb latches down to engage the...

Reference: PWR-2020

Ultrasonic leak detector and transmitter, delivered in a plastic tool box

Ultrasonic leak detector and transmitter Bonded windows have very often leaks that are difficult to detect. With our leak detector, you can easily find the leaks. The leak detector consists of a detector and a transmitter. The transmitter sends an ultrasound (human beings cannot hear it) in the compartment. From the exterior, you place the reception...

Reference: UCM1529-1600

30M roll of seals plastic frame after windshield replacement

Our seals for plastic windows have been designed to solve the problems associated with the difficulty of maintaining a good seal on plastic windows after the windshield has been replaced, or even when it has to be replaced when it is damaged, torn or broken. This specific roll of seal has been designed for simple, effective installation thanks to its...

Reference: VB19105

TRIM CLIP COMPOUND - CITROEN

Sold in packs of 10

Reference: VB19105

TRIM CLIP COMPOUND - FIAT

Sold in packs of 10

Reference: VB19105

TRIM CLIP COMPOUND- LANCIA

TRIM CLIP COMPOUND- LANCIA PhedraSold in packs of 10 REF-VB9105 - Trim clip compound - N°20 Typology: Trim clip compound Colour: White For Renault Clio II - 1998, Clio III - 2005, Megane, Kangoo, Kangoo II Door - panel Clio II - 1998, Clio III - 2005, Megane, Kangoo, Kangoo II Trim Clio II - 1998, Clio III - 2005, Megane,...

Reference: VB19105

TRIM CLIP COMPOUND - PEUGEOT

TRIM CLIP COMPOUND - PEUGEOT 207, 807, Expert III, Partner, Partner Tepee, 407Sold in packs of 10 REF-VB9105 - Trim clip compound - N°20 Typology: Trim clip compound Colour: White For Renault Clio II - 1998, Clio III - 2005, Megane, Kangoo, Kangoo II Door - panel Clio II - 1998, Clio III - 2005, Megane, Kangoo, Kangoo II Trim...

Reference: VB19105

TRIM CLIP COMPOUND - RENAULT

Sold in packs of 10

Reference: ZDK-395

Cold knife with neoprene cover

Cold knife with neoprene cover REPAREGLASS To prevent paint damage and for more handiness. This knife is one of the most useful tools for windshield installers. It has been used for 30 years worldwide and has hardly ever been changed during that time.One evolution had tobe taken into account though: paint jobs have become more complicated. Generally, many...

Reference: ZLN-914

Nylon wire - Ø 1.05 mm, Longueur : 100 ML - 2000 Newton

- Multi-purpose with 1 length (approx. 2 to 4 uses) - Does not scratch surfaces - No snags on the windscreen bay or windscreen seal - Can be used with all ratchet systems - Very fine Ø 1.05 mm, Length: 100 M 2000 Newton

Reference: CC-1058

NITRILE elastic and stretch gloves (NON-POINTED)

Raw material: Nitrile rubber. Does not contain natural rubberized latex. The components used to manufacture gloves may cause allergic reactions in some users. Good quality nitrile gloves providing an excellent biological barrier. Store in a cool, dry place, avoiding excessive heat (40°C, 104°F). Open box must be protected from direct sunlight and UV...

Reference: SYSTEME-PROTECTION-DE-BAIE

Pinchweld protection system

Everyprotector they used could not withstand repeated hits by a power tool blade and would jump out of the pinchweld,leaving the paint exposed to potential harm. Tape worked to some extent, but would not hold sufficient downward pressure tokeep the pinchweld protector in place.This kit includes 4 different lengths of a high impact metal that will absorb...

Reference: KIT-32

Windscreen tool case (32 items)

Reference: KIT-BTB

BTB kit

BTB range in the case: Pneumatic windshield removalVery lightweight knife: 1,1kg – Very little physical effort – Cutting of interior or exterior- Air consumption: between 30m/min and 104l/min maxi. Very silent, vibration complying with the European directive 2002/44/CEBTB kit: Contains: - 1 operating instruction- 1 CD- 1 pneumatic knife REF-WK10HD - 1...

Reference: 8PY010600-041

LICENCE HOTLINE 50 TICKETS

Not avalaible